User's Manual

Configurable SettingsAppendix —A
239700 Series Color Mobile Computer User’s Manual
To Enable WEP Encryption
1 Set 8021x Security as “None.”
2 Set Association to either “Open” if WEP keys are not required; or
“Shared” when WEP keys are required for association.
3 Set Encryption to “WEP” (see page 236).
4 If you had set Association to “Shared,” then select a data transmission
key from the Data TX Key drop-down list near the bottom of this
screen, then enter the encryption key for that data transmission in the
appropriate Key # field.
To Enable WPA E ncryption Using a Preshared Key
1 Set 8021x Security as “None.”
2 Set Association to “WPA” (see page 236).
3 Enter the temporal key as ASCII (12345) in the Pre-Shared Key field.