User's Manual Part 2

Chapter 2 — Connecting and Configuring the Printer
50 PD41 and PD42 Commercial Printer User’s Guide
Configuring 802.1x Settings
You only see the 802.1x settings page if you have the optional wireless
interface installed in your printer. Use the 802.1x page to view and
change 802.1x security settings.
To configure 802.1x settings
1 Click Network Admin > 802.1x.
2 View or update your settings.
3 Click Submit 802.1x settings.
Authentication Sets the type of authentication for you use for WEP
keys. You can choose between Auto, Open System,
and Shared.
WPA Sets the Wi-Fi Protected Access (WPA) to either on
or off.
WPA Pre-shared key Sets the WPA Pre-shared key.
WPA2 Sets the Wi-Fi-Protected Access version 2 to either
on or off.
Roaming setting Sets the roaming reluctancy to 1, 2 or 3.
Current channel (Read only) The MAC address of the access point
AP MAC Address (Read only) MAC address of the access point to
which the printer is connected.
Signal strength (Read only) Radio signal strength of the access
point.
Speed (Read only) Speed of the current connection.
Region (Read only) Shows the country short names
provided by the 802.11d standard for the currently
selected region or country.
Understanding the Wireless LAN Settings (continued)
Setting Description