User's Manual Part 2

Chapter 3 — Troubleshooting and Maintaining the Printer
74 PD41 and PD42 Commercial Printer User’s Guide
To adjust the printhead dot line
1 If you have installed thermal transfer ribbon, remove it and close
the printhead.
2 Use a slotted screwdriver to turn the two screws at the top of the
printhead bracket counterclockwisea single turn.
3 Pull out on the printhead lever and turn it counterclockwise to lift
the printhead.
4 Carefully turn both screws, at the front of the printhead, clockwise
a quarter of a turn at a time.