User's Manual

Chapter 6 — Viewing and Changing Settings
WWAN Communicator User’s Guide 55
Importing Connections
If you chose Import connections, you can browse to a publicly defined
connection file and use it as a template for your own connection.
To import a connection file
1 Tap . The Import Connection screen appears.
2 Tap Browse to browse to a connection file, or enter the path to the
connection file. You can use the 760 keypad or the virtual keypad.
• To use the virtual keypad, tap . For help, see “Using the Virtual
Keypad” on page 8.
3 Tap . The connection file is imported and the Select screen appears
with the connection file you chose in the Publicly Defined
Connections list as shown in this example:
4 Tap . A dialog box appears asking if you want to make this
connection the default or use it as a template for a new connection.
5 Choose one and tap OK:
• If you chose to make the connection the default, the Data Connect
screen appears with the new default connection in the Connection
Typ e li st .
• If you chose Use as Template, the Settings screen for the type of
connection you chose appears. Continue with Step 5 of “Adding a
Connection or Changing Existing Settings” on page 48.