User's Manual

Appendix A — Specifications
50 PB50 Mobile Label Printer User’s Guide
Specialty media is required for unique customer environments,
including printer operating temperature extremes. Intermec
recommends that you test the media in your application.
Supported Media
The PB50 printer supports direct thermal label, tag, and receipt
media. Both North American and European label media are
supported in multiple label lengths. Receipt media is supported
in both a top coated and an uncoated paper in continuous roll
stock only.
The default media sensitivity number is: 180.
Use the following table as a guide when setting sensitivity
numbers.
Note: A 6-inch page length is supplied in 12-inch long stacks
(two 6-inch stacks of equal height with the bottom page linked).
Recommended Media Sensitivity, Constant, Factor, and Print Speed
Sensitivity Constant Factor Description Max Print Speed
North American Label Media
720 60 40 Duratherm Lightning Plus 4 ips
470 52 40 Duratherm Lightning 4 ips
450 48 40 Duratherm Lightning 2 ips
430 100 40 Duratherm Synthetic 4 ips
180 80 40 Duratherm II Label 4 ips
180 80 40 Duratherm III Label 4 ips
180 80 40 Duratherm Near IR 4 ips
150 50 40 Duratherm 5 mil Tag 2 ips
North America Receipt Media
401 45 40 Duratherm TC 2 ips
102 32 40 Duratherm NTC - 2 2 ips
101 30 40 Duratherm NTC 2 ips
European Label Media
440 47 30 Thermal Eco 2 ips
140 70 40 Thermal Top 4 ips