User's Manual

NOVATEL WIRELESS
TECHNOLOGIES LTD.
Calgary, Alberta
TITLE:
Hardware Interface Specification for
Expedite Wireless IP Modem
DOCUMENT NO.:
OM-01016529
SHEET:
8 of 17
REV:
3.0
4.1.1.2 Surface Mount Mating Connector Options
Description: 24-pin, 1.27 mm pitch, SMT, double row, zero profile, pin type header
Samtec part number: DIS5-112-52-F-D-VS
NOTE: This connector provides the lowest profile interface solution.
Description: 24-pin, 1.27 mm pitch, SMT, double row, low profile, pin type header
Samtec part number: FTS-112-03-F-DV
4.1.1.3 Through-Hole Mating Connector Options
Description: 24-pin, 1.27 mm pitch, T/H, double row, zero profile, pin type header
Samtec part number: DIS5-112-52-F-D
Description: 24-pin, 1.27 mm pitch, T/H, double row, low profile, pin type header
Samtec part number: FTS-112-03-F-D
4.1.2 RF Antenna Connector Type
Expedite Wireless IP Modem antenna connector:
Description - MMCX Coaxial Connector
Manufacturer - Huber and Suhner
Part Number - 82MMCX-S50-0-2
NOTE: An equivalent connector by the same or another manufacturer may be used.
Impedance - 50 ohm
Expedite Wireless IP Modem mating antenna connector:
Mating connector: - AEP 8905-1521-003 or equivalent with RG316 cable.