User's Manual

Chapter 2 — Configuring the PB50
16 PB50 Mobile Label Printer User’s Guide
Configuring the PB50
You can change the configuration settings of the PB50 printer
directly from the display, by sending commands from your PC,
by using the web pages, or remotely from the SmartSystems
console.
For more information on the IPL and Fingerprint menu systems,
see“IPL and Fingerprint Setup Menus” on page 53.
Understanding the Display Modes
The PB50 has six display modes to help you effectively interact
with the printer: Ready, Information, Paused, Setup, Error, and
Test. Use the following sections to understand the different
printer modes
Understanding Ready Mode
The printer is in Ready mode when the printer is on and ready to
print. The main screen displays the power status, the radio status,
and the printer language and version.
The PB50 in Ready Mode
Understanding Information Mode
When the printer is in Information mode, it displays a subset of
pertinent information about the printer. If the printer
experienced an error, the error message displays first followed by
the printer information. Each message displays on the screen for
five seconds. After five seconds on the last information screen, the
printer exits Information mode.
The PB50 in Information Mode
SETUP:
SER-COM
IPL 11.1.0
SETUP:
SER-COM
I/O serial 5
8N1 9600
X