User's Manual

Chapter 2 — Configuring the PB50
26 PB50 Mobile Label Printer User’s Guide
To set up Bluetooth communications with a mobile computer
• Follow the procedure to discover and connect to Bluetooth
devices in your mobile computer user’s manual.
To set up Bluetooth communications with a scanner
1 Download and install EasySet.
2 Create the following bar code labels using EasySet:
• Administrator reset factory defaults
• Bluetooth parameters - security - not active
• Bluetooth parameters - connect/disconnect - compose BT
address
• Bluetooth parameters - security - compose PIN:
3 Scan the bar code labels with the Bluetooth scanner.
Setting Up 802.11 Radio Communications
The PB50 can have an internal 802.11 b/g radio to transfer and
receive data using wireless communications. This manual
assumes that you have already set up your wireless
communications network including your access points. The
following procedures include information on setting up wireless
security for both IPL and Fingerprint versions of the PB50.
Note: For maximum security, you need to configure a
Bluetooth passcode for the PB50. The default passcode for the
PB50 is “1234.”
Understanding Bluetooth Radio Icons
Icon Description
The Bluetooth radio is on and the printer is not connected to
a serial cable.
The Bluetooth radio is turned off. The Bluetooth radio turns
off when you connect a serial cable.