User's Manual

Chapter 3 — Troubleshooting and Maintaining the PB50
PB50 Mobile Label Printer User’s Guide 39
Possible PB50 Error Icons and Messages
Error Icon Error Message Description
Pause The print job is paused.
Paper out (IPL)
Out of Paper
(Fingerprint)
The printer is out of paper. Load a
new roll of media. For help, see
“Loading Media” on page 10.
Testfeed not done The printer did not perform a test
feed before it printed out test labels. It
is important to perform a test feed
because it calibrates the sensor.
To per fo r m a t e s tf e e d :
• In Fingerprint, press the Feed
button for more than 1 second.
• In IPL, open and close the media
door and then Press the Feed
button.
‘
Printhead hot The printhead is overheated and
needs to cool down. In IPL, wait for
printing to resume automatically. In
Fingerprint, your print job is lost.
Upgrading The printer is loading new firmware.
LSS too high, LSS
too low
These errors can occur when you run
a test feed without any media
installed, or if you have incorrect
media settings.
Load the printer with media (see
“Loading Media” on page 10), run
Tes t m o d e ( see “Using Test Mode” on
page 19), and select the appropriate
media type.
IP configuration
error
The printer is trying to acquire an IP
address from the network. Wait for
the printer to complete the task before
taking any action.
IP link error No network connection.