User's Manual

Appendix A — Specifications
PB50 Mobile Label Printer User’s Guide 49
Receipt roll stock media is supplied as a continuous roll. Label,
tag, and fanfold media use repeat indicators for non-continuous
media. Gap, notch, and black marks are used as repeat indicators:
• Gap: Label and fanfold media
• Notch: Tag m e d ia
• Black mark: Label, tag, and fanfold media
Here are a few things to keep in mind when ordering media for
the PB50 printer:
• Black marks can only be sensed on the back side of the media.
• You can use higher caliper media in the printer, but print
quality will be reduced.
• Receipt roll stock media has an end of roll indicator. The end
of roll indicator is a red marking (on last 3 feet of roll) on the
thermally sensitive side of the paper.
Media Specifications
Core inside diameter, standard: 19 mm (0.75in)
Core inside diameter, with adapter: 10.2 mm (0.4 in)
Maximum roll outside diameter: 67.3 mm (2.65 in)
Media width, label with liner/receipt: 49mm (1.9 in) to 111.5 mm (4.4 in)
Media length, label: 25.4 mm (1.0 in) to 609.6 mm (24 in)
Media length, receipt: Continuous
Media caliper, label with liner/receipt: 0.05 mm (0.002 in) to 0.165 mm (0.0065 in)
Media caliper, tag (maximum): 0.15 mm (0.006 in)
Gap length (centered on perforation): 3.17 mm (0.125 in) to 12.7 mm (0.50 in)
Notch length (centered on perforation): 6.35 mm (0.25 in)
Notch width (centered on perforation): 12.7 mm (0.50 in)
Black mark length (centered on perforation): 3.17 mm (0.125 in) to 12.7 mm (0.50 in)
Black mark width (centered on media width): Full width of media
External Fanfold Media Specifications
Stack height: 70 mm (2.75 in)
Page length: 152 mm (6 in) to 305 mm (12 in)