User's Manual

Chapter 2 — Configuring the PB50
18 PB50 Mobile Label Printer User’s Guide
Once you enter Setup mode, there are two editing modes: normal
and enhanced.
Normal Editing Mode: In normal editing mode, you see an up arrow and a
right arrow for making selections.
Enhanced Editing Mode: In enhanced editing mode you have a plus sign and
a right arrow to change the value of numeric fields.
Understanding Error Mode
The printer enters Error mode when it detects an error condition
such as a low battery or a paper fault. Some error messages appear
on the screen immediately when they occur, such as DOOR
OPEN. Other error messages do not appear until you press the
Information button. If there is more than one error at a given
time, the errors display in the order that they occurred.
Editing Settings in Setup Mode
Editing Mode To Navigate To Accept Value
Normal • Press to move among
choices.
• Press to go up a level in
menu system.
Press .
Enhanced • Press to move within the
editable fields. When the
field blinks, you can edit it.
• Press to increase the
value of the field.
Press .
BAUDRATE:
9600
+
IP ADDRESS:
130.42.240.102