User's Manual

Chapter 1 — Using the PB50 Mobile Label Printer
PB50 Mobile Label Printer User’s Guide 3
The current firmware type and version display on the PB50
screen when the printer is in Ready mode.
The screen of a PB50 running IPL firmware
Understanding the Control Panel
The PB50 control panel contains four buttons, a liquid crystal
display (LCD), and one LED indicator. Use the four buttons to
navigate the menu system and perform functions on the PB50
printer. See the following tables to understand the buttons, the
menu system, and what the LED means.
PB50 Control Panel: Use this illustration to familiarize yourself with the
buttons and lights on the PB50.
SETUP:
SER-COM
IPL 11.1.0
Understanding How to Use the PB50 Buttons
Button
Name
Button Function
Feed Press to advance label or receipt paper. The
amount of media that feeds is dependent on the
type of media you are using. It will advance by 5
mm (0.2 inch), feed out an entire label, or feed a
configured length of media based on your media
and settings.
If the printer is printing, pressing this button
causes the printer to pause. Press the button
again to resume printing.
SETUP:
SER-COM
Setup button
Feed button
Standby button
Info button
Ready-to-Work
indicator