User's Manual

Chapter 2 — Configuring the PB50
34 PB50 Mobile Label Printer User’s Guide
Setting Up Serial Communications
Use a serial cable (P/N 075497-001) to connect the PB50 to a
PC or a mobile computer. For the mobile computer, you may
need to purchase a serial adapter. For more information, contact
your local Intermec sales representative.
Before you can establish a serial connection, you need to make
sure that the settings on the PC or mobile computer match those
of the PB50.
To connect the PB50 to a PC or mobile computer
1 Connect the 8-pin circular DIN connector to the serial port
on the PB50.
2 Connect the other end of the serial cable to a serial port on
the back of your PC or to a serial adapter on your mobile
computer.
Serial Port Settings on the PB50
Parameter Default Setting
Baud rate 115200
Data bits 8
Parity None
Stop bits 1
Flow control XON_XOFF (IPL)
No default (Fingerprint)
Serial
cable
Serial
port