User's Manual Part 2

Chapter 2 — Connecting and Configuring the Printer
PD41 and PD42 Commercial Printer User’s Guide 43
Configuring General Network Settings
Use the General network page to view the printer name, change
passwords, and set restrictions.
To configure general network settings
1 Click Network Admin > General.
2 View or update your settings.
3 Click Submit General settings.
Use the following table to understand the general network settings.
Note: To enter a new password, you need to check the Set
password check box.
Understanding the General Network Settings
Setting Description
Printer Name The network identification name (WINS name)
of the printer. The default name is INTERMEC
followed by the last six positions of the MAC
address.
System Location (Optional) The printer location.
System Contact (Optional) The printer administrator.
Set Password You must check this box if you want to change
the admin password.
Old Admin Password You need to enter the old password before you
can change the password.
New Admin Password The new password you want to use.