User's Manual

Chapter 6 — Viewing and Changing Settings
WWAN Communicator User’s Guide 53
Changing Connectivity Settings
Choose Connectivity Settings in the Data Connect screen to change
connectivity settings for any connection.
To change connectivity settings
1 In the Data Connect screen, choose Connection Settings.
2 Under Select Settings to Configure, choose Connectivity Settings and
then tap . The Data Settings screen appears.
3 Choose a connection from the PSD or CSD drop-down menu.
• To change the connection settings, continue with the next step.
• To set the connection as the default, continue with Step 5.
4 Tap a field to select it and use the 760 keypad to enter connectivity
settings:
Connectivity
Setting
Description Default Maximum
Reconnect delay
(ms)
Amount of time Communicator waits
until reconnecting.
5000 ms 99000 ms
Modem initialize
delay (ms)
Delay before the modem is initialized. 5000 ms 99000 ms
Connect retries Number of times the radio will try to
reconnect if the first try is unsuccessful.
299
Reconnect when
failed
Reconnects whenever the OS signals a
lost connection
Timeout The number of minutes reconnection
will be attempted
5 10000
Use backup CSD
on PSD fail
Utilizes the CSD connection whenever
PSD fails
Reconnect on
start-up (PSD
only)
Reconnects your PSD connection
whenever the Communicator is started