User's Manual

Chapter 2 — Configuring the PB50
36 PB50 Mobile Label Printer User’s Guide
3 From the Firmware upgrade page, browse to the upgrade
firmware file.
4 Click Upgrade.
To upgrade your printer using a serial connection
1 Make sure you have established a serial communications
between your PC and the PB50. For help, see “Setting Up
Serial Communications” on page 34.
2 Use Fingerprint or IPL commands to send the upgrade file to
the printer.
For help with Fingerprint or IPL commands and information, see
either the Fingerprint Programmer’s Reference Manual
(P/N 937-005-xxx) or the IPL Programmer’s Reference Manual
(P/N 937-007-xxx). You can download both documents from the
Intermec web site at www.intermec.com.
Downloading Fonts and Graphics
The easiest way to download fonts and graphics is to use the free
Intermec printer application called PrintSet. You can download
PrintSet from the downloads page for the PB50 printer on the
Intermec web site at www.intermec.com. Follow the procedures
in the PrintSet online help to download fonts and graphics.
You can also use Fingerprint or IPL commands to send fonts and
graphics to the printer. For help with commands and
information, see either the Fingerprint Programmer’s Reference
Manual (P/N 937-005-xxx) or the IPL Programmer’s Reference
Manual (P/N 937-007-xxx). You can download both documents
from the Intermec web site at www.intermec.com.