Operation Manual

ManualsBrandsIntermec ManualsComputers700 Series Color

700 Series Color

Mobile Computer

User's Manual

Summary of content (298 pages)

PAGE 1
User's Manual 700 Series Color Mobile Computer
PAGE 2
Intermec Technologies Corporation Worldwide Headquarters 6001 36th Ave. W. Cedar Rapids Technical Communications 550 Second Street SE Everett, WA 98203 U.S.A. Cedar Rapids, IA 52401 U.S.A. www.intermec.com The information contained herein is provided solely for the purpose of allowing customers to operate and service Intermec-manufactured equipment and is not to be released, reproduced, or used for any other purpose without written permission of Intermec Technologies Corporation.
PAGE 3
Document Change Record This page records changes to this document. The document was originally released as Revision A. Revision Letter Date Description of Change B 11/2002 Added information about the Siemens MC45 radio module, the tethered scanner, CAB extraction, FTP Server parameters, and Data Collection control panel applet imager options.
PAGE 4
iv 700 Series Color Mobile Computer User’s Manual
PAGE 5
Contents Contents Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xv Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xv Global Services and Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xv Warranty Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 6
Contents Resetting Your 700 Color Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Performing a Warm-Boot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Performing a Cold-Boot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Software Build Version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 7
Contents Writing on the Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Selecting the Writing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Converting Writing to Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Drawing on the Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Creating a Drawing . . . . . . . . .
PAGE 8
Contents 3 Inbox: Sending and Receiving E-mail Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Synchronizing E-mail Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Managing E-mail Messages and Folders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Connecting to a Mail Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Composing and Sending Messages . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 9
Contents Replicating 700 Color Settings Using the Registry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Deleting the Old Registry File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Downloading the RegFlush CAB File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Loading the Registry Save Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Confirming the New Registry File . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 10
Contents 5 Phone Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Microsoft Phone Application (761 Computers with CDMA Radios) . . . . . . . . . . . . . . Data Provisioning (Sprint) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Data Provisioning (Verizon) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Phone Application . . . . . . . . . . . . . . . . . . . . . .
PAGE 11
Contents NPCP Printer Communications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165 Sample Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 NPCP Error Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 O’Neil Printer Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 12
Contents Customization and Lockdown . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 202 FTP Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Configurable Parameters Via the Registry Editor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BlockSize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 13
Contents Scan Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 226 Sample View of Registry Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 228 A Configurable Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 229 Configuration Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 14
Contents I Index Classes and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 262 General Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 267 Files Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 15
Before You Begin Before You Begin This section provides you with safety information, technical support information, and sources for additional product information. Safety Information Your safety is extremely important. Read and follow all warnings and cautions in this document before handling and operating Intermec equipment. You can be seriously injured, and equipment and data can be damaged if you do not follow the safety warnings and cautions.
PAGE 16
Before You Begin Telephone Support These services are available from Intermec Technologies Corporation. Service Description In the U.S.A. and Canada call 1-800-755-5505 and choose this option Order Intermec products S Place an order. 1 and then choose 2 Order Intermec media Order printer labels and ribbons. 1 and then choose 1 Order spare parts Order spare parts. 1 or 2 and then choose 4 Technical Support Talk to technical support about your Intermec product.
PAGE 17
Before You Begin The Intermec web site at www.intermec.com contains our documents (as PDF files) that you can download for free. To download documents 1 Visit the Intermec web site at www.intermec.com. 2 Click Service & Support > Manuals. 3 In the Select a Product field, choose the product whose documentation you want to download. To order printed versions of the Intermec manuals, contact your local Intermec representative or distributor.
PAGE 18
Before You Begin xviii 700 Series Color Mobile Computer User’s Manual
PAGE 19
1 Introduction This chapter introduces the 700 Series Color Mobile Computer, developed by Intermec to enhance wireless connectivity needs. This chapter contains hardware and software configuration information to assist you in making the most out of your 700 Color Computer. Note: Desktop icons and applet icons are shown to the left.
PAGE 20
Chapter 1 — Introduction AB10 Battery The 700 Color Computer comes with a 14.4 Watt-hour, 7.2V, replaceable Lithium-Ion (LiIon) battery. The 730 Computer comes with an 8.8 Watt-hour, 3.7V, replaceable LiIon battery. To view the status of the battery, tap Start > Settings > the System tab > the Power icon > the Power tab to view the current status of both the main AB10 battery and the backup battery. Tap ok to exit this information.
PAGE 21
Chapter 1 — Introduction If you have at least one device in your 700 Color Computer (radio, scanner, imager, or Ethernet), the battery power fail level is set so that after the system shuts down in a low battery condition, there is still sufficient charge to allow the unit to remain configured, keep proper time, and maintain DRAM (Dynamic Random Access Memory) for at least 23 to 32 hours at room temperature if the main battery remains in the mobile computer.
PAGE 22
Chapter 1 — Introduction Ambient Light Sensor Note: This information does not apply to the 730 Computer. The ambient light sensor turns on the display lighting when conditions warrant but automatically turns if off again as surrounding light increases. This conserves your 700 Color battery power. Ambient Light Sensor Ambient Light Sensor This illustration shows the 700 Color Computer with a numeric keypad (left) and an alphanumeric keypad (right).
PAGE 23
Chapter 1 — Introduction Speaker A speaker capable of variable volume levels is located on the back of the computer. This speaker has a transducer volume of 85 dB min at 10 CM and a frequency range of 1–8 KHz. Speaker 700 Color Computer Speaker 730 Computer Warning: Do not place the speaker next to your ear when the speaker volume is set to “Loud” (maximum), or you may damage your hearing. Microphone The built-in microphone is located on the bottom of the unit next to the Hirose docking connector.
PAGE 24
Chapter 1 — Introduction External Headset Jack The external headset jack connects a mobile phone style headset to your mobile computer for use in noisy environments. The jack is a 2.5 mm, three-conductor jack, with autosensing of the headset jack insertion which disables the internal speaker and microphone. The external headset jack is located on the bottom of the mobile computer next to the Hirose docking connector. Headset jack Charging/Docking connector This is the bottom of the 700 Color Computer.
PAGE 25
Chapter 1 — Introduction Beeper Note: Each time the 700 Color Computer is cold-booted, all default settings are restored unless registry storage is enabled. See page 232 for information on enabling the registry storage. To learn about setting volume levels for screen taps, ActiveSync alert noises, etc., tap Start > Help > Pocket PC Basics, then select Notifications. Enable the Beeper To enable the beeper, tap Start > Settings > the Personal tab > Sounds & Notifications > the Volume tab.
PAGE 26
Chapter 1 — Introduction 2 Tap the Input Mixing tab, then clear the SCAN Mute box. 3 Drag its slider bar to the appropriate level of loudness, with the left side being the most loud and the right side being the most quiet. Tap ok to exit this applet. Select a Beeper Volume Note: The 730 Computer does not support the laser scanner. To determine your PSM Build version, tap Start > Programs > File Explorer > the Flash File Store folder > the PSMinfo text file.
PAGE 27
Chapter 1 — Introduction Disable the Beeper To disable the beeper, tap Start > Settings > the Personal tab > Sounds & Notification > the Volume tab. Drag the System volume slider completely to the left to “Silent,” then tap ok to exit this applet. Intermec Settings Applet Use the Intermec Settings applet to gather, view, and update device configuration settings.
PAGE 28
Chapter 1 — Introduction Keypads Instructions for the keypad include the following: 700 Color Keypads The following keypads are available for the 700 Color Computer. Numeric keypad Alphanumeric keypad Backlight for Keypad Note: This information does not apply to the 730 Computer. You can configure your keypad to turn on a backlight to assist you when you are working in low lighting. To adjust the backlight for the keypad, tap Start > Settings > the System tab > Backlight.
PAGE 29
Chapter 1 — Introduction Key Sequences Use the following key sequences to enter characters into your 700 Color Computer using either a numeric keypad or an alphanumeric keypad. [Gold] or [Gold/White] Plane Keys The [Gold] b plane key (numeric keypad) or the [Gold/White] c plane key (alphanumeric keypad) provides you access to display controls, special characters, and Pocket PC options. Press the [Gold] b key or the [Gold/White] c key for each gold plane key stroke you wish to make.
PAGE 30
Chapter 1 — Introduction Alphanumeric Keypad Note: This information does not apply to the 730 Computer. The following table lists sequences that use the [Gold/White] c plane key. See Chapter 2, “Windows Mobile 2003,” for information about the Pocket PC applications. Press the Keys To Do This [Gold/White] c I Toggle the backlight on or off (also goes through backlight power levels if held down) [Gold/White] c A Access the Pocket PC Record application (see Note).
PAGE 31
Chapter 1 — Introduction To Enter Press the Keys To Enter Press the Keys a F 2 A F 1 2 b F 2 2 B F 1 2 2 c F 2 2 2 C F 1 2 2 2 d F 3 D F 1 3 e F 3 3 E F 1 3 3 f F 3 3 3 F F 1 3 3 3 g F 4 G F 1 4 h F 4 4 H F 1 4 4 i F 4 4 4 I F 1 4 4 4 j F 5 J F 1 5 k F 5 5 K F 1 5 5 l F 5 5 5 L F 1 5 5 5 m F 6 M F 1 6 n F 6 6 N F 1 6 6 o F 6 6 6 O F 1 6 6 6 p F 7 P F 1 7 q F 7 7 Q F 1 7 7 r F 7 7 7 R F 1 7 7 7 s F 7 7 7 7 S F 1 7 7 7 7 t F 8
PAGE 32
Chapter 1 — Introduction To Enter Press the Keys To Enter Press the Keys e d E E d g E f d F F d g F g d G G d g G h d H H d g H i d I I d g I j d J J d g J k d K K d g K l d L L d g L m d M M d g M n d N N d g N o d O O d g O p d P P d g P q d Q Q d g Q r d R R d g R s d S S d g S t d T T d g T u d U U d g U v d V V d g V w d W W d g W x d X X d g X y d Y Y d g Y z d Z Z d g Z LEDs The battery status LED B and the
PAGE 33
Chapter 1 — Introduction Scanning/Keypad Shift and Notification LED LED Color and Action Description Momentary Green Indicates a good scan. Blinking Green Indicates the scanner is initializing. Steady Red Indicates the keypad is shifted to Alpha (Blue) and the 700 Color Computer is turned on. Blinking Red Indicates the WAN (GPRS or CDMA) radio is on when the 700 Color Computer is in suspend mode. Also indicates when the WAN radio is initialized on 761 Computers.
PAGE 34
Chapter 1 — Introduction Resetting Your 700 Color Computer Performing a Warm-Boot Performing a warm-boot may be necessary to correct conditions where an application stops responding to the system. It does, however, unload all running programs. Press and hold the I/O key for about ten seconds, then the 700 Color Computer continues from the screen you were at before you performed the warm-boot.
PAGE 35
Chapter 1 — Introduction Software Build Version To check to see if your 700 Color Computer has the latest software build, select Start > Internet Explorer > the Intermec logo. The latest software build version is displayed beneath the Version Information title. Software Tools The following Intermec software tools are available as free downloads: SmartSystemst Foundation Console (www.intermec.
PAGE 36
Chapter 1 — Introduction Storage Media Note: MultiMediaCards (MMCs) are not supported. Storage Cards Available CompactFlash Cards On 700 Color Computers, the CompactFlash card slot accepts either a storage card or the 802.11b or 802.11b/g radio, which is factory-installed and cannot be removed. The 730 Computer does not support CompactFlash storage cards. Secure Digital Cards The Secure Digital card slot accepts storage cards only.
PAGE 37
Chapter 1 — Introduction Internal Card Slots Below is a view of the various card slots within your 700 Color Computer. Note that the 730 Computer only allows access to the Secure Digital and SIM card slots. S The CompactFlash card goes into the top card clot. S The Secure Digital card would go into the bottom left card slot. S The SIM card goes into the bottom right card slot.
PAGE 38
Chapter 1 — Introduction 3 Insert the storage card, with the contacts facing the keypad, into your 700 Color Computer to ensure that no adhesive is exposed once the tab is placed. Keypad facing down Vibrator Note: This information does not apply to the 730 Computer. If your 700 Color Computer is built with an imager or scanner and the vibrator is disabled, do the following instructions to enable the vibrator. If you are not able to enable the vibrator, then contact Customer Support.
PAGE 39
Chapter 1 — Introduction Wireless Network Support Radios are installed at the factory and cannot be installed by a user. The 700 Color Computer must be serviced to install or replace radios. Contact your Intermec representative for more information. See Chapter 4, “Network Support” for information about supported radios. Note: Changes or modifications not expressly approved by Intermec could void the user’s authority to operate the equipment.
PAGE 40
Chapter 1 — Introduction Display: 730 740, 741, 750, 751, 760, 761 Diagonal 89mm (3.5 in) 97mm (3.8 in) Colors 64 K 256 K Environmental: 730 740, 741, 750, 751, 760, 761 Operating Temperature -10° to 55°C (14° to 131°F) -20° to 60°C (-4° to 140°F) Storage Temperature -20° to 60°C (-4° to 140°F) -20° to 60°C (-4° to 140°F) Relative Humidity 5% to 95% noncondensing 5% to 95% noncondensing IP54 compliant IP64 compliant Drop Specifications 1.
PAGE 41
Chapter 1 — Introduction Operating System: 730 740, 741, 750, 751, 760, 761 X X 730 740, 741, 750, 751, 760, 761 Length 178 mm (7.0 in) 191 mm (7.53 in) Width 89 mm (3.5 in) 90 mm (3.5 in) Height 38 mm (1.5 in) 50 mm (1.97 in) Weight 420 g (15 oz) 483-568 g (17-20 oz) depending on options Power: 730 740, 741, 750, 751, 760, 761 AB10 Lithium-Ion (LiIon), 3.6V, (1 x 2400 mAh cells), customer-replaceable LiIon, 7.2V, (2 x 2000 mAh cells), customer-replaceable 8.64 Watt-hours 14.
PAGE 42
Chapter 1 — Introduction 24 700 Series Color Mobile Computer User’s Manual
PAGE 43
2 Windows Mobile 2003 This chapter introduces Microsoft Windows Mobile 2003 for Pocket PC. While using your 700 Color Computer, keep these key points in mind: S Tap Start on the navigation bar, located at the top of the screen, to quickly move to programs, files, and settings. Use the command bar at the bottom of the screen to perform tasks in programs. The command bar includes menus, icons, and the onscreen keyboard.
PAGE 44
Chapter 2 — Windows Mobile 2003 Software Builds Go to “Software Build Version” on page 17 to determine which Intermec build of Windows Mobile 2003 is on your unit. Where to Find Information This chapter describes your 700 Color Computer hardware, provides an overview of the programs on your 700 Color Computer, and explains how to connect your 700 Color Computer to a desktop, a network, or the Internet.
PAGE 45
Chapter 2 — Windows Mobile 2003 display it by tapping the Start flag (shown left) and then Today. On the Today screen, you can see important information for the day. Tap to start a program. Tap and hold to change time format. Tap to change date and time. Tap to change owner information. Your day at a glance. Tap to open the associated program. Tap to create a new item. To customize what is displayed on the Today screen, including the background image, tap Start > Settings > the Personal tab > Today.
PAGE 46
Chapter 2 — Windows Mobile 2003 Send and receive e-mail messages. Browse Web and WAP (Wireless Application Protocol) sites, and download new programs and files from the Internet. Create handwritten or typed notes, drawings, and recordings. Keep track of your tasks. Play digital audio and video files that are stored on your 700 Series Computer or on a network. Navigation Bar and Command Bar The navigation bar is located at the top of the screen.
PAGE 47
Chapter 2 — Windows Mobile 2003 Tap and hold to display the pop-up menu. Lift the stylus and tap the action you want. Tap outside the menu to close it without performing an action. Notifications When you have something to do, your device notifies you in a variety of ways. For example, if you have set up an appointment in Calendar, an email message arrives, or a friend sends you an instant message, you are notified in any of the following ways: S A message box appears on the screen.
PAGE 48
Chapter 2 — Windows Mobile 2003 Use the input panel to enter information in any program on your 700 Color Computer. You can either type using the onscreen keyboard or write using Block Recognizer, Letter Recognizer, or Transcriber. In either case, the characters appear as typed text on the screen. To show or hide the input panel, tap the Input Panel icon. Tap the arrow next to the Input Panel icon to see your choices. Select an input method. Tap to see your choices. Input Panel icon.
PAGE 49
Chapter 2 — Windows Mobile 2003 S To backspace one character, drag the stylus to the left across at least two keys. S To insert a carriage return, tap and hold the stylus anywhere on the keyboard and drag down. To use larger keys, tap the input panel arrow, tap Options, select “Keyboard” from the Input method drop-down list, then select Large keys. Using Block Recognizer Character recognition software gives you a fast and easy method for entering information in any program on your 700 Color Computer.
PAGE 50
Chapter 2 — Windows Mobile 2003 Using Letter Recognizer With Letter Recognizer, you can write letters using the stylus just as you would on paper. Tap the input panel arrow, then tap Letter Recognizer. Write a letter in the box. When you write a letter, it is converted to typed text that appears on the screen. For specific instructions on using Letter Recognizer, with Letter Recognizer open, tap the question mark next to the writing area. Tap for assistance.
PAGE 51
Chapter 2 — Windows Mobile 2003 Tap to use your stylus like a pen. Selecting the Writing If you want to edit or format writing, you must select it first. 1 Tap and hold the stylus next to the text you want to select until the insertion point appears. 2 Without lifting, drag the stylus across the text you want to select. If you accidentally write on the screen, tap Tools > Undo and try again. You can also select text by tapping the Pen icon to deselect it and then dragging the stylus across the screen.
PAGE 52
Chapter 2 — Windows Mobile 2003 Select the text you want to convert and tap Recognize on the pop-up menu. The writing is turned into text. Tap to disable the pen function. If the conversion is incorrect, you can choose different words from a list of alternates or return to the original writing. To do so, tap and hold the incorrect word (tap one word at a time). On the pop-up menu, tap Alternates.
PAGE 53
Chapter 2 — Windows Mobile 2003 S Write the letters of a word closely and leave big gaps between words so that the 700 Color Computer can easily tell where words begin and end. S Hyphenated words, foreign words that use special characters such as accents, and some punctuation cannot be converted. S If you add writing to a word to change it (such as changing a “3” to an “8”) after you attempt to recognize the word, the writing you add is not included if you attempt to recognize the writing again.
PAGE 54
Chapter 2 — Windows Mobile 2003 Recording a Message In any program where you can write or draw onscreen, you can also capture thoughts, reminders, and phone numbers by recording a message. In the Inbox program, you can add a recording to an e-mail message. In Calendar, Tasks, and Contacts, you can include a recording in the Notes tab. In the Notes program, you can create a stand-alone recording or add a recording to an open note.
PAGE 55
Chapter 2 — Windows Mobile 2003 S To edit a My Text message, tap Tools > Edit My Text Messages. Tap the message to edit and enter new text at the bottom of the screen. Tap to select a prewritten message. Finding and Organizing Information The Find feature helps you to quickly locate information. Tap Start > Find. Enter the text you want to find, select a data type, and then tap Go to initiate the search.
PAGE 56
Chapter 2 — Windows Mobile 2003 Customizing Your 700 Color Computer You can customize your 700 Color Computer by adjusting settings and installing additional software. Adjusting Settings You can adjust settings to suit the way you work. To see available options, tap Start > Settings > either the Personal tab or the System tab located at the bottom of the screen. You might want to adjust the following: Menus: To customize the Start menu, and to enable a pop-up menu from the New icon.
PAGE 57
Chapter 2 — Windows Mobile 2003 1 Determine your 700 Color Computer and processor type so that you know which version of the software to install. Tap Start > Settings > the System tab > About > the Version tab, then make a note of the information in Processor. 2 Download the program to your desktop (or insert the CD or disk that contains the program into your desktop). You may see a single *.XIP, *.EXE, or *.ZIP file, a SETUP.
PAGE 58
Chapter 2 — Windows Mobile 2003 Adding a Program Directly from the Internet 1 Determine your 700 Color Computer and processor type so that you know which version of the software to install. Tap Start > Settings > the System tab > About > the Version tab, then make a note of the information in Processor. See a sample on the previous page. 2 Download the program to your 700 Color Computer straight from the Internet using Pocket Internet Explorer. You may see a single *.XIP, *.EXE, or *.ZIP file, a SETUP.
PAGE 59
Chapter 2 — Windows Mobile 2003 Microsoft ActiveSync Visit the following Microsoft Web site for the latest in updates, technical information, and samples: www.microsoft.com/windowsmobile/resources/communities/default.mspx Using Microsoft ActiveSync, you can synchronize the information on the desktop with information on your 700 Color Computer. Synchronization compares the data on your 700 Color Computer with your desktop and updates both computers with the most recent information.
PAGE 60
Chapter 2 — Windows Mobile 2003 For information about using ActiveSync on your desktop, start ActiveSync on your desktop, and then see ActiveSync Help. View connection status. Tap to connect and synchronize. Tap to stop synchronization. View synchronization status. Tap to synchronize via IR or change synchronization settings. For more information about ActiveSync on your 700 Color Computer, switch to ActiveSync, then tap Start > Help.
PAGE 61
Chapter 2 — Windows Mobile 2003 If you use Outlook on your desktop, you can synchronize appointments between your device and desktop. Tap to go to Today Tap to display or edit the appointment details. Tap to create a new appointment Synchronizing Calendar Calendar items stored on your device can be synchronized with calendar items on your desktop or Microsoft Exchange Server.
PAGE 62
Chapter 2 — Windows Mobile 2003 Note: In Month View, the day of an appointment assigned to the Holiday category appears in red. This day was assigned the Holiday category. Tap to access the Month view What’s an All Day Event? An appointment can either be a normal appointment or an all day event, which lasts the full day or spans many days. Examples include a trade show, a vacation, or a seminar. You can also use all day events to schedule an annual event, such as a birthday or anniversary.
PAGE 63
Chapter 2 — Windows Mobile 2003 Note: You cannot modify or create all-day events with attendees on the device. If you create all day events with attendees on your desktop, use ActiveSync to copy such events to the device. Then, view them in Calendar. For more information on copying files, see ActiveSync Help. To use the device to schedule an appointment with attendees lasting all day, set type to “Normal,” then adjust the date and time appropriately. This describes the all day event.
PAGE 64
Chapter 2 — Windows Mobile 2003 Viewing Appointments You can view appointments in one of several views (Agenda, Day, Week, and Month). In Agenda view, upcoming appointments are displayed in bold. To see detailed appointment information in any view, tap the appointment. To see a list of available actions for an appointment, tap and hold the appointment. Tap Start > Today to quickly see your appointments for the day. This displays the appointment in bold.
PAGE 65
Chapter 2 — Windows Mobile 2003 Creating or Changing an Appointment To create an appointment, tap New. To select a new date from a pop-up calendar, tap the display date. To enter or select a new time, tap the display time. Enter the appointment details, and when finished, tap OK to return to the calendar. If you are working in Day view, tap the time slot for the new appointment and then tap New to have the time automatically entered for you. To change an appointment, tap it in the calendar, then tap Edit.
PAGE 66
Chapter 2 — Windows Mobile 2003 Creating an All Day Event To create an all day event, tap New, then tap All Day, then select Yes. Tap to select either Yes or No whether this is an all day event. Note: To change an all day event, switch to Day or Agenda view, tap the event listed at the top of the calendar, and then tap Edit. Change any appointment detail by tapping it and entering the new information. You cannot modify or create all day events with attendees.
PAGE 67
Chapter 2 — Windows Mobile 2003 3 To change how many minutes before the appointment you are reminded, tap the minutes displayed, then select the new minutes from a drop-down or enter the new minutes. Tap minutes to change hours, days, or weeks. Tap to select Remind me to enable the reminder feature.
PAGE 68
Chapter 2 — Windows Mobile 2003 2 Tap the Notes tab to enter notes. For specific instructions, tap Start > Help > Notes to see Notes Help. These are controls for the recorder. Use your stylus to write or draw your information here. Tap to activate the keyboard. Tap to activate the writing pad. Tap to activate the recorder. Note: To edit an existing note, tap the appointment in the calendar, tap Edit, then tap the Notes tab.
PAGE 69
Chapter 2 — Windows Mobile 2003 3 On the Select tab, select the categories to which you want to assign the appointment. 4 To create a new category, tap the Add/Delete tab, enter the category name, then tap Add. The new category is automatically selected in the Select tab. 5 Tap ok to return to the appointment. A check mark indicates a selected category. Note: To find an appointment assigned to a category, tap Tools > Categories and select the type of appointment that you want displayed.
PAGE 70
Chapter 2 — Windows Mobile 2003 4 Inbox automatically creates a meeting request and sends it to the attendees the next time you synchronize with your desktop. Textual notes entered in the Notes tab (excluding writing or recordings) are sent also. A check mark indicates a selected attendee. Note: If you are sending the meeting request through a connection to an ISP or the network, rather than through synchronization with your desktop, tap Tools > Options.
PAGE 71
Chapter 2 — Windows Mobile 2003 Deleting an Appointment In the calendar, tap and hold the appointment, then tap Delete Appointment. When you synchronize next, this is also deleted from the desktop. Changing Calendar Options In the calendar, tap Tools > Options. S To see appointment indicators, select icons to display in Show icons. You can display indicators for recurring appointments, appointments with notes, appointments with reminders, etc.
PAGE 72
Chapter 2 — Windows Mobile 2003 If you use Microsoft Outlook on your desktop, you can synchronize contacts between your 700 Color Computer and your desktop. Select the category of contacts you want displayed in the list. Tap and enter part of a name to quickly find it in the list. Tap to see additional phone numbers and e-mail addresses. Tap to display or edit the contact details. Tap and hold to display a pop-up menu of actions.
PAGE 73
Chapter 2 — Windows Mobile 2003 Synchronizing Contacts Contacts stored on your device can be synchronized with Outlook contacts stored on your desktop or with Mobile Information Server 2002 or later. New items entered in one location are copied to the other during synchronization. Handwritten notes and drawings are saved as pictures when synchronizing with a desktop, but removed when synchronizing with a server. For information on synchronization, see ActiveSync Help on the desktop.
PAGE 74
Chapter 2 — Windows Mobile 2003 Creating or Changing a Contact S To create a contact, tap New. To enter notes, tap the Notes tab. When finished, tap ok to return to the contact list. S To change a contact, tap it in the contact list, and then tap Edit. To cancel edits, tap Edit > Undo. When finished making changes, tap ok to return to the contact list. Note: If you enter a name with more than two words, the middle word is recorded as a middle name.
PAGE 75
Chapter 2 — Windows Mobile 2003 Note: To edit an existing note, tap the contact, tap Edit > the Notes tab. These are controls for the recorder. Use your stylus to write or draw your information here. Tap to activate the keyboard. Tap to activate the writing pad. Tap to activate the recorder. Assigning a Contact to a Category 1 In the contact list, tap the contact, and then tap Edit. 2 Scroll to and tap Categories. 3 On the Select tab, check the categories to assign to the contact.
PAGE 76
Chapter 2 — Windows Mobile 2003 Sending a Message to a Contact 1 In the contact list, tap and hold the contact. To select multiple contacts, tap and drag. Then, tap and hold the selected contacts. 2 On the pop-up menu, select Send Email or Send SMS, depending upon the type of message to send. Note: To send an e-mail message, you must have an e-mail address configured for the contact.
PAGE 77
Chapter 2 — Windows Mobile 2003 S From Contacts, start typing a contact name until you see it displayed on the screen. To show all contacts again, tap the text box at the top of the screen and clear the text, or tap the arrow to the right of the text box. S In the contact list, tap the category list (labeled All Contacts by default) and tap the category to which you have assigned a contact. To show all contacts again, select All Contacts.
PAGE 78
Chapter 2 — Windows Mobile 2003 S To increase the available space for displaying contacts in the list, clear Show ABC tabs. Clear this to view more contacts per screen. Tap this to view larger text. Enter the three-digit area code. Select from a drop-down list. Tasks: Keeping a To Do List To switch to Tasks on your 700 Color Computer, tap Start > Tasks. Use Tasks to keep track of what you have to do. A variety of task information can display on the Today screen.
PAGE 79
Chapter 2 — Windows Mobile 2003 Creating a Task S To quickly create a task, enter text in the Tap here to add a new task box at the top of the screen. If you do not see this box, tap Tools > Entry Bar. S To create a task with detailed information, such as start and due dates, tap New. To enter notes, tap the Notes tab. You can enter a start date and due date or enter other information by first tapping the field. If the input panel is open, you need to hide it to see all available fields.
PAGE 80
Chapter 2 — Windows Mobile 2003 Notes: Capturing Thoughts and Ideas To switch to Notes on your 700 Color Computer, tap Start > Notes. Notes helps you quickly capture your ideas, notes, and thoughts. You can create a note using written and typed text, drawings, and recordings. You can also share your notes with others through e-mail, infrared, and synchronization with your desktop. Tap to change the sort order of the list. Tap to open a note or play a recording.
PAGE 81
Chapter 2 — Windows Mobile 2003 Synchronizing Notes Notes can be synchronized between your desktop and device either through notes synchronization or file synchronization. Notes synchronization synchronizes the notes on your 700 Color Computer with Outlook Notes on your desktop. File synchronization synchronizes all notes on your 700 Color Computer with the My Documents folder for the 700 Color Computer on your desktop.
PAGE 82
Chapter 2 — Windows Mobile 2003 With synchronization, messages are synchronized between the device Inbox and the PC Inbox by using ActiveSync and Microsoft Exchange or Microsoft Outlook. For more information, see “Synchronizing E-mail Messages” below. When connecting to a POP3 or IMAP4 server, you use a modem to connect to your Internet service provider (ISP), or a modem or Ethernet card to connect to the local area network to which your e-mail server is connected.
PAGE 83
Chapter 2 — Windows Mobile 2003 move two messages from the Inbox folder to a folder named Family, and you have designated Family for synchronization, the server creates a copy of the Family folder and copies the messages into that folder. You can then read the messages while away from your desktop. S If you use SMS, messages are stored in the Inbox folder.
PAGE 84
Chapter 2 — Windows Mobile 2003 Setting Up or Changing an Account S To set up a POP3 or IMAP4 e-mail account, tap Accounts > New Account. Follow the instructions in the New Account Wizard. S To set up an SMS account, tap Accounts > Accounts, and then tap SMS. Follow the instructions on the screen. To change options for an account, tap Accounts > Accounts, then tap the name of the account, and follow the instructions on the screen.
PAGE 85
Chapter 2 — Windows Mobile 2003 2 To select an account, tap the From list and select “ActiveSync,” “SMS,” or the desired e-mail account. 3 Enter the e-mail address or SMS address of one or more recipients, separating them with semicolons. To access addresses and phone numbers from Contacts, tap To. 4 Enter your message. To quickly add common messages, tap My Text and tap a desired message. 5 To check spelling, tap Edit > Spell Check. 6 Tap Send.
PAGE 86
Chapter 2 — Windows Mobile 2003 Pocket Word Pocket Word works with Microsoft Word on your desktop to access copies of your documents. You can create new documents on your 700 Color Computer, or you can copy documents from your desktop to your 700 Color Computer. Synchronize documents between your desktop and your 700 Color Computer to have up-to-date content in both locations. Creating a Document Use Pocket Word to create documents, such as letters or meeting minutes.
PAGE 87
Chapter 2 — Windows Mobile 2003 You can insert the data in a document. First, make sure that no drawings are selected, tap and hold anywhere on the document, then tap Insert Date from the pop-up menu. Typing Mode Using the input panel, enter typed text into the document. For more information on entering typed text, see “Basic Skills” on page 26. To format existing text and to edit text, first select the text.
PAGE 88
Chapter 2 — Windows Mobile 2003 Writing Mode In writing mode, use your stylus to write directly on the screen. Ruled lines are displayed as a guide, and the zoom magnification is greater than in typing mode to allow you to write more easily. For more information on writing and selecting writing, see “Basic Skills” on page 26. With Space icon selected, drag to insert space. An arrow appears showing the space direction and size. Tap to highlight selected text. Pen icon. Space icon.
PAGE 89
Chapter 2 — Windows Mobile 2003 Resize an object by dragging the selection handles. Tap to select formatting options, such as line weight, fill color, and line color. Tap an arrow to see your choices. Pen icon. Synchronizing Pocket Word Documents Pocket Word documents can be synchronized with Word documents on your desktop. To synchronize files, first select the Files information type for synchronization in ActiveSync.
PAGE 90
Chapter 2 — Windows Mobile 2003 Creating a Workbook Use Pocket Excel to create workbooks, such as expense reports and mileage logs. To create a new file, tap Start > Programs > Pocket Excel > New. A blank workbook appears. Or, if you have selected a template for new workbooks in the Tools > Options dialog box, that template appears with appropriate text and formatting already provided. You can open only one workbook at a time; when you open a second workbook, save the first.
PAGE 91
Chapter 2 — Windows Mobile 2003 S Freeze panes on a worksheet. First select the cell where you want to freeze panes. Tap View > Freeze Panes. You might want to freeze the top and leftmost panes in a worksheet to keep row and column labels visible as you scroll through a sheet. Tap View > Unfreeze Panes to undo this process. S Split panes to view different areas of a large worksheet. Tap View > Split. Then drag the split bar to where you want it. To remove the split, tap View > Remove Split.
PAGE 92
Chapter 2 — Windows Mobile 2003 Setting Up an Account Before you can use MSN Messenger, you must set up the instant messaging accounts to use. For MSN Messenger Service, you must have a Microsoft Passport or Hotmail account. For Exchange Instant Messaging, you must have an Exchange account. 1 Create a connection for your device. To use MSN Messenger Service, set up a connection to the Internet; to use Exchange Instant Messaging, set up a connection to your corporate network.
PAGE 93
Chapter 2 — Windows Mobile 2003 Working with Contacts The MSN Messenger window shows all of your messenger contacts at a glance, divided into Online and Not Online categories. From this view, while connected, you can chat, send e-mail, block the contact from chatting with you, or delete contacts from your list using the pop-up menu. Tap a contact to start a chat. Tap and hold to display a pop-up menu of actions. To add a contact, tap Tools > Add a Contact and follow the directions on the screen.
PAGE 94
Chapter 2 — Windows Mobile 2003 S To see who has you listed as a contact, tap View. Sending a Message S Tap a contact to whom you want to send a message. Enter your message in the text entry area at the bottom of the screen and tap Send. To quickly add common messages, tap My Text and tap a desired message. S To invite another contact to an ongoing chat, tap Tools > Invite and tap a contact. S To see who is already chatting or to switch between chats, tap Chats. Enter a message. Tap to send message.
PAGE 95
Chapter 2 — Windows Mobile 2003 Use Microsoft Windows Media Player on your desktop to copy digital audio and video files to your 700 Color Computer. You can play Windows Media and MP3 files on your Windows Mobile. For information about using Windows Media Player for Windows Mobile, tap Start > Help > Windows Media Player. Progress of the current track. Tap to play or pause. Tap to adjust volume. Tap to stop. Tap to skip to the next song. Tap to play a previous song.
PAGE 96
Chapter 2 — Windows Mobile 2003 Using the Library The Library is your Reader home page with a list of the books stored on your 700 Color Computer or storage card. To open the Library: S On the Reader command bar, tap Library. S On a book page, tap the book title, then tap Library. S To open a book, tap its title in the Library list. Tap to scroll through the Library list. Tap to select a sort order. Tap to open a book. Tap here to navigate to other parts of the Reader.
PAGE 97
Chapter 2 — Windows Mobile 2003 Using Reader Features Reading a book electronically gives you several options not available with paper books. These options are available from any book page. Select text by dragging across the text on the page. Then, tap an option on the pop-up menu, as described here: Searching for Text Find text in a book by tapping Find on the pop-up menu. Enter the word you want to search for, and tap the desired Find option. Reader highlights found text on the page.
PAGE 98
Chapter 2 — Windows Mobile 2003 Mobile Favorites Folder Only items stored in the Mobile Favorites subfolder in the Favorites folder in Internet Explorer on your desktop are synchronized with your 700 Color Computer. This folder was created automatically when you installed ActiveSync. Favorite Links During synchronization, the list of favorite links in the Mobile Favorites folder on your desktop is synchronized with Pocket Internet Explorer on your 700 Color Computer.
PAGE 99
Chapter 2 — Windows Mobile 2003 7 To download the pages that are linked to the mobile favorite you just created, in Internet Explorer on the desktop, right-click the mobile favorite, then click Properties. On the Download tab, specify the number of links deep you want to download. To conserve 700 Color Computer memory, go only one level deep. 8 Connect your 700 Color Computer to your desktop.
PAGE 100
Chapter 2 — Windows Mobile 2003 Using Pocket Internet Explorer You can use Pocket Internet Explorer to browse mobile favorites and channels that were downloaded to your 700 Color Computer without connecting to the Internet. You can also connect to the Internet through an ISP or a network connection and browse the Web. Favorites icon Home icon Refresh icon Viewing Mobile Favorites and Channels 1 Tap the Favorites icon to display your list of favorites. 2 Tap the page you want to view.
PAGE 101
Chapter 2 — Windows Mobile 2003 Browsing the Internet 1 Set up a connection to your ISP or corporate network. 2 To connect and start browsing, do one of the following: S Tap the Favorites icon, and then tap the favorite you want to view. S Tap View > Address Bar. In the address bar that appears at the top of the screen, enter the Web address you want to visit and then tap Go. Tap the arrow to choose from previously entered addresses.
PAGE 102
Chapter 2 — Windows Mobile 2003 84 700 Series Color Mobile Computer User’s Manual
PAGE 103
3 Installing Applications There are multiple ways to get an application to your 700 Series Color Mobile Computer; just as there are multiple ways to package the application for delivery. Note: “700 Color” pertains to 730, 740, 741, 750, 751, 760, and 761 Computers unless otherwise noted.
PAGE 104
Chapter 3 — Installing Applications Packaging an Application Use any of these methods to package an application for installation: S For very simple applications, the application itself might be the only file that needs to be delivered. S It could be a directory structure that contains the application, supporting files like ActiveX controls, DLLs, images, sound files, and data files. S Or, you could package an application via a CAB file.
PAGE 105
Chapter 3 — Installing Applications Installing Applications Consider any of these options to get the package to the preferred location: S Microsoft ActiveSync (next page) S Storage cards (page 88) S FTP Server (page 88) S Registry (page 88) Using Microsoft ActiveSync Note: These instructions assume the 700 Color Management Tools were installed on your desktop. The Microsoft ActiveSync tool is located on the 700 Color Companion CD.
PAGE 106
Chapter 3 — Installing Applications 5 Within the Mobile Device directory, go to the directory where you want the files located on the 700 Color Computer, do a right-click for a pop-up menu, then select Paste. 6 When all of the files are pasted, perform a warm-boot on the 700 Color Computer. When the computer reboots, wait for the LED on the top left of your keypad to stop blinking.
PAGE 107
Chapter 3 — Installing Applications When you change the IP address using the Intermec Settings applet, the information is lost when you perform a warm-boot, and the original IP address is used. You must load the REGFLUSH.CAB file before running the Registry Save application. Once you do, perform a warm-boot to keep the IP address. To install the Registry Save application after a cold-boot is performed, change the properties of the REGFLUSH.CAB file to that of read-only.
PAGE 108
Chapter 3 — Installing Applications Loading the Registry Save Application 1 On the 700 Color Computer, double-click the REGFLUSH.CAB file to load the “Registry Save” application. 2 Set up the 700 Color Computer to your specifications using the Intermec Settings and other applets. 3 Select Start > Settings > the System tab > the Utilities icon > the Registry Save tab, then check both Enable Registry Storage and Enable RTC Restore . Tap ok to close, then close Settings.
PAGE 109
Chapter 3 — Installing Applications 2 The new registry file should be on the root of the Flash File Store folder with today’s date. Updating Other Computers in Your Network These instructions assume you have Windows XP on your desktop. 1 Connect your 700 Color Computer to your desktop using Microsoft ActiveSync and a cradle. Make sure the ActiveSync application on your desktop is up and running and connected to your 700 Color Computer.
PAGE 110
Chapter 3 — Installing Applications Updating the System Software When you upgrade your 700 Color Computer, you are updating the operating system (OS) and the Persistent Storage Manager (PSM) files. The PSM files are stored in the Flash File Store region, and deliver Intermec value-added functionality such as data collection, unit configuration and diagnostics, the Intermec wireless security suite, and the SmartSystemst Foundation.
PAGE 111
Chapter 3 — Installing Applications Using a Storage Card to Upgrade the 700 Color Computer To use a Secure Digital card to upgrade the 700 Color Computer, you need a Secure Digital card reader and a Secure Digital card formatted as FAT. Note: The 700 Color Computer currently supports Delkin Secure Digital cards only. Intermec cannot guarantee that other Secure Digital cards will work with the 700 Color Computer.
PAGE 112
Chapter 3 — Installing Applications 7 When the 700 Color Computer finishes booting, insert the AB10 battery, then close the battery door. You may use the 700 Color Computer. You have reset the 700 Color Computer to its default configuration. You need to set the date and time and to set its network communications parameters to reestablish communications with the other devices in the wireless network.
PAGE 113
Chapter 3 — Installing Applications Migrating from a 700 Monochrome Computer As you migrate from a 700 Monochrome Computer to a 700 Color Computer, you need to consider the following: When converting a 700 Monochrome Computer application to run on the 700 Color Computer, most APIs should work without changes. Below are a few exceptions: S The 700 Monochrome Computer uses the “\Storage Card” folder for nonvolatile storage.
PAGE 114
Chapter 3 — Installing Applications 96 700 Series Color Mobile Computer User’s Manual
PAGE 115
4 Network Support This chapter includes information about the different networks supported by the 700 Series Color Mobile Computer, and ways to configure and manage those networks. Note that the 700 Color automatically installs the appropriate software for radio or phone use when the unit is turned on. Note: “700 Color” pertains to 730, 740, 741, 750, 751, 760, 761, and 761B Computers unless otherwise noted.
PAGE 116
Chapter 4 — Network Support Understanding Your 700 Color Computer Due to the number of 700 Color Computers now available, and to the number of applications, drivers, and modules that may or may not be available, use these tables to determine what is on your computer. Hardware Features 730 Computers 802.11b radio, Bluetooth 740 Computers Ethernet, Bluetooth 741 Computers Ethernet, Bluetooth 750 Computers Ethernet, 802.11b radios, Bluetooth 751 Computers Ethernet, 802.
PAGE 117
Chapter 4 — Network Support S Blue (760/761 Computers) GSM/GPRS International (MC45 WAN radios) S No Color (761 Computers) CDMA and GSM/GPRS US/Canada (MC46 WAN radios) S Radome (761B Computers) GPRS EDGE only (MC75 radios) Personal Area Networks “Bluetooth” is the name given to a technology standard using short-range radio links, intended to replace cables connecting portable and fixed electronic devices.
PAGE 118
Chapter 4 — Network Support About the Application Bluetooth is not started automatically by default after a cold-boot is performed. To run Bluetooth, tap Start > Settings > the Connections tab > the Bluetooth icon. The 700 Color Computer retains the Bluetooth state when warm-boots are performed, for example: S If Bluetooth is active, and a warm-boot was performed, the 700 Color Computer boots up with the Bluetooth state activated and Bluetooth virtual COM ports (such as printing) registered.
PAGE 119
Chapter 4 — Network Support Properties Select a COM Port from the Choose COM Port box to register for this device, then check Enable Wireless Printing to complete the COM port registration. To change your COM port selection, clear (uncheck) the Enable Wireless Printing box, select a new COM port, then check Enable Wireless Printing again. Choose COM Port items already in use are grayed out. When you enable Wireless Printing, a status message is shown near the bottom of the screen to confirm your action.
PAGE 120
Chapter 4 — Network Support File Transfer Use this page to enable your unit to receive files from another Bluetooth device, or from any device that supports this function. This does not apply to the 730 Computer. From this point, this transfer is similar to an IrDA file transfer. Tap Start > Programs > File Explorer, tap to hold the file to transfer, then select Beam File from its pop-up menu. The system searches for a list of Bluetooth devices that will accept a connection from your unit.
PAGE 121
Chapter 4 — Network Support Connecting with Bluetooth Note: While these instructions apply to many Bluetooth devices, these instructions use the Nokia 3650 for example purposes. Before you connect to the network, make sure Bluetooth is enabled on your 700 Color Computer before discovering and connecting to remote devices. Tap Start > Settings > the Connections tab > the Bluetooth icon. Tap On to activate Bluetooth, then tap ok to exit the applet. Also make sure Bluetooth is enabled on your mobile phone.
PAGE 122
Chapter 4 — Network Support 2 Enter a name for the connection, such as “Nokia.” In the Select a modem list, select “Bluetooth,” then tap Next to continue. 3 Tap New... if the phone is not listed in the known devices. Make sure your Bluetooth device is turned on before you start the search.
PAGE 123
Chapter 4 — Network Support 4 When the discovery of devices is complete, select your Bluetooth device, then tap Next to continue. 5 Enter the correct Device PIN on both the Bluetooth device and the 700 Color Computer, then tap Next to continue.
PAGE 124
Chapter 4 — Network Support 6 Enter a name for the device if needed, then tap Finish. 7 After bonding completes, select your Bluetooth device from the list of bonded devices, then tap Next.
PAGE 125
Chapter 4 — Network Support 8 Enter the appropriate number as it should be dialed for your Bluetooth connection, then tap Next to continue. Enter the user name, password, and domain required for your Bluetooth device, then tap Finish. Now you can establish a connection to your network via the Internet Explorer application. To disconnect, tap the Connectivity icon in the top menu bar, then select Disconnect.
PAGE 126
Chapter 4 — Network Support Configuring 802.11 Radio Communications Caution: Make sure all components with antennas are at least 30 cm (1 ft) apart when power is applied. Failure to comply could result in equipment damage. The wireless 700 Color Computer has an internal 802.11b or 802.11b/g radio to transfer data using wireless communications. This manual assumes you already have set up your wireless communications network, including your access points.
PAGE 127
Chapter 4 — Network Support With the NDISTRAY pop-up menu (the Network Driver Interface Specification tray application) from the System Tray, you can specify “802.11,” “Ethernet,” or “No Networking” to load onto your 700 Color Computer when a cold-boot is performed. When a warm boot is performed, the 700 Color Computer loads the network set just prior to the warm boot. The 730 Computer only has the 802.11b radio and Bluetooth. It does not have an external antenna. Other radios are not supported.
PAGE 128
Chapter 4 — Network Support Wireless 802.11 Communications When “Wireless 802.11” is selected via the NDISTRAY pop-up menu, the Wireless 802.11 antenna icon shown to the left appears in the system tray as circled in the following illustration. No Networking When “No networking” is selected from the NDISTRAY pop-up menu, the disconnected icon shown to the left appears in the system tray as circled in the following illustration.
PAGE 129
Chapter 4 — Network Support Network Connections From the 700 Color Computer, tap Start > Settings > the Connections tab > the Connections icon > the Advanced tab > Network Card or the Network Adapters tab to access the network connections for this unit. Make the changes necessary for your network, then tap ok when finished. Creating a Wireless Network Connection Use the Wireless Network applet for more security choices and better roaming behavior. See Appendix A for information.
PAGE 130
Chapter 4 — Network Support 2 Tap the Advanced tab > Network Card > the Wireless tab > Add New . 3 Tap the General tab, then enter a network name. If the network was detected, the network name is entered and cannot be changed. From Connects to, select to what your network is to connect. If you select “Work,” you can do a vpn connection or use proxy servers. If you select “The Internet,” you can connect directly to the internet.
PAGE 131
Chapter 4 — Network Support b Set Data Encryption to “Disabled.” To Enable WEP Encryption a Set Authentication to either “Open” if WEP keys are not required; or “Shared” when WEP keys are required for association. b Set Data Encryption to “WEP.” c To change the network key, clear The Key is provided for me automatically box, then enter the new Network key and select the appropriate Key index.
PAGE 132
Chapter 4 — Network Support To Enable WPA Authentication (730, 751, 751, 761 Computers) a Set Authentication to “WPA” (see page 236). b Set Data Encryption to either “WEP” or “TKIP” (see page 236). To Enable WPA Authentication Using a Preshared Key (730, 741, 751, 761 Computers) a Set Authentication to “WPA-PSK” (see page 236). b Set Data Encryption to either “WEP” or “TKIP” (see page 236). c Enter the new Network key.
PAGE 133
Chapter 4 — Network Support 5 Tap the 802.1x tab, select either “PEAP” or “Smart Card or Certificate” for the EAP type, then tap Properties to adjust its settings. 6 Tap ok to return to the Configure Wireless Network screen. 7 From the Networks to access drop-down list, select “All Available,” “Only access points,” or “Only computer-to-computer” depending on the type of networks to which you connect.
PAGE 134
Chapter 4 — Network Support AutoIP/DHCP Automatic Private IP Addressing (AutoIP) is enabled by default in Windows Mobile 2003. To remain compatible with other versions of Pocket PC, this setting needs to be enabled. You can configure the registry settings in the following to set the required AutoIP/DHCP behavior: S For Ethernet: HKEY_LOCAL_MACHINE\Comm\LAN9001\TcpIp S Fot 802.11: HKEY_LOCAL_MACHINE\Comm\NETWLAN1\TcpIp Other registry keys that can modify the behavior of AutoIP are as follows.
PAGE 135
Chapter 4 — Network Support Microsoft Phone Application (761 Computers with CDMA Radios) With the WAN radio module installed in your 761 Computer, you can send and receive telephone calls. Use the speaker on the back of the computer as your earpiece and use the connector on the bottom of the computer for your mouthpiece. Data Provisioning (Sprint) Note: If you wish to do this activation another time, tap Cancel to close this wizard, then tap Yes.
PAGE 136
Chapter 4 — Network Support 4 Enter your 6-digit activation code, then tap Next to continue. 5 Enter the phone number and MSID from Sprint, tap Next to continue. 6 The application prompts whether the information entered is correct. If so, tap Yes to continue, else tap No to return to the previous screen.
PAGE 137
Chapter 4 — Network Support 7 Note that voice service is available immediately. Data service take a minimum of four hours of activation before you can use the service. If after four hours, a data connection is not established, see “Data Provisioning” on page 117 to manually launch data provisioning. The application acknowledges that your phone will be in service in four hours. Tap Finish to close the wizard.
PAGE 138
Chapter 4 — Network Support 3 Tap Auto to initiate the activation. 4 The application acknowledges that your phone is now in service. Tap Finish to close the wizard. Phone Application Note: Wait at least four hours after Sprint activation is complete before using this application. Data provisioning should occur automatically. Network information about your 761 Computer needs to propagate through the Sprint Network after the activation is complete.
PAGE 139
Chapter 4 — Network Support Tap the appropriate keys to enter a telephone number, then tap Talk to dial the number. Tap End to “hang up” the phone. Tap this to backspace one digit. Tap this to dial the phone number shown above the keypad. Tap this to select a previously dialed number. Tap this to view your previous calls. Tap this to “hang up” your current call. Tap this toggle the mute option. Tap this to access the Contacts application. Tap this to access the Notes application.
PAGE 140
Chapter 4 — Network Support Call History Tap Call History to note the telephone numbers that were previously dialed from this 761 Computer. Tools Use the Tools menu to send a voice mail, access the Activation Wizard, send an SMS email message, or configure phone settings. S Tap Tools > Voice Mail to call and leave a voice message. S Tap Tools > Activation Wizard to access the wizard with which to activate your 761 Computer. Be sure to have an activation code, a phone number, and MSID information ready.
PAGE 141
Chapter 4 — Network Support S Tap Tools > Send SMS tab to access the Inbox application and send an SMS (Short Messaging Service) message. Be sure to have an SMS number ready to send the message — this is usually the mobile phone number. See Chapter 2, “Windows Mobile 2003,” for Inbox information. Phone Settings Either select Tools > Options from the Phone application or select Start > Settings > the Personal tab > the Phone icon to access the applet.
PAGE 142
Chapter 4 — Network Support S Tap the Location tab to toggle between your location being visible for everyone to detect and hiding your location from everyone except 911. Sprint Networks Verizon Networks S Tap the Data tab to either reset your connection settings for PCS Vision or update your PCS Vision profile. For Sprint Networks, if your 761 Computer is unable to make a data connection and it has been more than four hours since activation, you can launch data provisioning from this screen.
PAGE 143
Chapter 4 — Network Support S Tap the System tab to select the applicable function. Sprint Networks Verizon Networks S Tap the Phone Info tab to view the phone settings. Sprint Networks Verizon Networks Microsoft Phone Application (761 Computers with GSM Radios) With the WAN radio module installed in your 761 Computer, you can send and receive telephone calls. Use the speaker on the back of the computer as your earpiece and use the connector on the bottom of the computer for your mouthpiece.
PAGE 144
Chapter 4 — Network Support Activation The GSM phone is activated via a SIM card that you can purchase from your network provider. Phone Application Tap the appropriate keys to enter a telephone number, then tap Talk to dial the number. Tap this to backspace one digit. Tap this to view your previous calls. Tap this to select a previously dialed number. Tap this to dial the phone number shown above the keypad. Tap this toggle the mute option. Tap this to access the Contacts application.
PAGE 145
Chapter 4 — Network Support Speed Dial Tap Speed Dial to select a telephone number with which the 761 Computer is to dial automatically. To add to this list, use the Contacts application. See Chapter 2, “Windows Mobile 2003,” for more information about the Contacts application. Tools Tap Tools > Send SMS tab to access the Inbox application and send an SMS (Short Messaging Service) message. Be sure to have an SMS number ready to send the message — this is usually the mobile phone number.
PAGE 146
Chapter 4 — Network Support Phone Settings Either select Tools > Options from the Phone application or select Start > Settings > the Personal tab > the Phone icon to access the applet. S Tap the Phone tab to customize your phone settings such as the ring type and ring tone to use for incoming calls, and the keypad tone to use when entering phone numbers. Tap Other Settings to go to the Sounds & Notifications applet. S Tap the Services tab to access settings for any of the provided services.
PAGE 147
Chapter 4 — Network Support Tap any of the settings, then tap Get Settings. Make your changes, then tap ok to return to the Settings screen. Below is a sample Settings screen. S Tap the Network tab to find, set, or select the type of network on which this phone is to communicate.
PAGE 148
Chapter 4 — Network Support Phone Information To learn the latest phone settings, including the manufacturer, model, firmware rev, and IMEI, select Start > Settings > the System tab, then tap the WAN Info desktop icon. Tap ok when finished. SB555 Watcher (760 Computers with CDMA Radios) The SB555 Watcher program is used on the 760 Computer with CDMA radios only. Use this primarily to activate the WAN radio. Once the WAN radio is activated, you can remove the SB555 Watcher program from the 760 Computer.
PAGE 149
Chapter 4 — Network Support Copying CDMA Radio Module CAB Files from Intermec Web Site Copy CAB files from the Intermec web site at www.intermec.com onto your desktop. Intermec recommends one of two methods with which to load these CAB files onto your 760 Computer: S via the Microsoft ActiveSync application S via a CompactFlash or Secure Digital storage card. See Chapter 3, “Installing Applications,” for information about these methods.
PAGE 150
Chapter 4 — Network Support 5 Install the CompactFlash or Secure Digital memory card into the card slot in your 760 Computer. Note that if you do not want the CAB files erased after installation, set the CAB file attributes to “read-only” after copying them to the storage card. 6 Tap Start > Programs > the File Explorer icon on the 760 Computer. 7 Tap the pull-down menu for My Documents and tap the My Device root location. 8 If you are using a CompactFlash storage card, tap Storage Card.
PAGE 151
Chapter 4 — Network Support Activation Note: Set the date and time before doing this activation. SB555 Watcher is for activation and data provisioning. Once you enable voice capability, data capability, or both depending on the carrier, remove this program from the system by cold-booting your computer. Do not use the SB555 Watcher to make data/voice calls on a daily basis: S The SB555 Watcher application is a third-party application unaware of certain power management methods used in your 760 Computer.
PAGE 152
Chapter 4 — Network Support ESN of the modem Lock/Activation Code (may be termed one of the following): S MSL — Master Subsidy Lock S OTSL — OneTime Subsidy Lock S SPC — Service Provisioning Code S OTKSL — One Time Key Subsidy Lock SID (System ID) NID (Network ID) User Name Password MIN MSD MDN Note: The activation process for your Watcher version may vary from the following steps. Thus, you may not have to do all of them.
PAGE 153
Chapter 4 — Network Support 4 When you reach the Activation screen, select Manual Activation. 5 At the appropriate screen, enter the Activation Code (OTSL, MSL, OTKSL, or SPC) provided by your carrier and tap Next. 6 Enter the phone number provided when your 760 Computer was activated and tap Next. Verizon Automated Activation Process Note: This process takes approximately 60 seconds. Do the following to activate Verizon on your 760 Computer: 1 Tap Start > Programs > the Watcher icon.
PAGE 154
Chapter 4 — Network Support 2 Tap Yes, I accept to accept the license agreement, tap OK to continue. Note this license agreement does not appear again after this installation. 3 Select OK to initiate the warm-boot, then after the warm-boot, start the Watcher program again, select Automated Activation, then click Next. Note: You must be in the Verizon coverage area to activate your 760 Computer and only in the location of intended use.
PAGE 155
Chapter 4 — Network Support 9 Perform a cold-boot on your 760 Computer to uninstall the Watcher application, which is intended for activation purposes only. Use the following for establishing and maintaining connection to the WAN radio: S Custom application using Intermec WWAN Toolkit API S Custom customer application using Connection Manager Interface Note: When connecting to the WAN radio via Pocket PC Connection Manager, use the 10-digit phone number@vzw3g.
PAGE 156
Chapter 4 — Network Support 2 Perform a cold-boot on your 760 Computer, then go through the normal Pocket PC set-up (i.e. Align Screen etc.). 3 Important! Set the Date and Time. 4 Tap the Sprint_Watcher_PPC_2002-03xxx.CAB file to perform the installation. 5 Perform a warm-boot on your 760 Computer to load the CAB file. 6 From the Today screen, tap the LAN Network icon in the System Tray.
PAGE 157
Chapter 4 — Network Support Using Sprint Watcher Before you start using the Sprint Watcher application, make sure you match the correct ESN with each 760 Computer and that you have at least 80% CDMA signal strength. The ESN that you give to your provider is either on the box or on a label inside the battery compartment. The label would include the “ESN” term and a bar code along with the serial number.
PAGE 158
Chapter 4 — Network Support 3 Enter the MSL or lock code received from Sprint. 4 Enter the phone number (MIN) and MSID received from Sprint. These numbers may be the same. 5 After entering the phone number and MSID, the modem then resets and the Watcher application displays the screens shown here: Note: If the “searching for SB555” screen does not proceed to the next screen after 30-40 seconds, perform a warm-boot on your 760 Computer, then restart the Watcher program.
PAGE 159
Chapter 4 — Network Support Data Provisioning At this point, the activation on the Sprint network is complete. It is recommended by Sprint to wait before you launch data provisioning to allow time for the activation to propagate through your Sprint network. Before you manually launch data provisioning, wait at least 30 minutes. In some cases, you may have to wait up to two hours. 1 If Data Provisioning does not start automatically, select Admin > Data Provisioning from the bottom menu bar.
PAGE 160
Chapter 4 — Network Support S If after several attempts to complete the Data Provisioning over the air, it may be necessary to manually enter the data activation method. S Go to Intermec Knowledge Central www.intermec.com, then select Service & Support > Knowledge Central) to learn about manual activation. The article (number 5749) is titled How to Manually Activate a Sprint CDMA WAN Radio in the 760 Device.
PAGE 161
Chapter 4 — Network Support 6 Select Start > Internet Explorer, then tap Pocket Internet Explorer to choose a web site. Your unit is now successfully activated. Perform a cold-boot on your 760 Computer to uninstall the Watcher application. Watcher is intended for activation purposes only.
PAGE 162
Chapter 4 — Network Support Note: You need the Adobe Acrobat Reader application to view a PDF document. Go to www.adobe.com/prodindex/acrobat/readstep.html to install or download the latest Adobe Acrobat Reader. Command Set for Sierra Wireless SB555 Use the AT command interface from Sierra Wireless to program the CDMA/1xRTT SB555 radio module. Documentation for this interface is available via the following URL. Click the “General AT command reference” link for a PDF document, which is 680 KB in size.
PAGE 163
Chapter 4 — Network Support 2 Enter a name for the connection, select the appropriate modem (as listed here) from the Select a modem drop-down list, then tap Next to continue. S 760 Computers “WANA on COM4” S 761 Computers “WANB on COM5” S 761B Computers “Virtual WANB” 3 Enter a phone number as it should be dialed, then tap Next to continue. Select Start > Help for more information or tap use dialing rules to make modifications. Note that this screen may vary based on dialing rules.
PAGE 164
Chapter 4 — Network Support 4 Tap Advanced to adjust the baud rate. 5 Select the appropriate baud rate (as listed here) from the Baud rate drop-down list.
PAGE 165
Chapter 4 — Network Support 6 Tap the Port Settings tab, check Enter dialing commands manually, tap ok, then tap Finish to return to the Connections screen. 7 Tap Manage existing connections from the Connections page, press and hold the new connection for a pop-up menu, then tap Connect to initiate the connection. 8 Wait about ten seconds for the Network Log On screen, then tap OK. You do not need to enter information within the Network Log On screen.
PAGE 166
Chapter 4 — Network Support Remote Access (Modems) You can set up connections to the Internet and corporate network at work to do such activities as browsing the Internet or intranet, sending and receiving e-mail and instant messages, and synchronizing information using ActiveSync. Connections can be made using a wireless network. Your 700 Series Computer has two groups of connection settings: My ISP and My Work Network. Use My ISP settings to connect to the Internet.
PAGE 167
Chapter 4 — Network Support 2 Enter a name for the connection, such as “ISP Connection.” If using an external modem with a cable, select “Hayes Compatible on COM1” from the Select a modem list. Tap Next to continue. 3 Enter the access phone number, then tap Next.
PAGE 168
Chapter 4 — Network Support 4 Enter the user name, password, and domain (if provided by an ISP or your network administrator), then tap Finish. 5 Tap the Advanced tab from the Connections screen, then tap Select Location to specify your current location. These settings apply to all connections. Tap Use dialing rules, tap OK,then tap Edit to continue.
PAGE 169
Chapter 4 — Network Support 6 Specify your current phone type. If your phone type is pulse dialing, check the Pulse dialing box. If your type is tone dialing (as most phone lines are), then clear the Pulse dialing box. Continue to tap ok to close each page and return to the Settings page. To start the connection, use one of the following programs: S Send and receive e-mail messages by using Inbox. Before you can use Inbox, you need to provide the information it needs to communicate with the e-mail server.
PAGE 170
Chapter 4 — Network Support 1 Tap Start > Settings > the Connections tab > the Connections icon. In My ISP, tap Add a new modem connection. 2 Enter a name for the connection, such as “Company Connection.” In the Select a modem list, select your modem type, then tap Next to continue. If your modem type does not appear, try reinserting your 700 Color Computer into your modem dock. S If using an external modem connected to your 700 Computer with a cable, select “Hayes Compatible on COM1.
PAGE 171
Chapter 4 — Network Support 3 Enter the access phone number, using some of the following guidelines. If you know part of the phone number changes frequently as you travel, create dialing rules to avoid creating numerous modem connections for the same phone number. For more information, tap Use Dialing Rules. S Enter the phone number exactly as you want it dialed. For example, if you call from a business complex or hotel that requires a nine before dialing out, enter “9” in front of the phone number.
PAGE 172
Chapter 4 — Network Support 4 If necessary, enter the user name, password, and domain (provided by an ISP or network administrator). If a domain name was not provided, try the connection without entering a domain name, then tap Finish. Creating a VPN Server Connection to Work A VPN connection connects securely to servers via the Internet. Ask your network administrator for the user name, password, domain name, TCP/IP settings, and host name or IP address of the VPN server.
PAGE 173
Chapter 4 — Network Support 2 In Name, enter a name for the connection, such as a company’s name. In Host name/ IP, enter the VPN server name or IP address. Next to VPN type, select the type of authentication to use with your device: “IPSec/L2TP” or “PPTP.” If you are not sure which option to choose, ask your network administrator. Tap Next to continue. 3 Select the type of authentication. If you select A pre-shared key, enter the key provided by your network administrator.
PAGE 174
Chapter 4 — Network Support 4 Enter your user name, password, and domain name as provided by your ISP or network administrator. If a domain name was not provided, try the connection without entering a domain name. 5 You should not need to change any Advanced settings. Instances where to change advanced settings include the server to which you are connecting does not use dynamically-assigned addresses, and you need to enter your TCP/IP settings; or to change server DNS or WINS settings.
PAGE 175
Chapter 4 — Network Support the settings you can configure with the Intermec Settings applet is in the Intermec Computer Command Reference Manual (P/N: 073529) available online at www.intermec.com. Information about the SmartSystems Foundation is available as an online help within the SmartSystems Console application. Select SmartSystems > Help in the console to access the manual. See the Data Collection Resource Kit in the IDL for information about data collection functions.
PAGE 176
Chapter 4 — Network Support You will find the following MIB files either in the 700 Color Management Tools or on the web via www.intermec.com: S INTERMEC.MIB Defines the root of the Intermec MIB tree. S ITCADC.MIB Defines objects for Automated Data Collection (ADC), such as bar code symbologies. S ITCSNMP.MIB Defines objects for Intermec SNMP parameters and security methods, such as an SNMP security IP address. S ITCTERMINAL.MIB Defines objects for 700 Color parameters, such as key clicks.
PAGE 177
Chapter 4 — Network Support Configuring with SNMP The community string allows an SNMP manager to manage the 700 Color Computer with a specified privilege level. The default read-only community string is “public” and “private” is the default read/write community string. See the specific configuration parameter to find its OID. To configure using SNMP, configure 700 Color Computers for RF or Ethernet communications. Determine the OID (Object Identifier) for the parameter to be changed.
PAGE 178
Chapter 4 — Network Support 160 700 Series Color Mobile Computer User’s Manual
PAGE 179
5 Printer Support The 700 Series Color Mobile Computer works with the following printers from Intermec. Contact an Intermec representative for information about these printers. S 6808 A 4-inch belt-mount printer. S 6820 A full-page, 80-column printer. S 782T A 2-inch workboard printer. S PB20 A 2-inch belt-mount printer with a Bluetooth compatible module from Socket Communications. S PB42 A 4-inch wireless portable receipt printer with a Bluetooth compatible module from Socket Communications.
PAGE 180
Chapter 5 — Printer Support Printing ASCII These methods for printing using Pocket PC at this time is as follows: S Add port drivers to print ASCII directly to the port. S Use LinePrinter ActiveX Control from the Printing Resource Kit via the Intermec Developer Library (IDL) available as a download from the Intermec webs site at www.intermec.com/idl. Contact your Intermec representative for more information. S Via wireless printing - see the Bluetooth Resource Kit User’s Guide for more information.
PAGE 181
Chapter 5 — Printer Support NPCP Printer Driver The NPCP printer communications driver (NPCPPORT.DLL) is a Stream Device Driver built into the operating system. The driver supports only NPCP communications to and from the 6820 and 4820 printers over a selected serial port. All applications use WIN32 API functions to access drivers. Applications easily implement basic operations through the CreateFile(), WriteFile(), ReadFile(), DeviceIOControl(), and CloseHandle() Win32 APIs.
PAGE 182
Chapter 5 — Printer Support Opening the NPCP Driver The application opens the NPCP driver by using the CreateFile() function. The call can be implemented as follows. The first parameter “LPT9:” must reflect the device name and index used in the RegisterDevice() function call and will fail for any of the following reasons: hFile = CreateFile(_T(”LPT9:”), GENERIC_WRITE | GENERIC_READ, 0, NULL, OPEN_ALWAYS, FILE_ATTRIBUTE_NORMAL, NULL); S The port associated with the device during RegisterDevice() is in use.
PAGE 183
Chapter 5 — Printer Support #define IOCTL_NPCP_CANCEL CTL_CODE(FILE_DEVICE_SERIAL_PORT,0x400,METHOD_BUFFERED,FILE_ANY_ACCESS) #define IOCTL_NPCP_BIND CTL_CODE(FILE_DEVICE_SERIAL_PORT,0x401,METHOD_BUFFERED,FILE_ANY_ACCESS) #define IOCTL_NPCP_CLOSE CTL_CODE(FILE_DEVICE_SERIAL_PORT,0x402,METHOD_BUFFERED,FILE_ANY_ACCESS) #define IOCTL_NPCP_ERROR CTL_CODE(FILE_DEVICE_SERIAL_PORT,0x403,METHOD_BUFFERED,FILE_ANY_ACCESS) #define IOCTL_NPCP_FLUSH CTL_CODE(FILE_DEVICE_SERIAL_PORT,0x404,METHOD_BUFFERED,FILE_ANY_ACCESS
PAGE 184
Chapter 5 — Printer Support 3 Use IOCTL_NPCP_FLUSH to poll the printer to free up printer buffer resources. Use IOCTL_NPCP_FLUSH to poll the printer’s status. If an error is reported by the IOCTL, then use IOCTL_NPCP_ERROR to get the error and determine the correct recovery procedure. 4 Use WriteFile(); to write data to the printer. Check for errors and that all data were written. Use IOCTL_NPCP_ERROR to get the extended error.
PAGE 185
Chapter 5 — Printer Support O’Neil Printer Driver The DTR printer communications driver is a Stream Device Driver named ONEIL.DLL. All applications use WIN32 API functions to access drivers. Applications easily implement basic operations using the CreateFile(), WriteFile(), DeviceIOControl() and CloseHandle() Win32 APIs. The driver supports communications to 6804DM, 6804T, 6805A, 6806, 6808, 681T, PB20, and PB42 printers over a selected serial port.
PAGE 186
Chapter 5 — Printer Support The function call will fail for any of the following reasons: S Port associated with device during RegisterDevice() is currently in use. S The DTR device is already open. S The share mode is not set to zero. The device cannot be shared. S Access permissions are not set to GENERIC_WRITE. Closing the DTR Driver Using the CloseHandle() (hFile) function closes the DTR driver. Where hFile is the handle returned by the CreateFile() function call.
PAGE 187
6 Scanner Support The 700 Series Color Mobile Computer is available with imaging or laser scanning technologies, including the following: APS Linear Imager: (standard for 730 Computers) — includes the EV10 Scan Engine Reads 1D symbologies and PDF417 bar codes. Linear imaging using Vista Scanning technology reads low-contrast bar codes, laminated bar codes, and bar codes displayed on CRT or TRT displays. This imaging uses harmless LEDs for illumination and does not require any warning labels.
PAGE 188
Chapter 6 — Scanner Support A 700 Color ImageDemo application demonstrates the more common features of the 700 Color Computer imager. See the ImageDemo User’s Guide for information. Note: “700 Color” pertains to 740, 741, 750, 751, 760, and 761 Computers unless otherwise noted. Scanner Control and Data Transfer Note: To use the methods described below, enable Data Collection functionality on the 700 Computer using the bootloader configuration menu.
PAGE 189
Chapter 6 — Scanner Support Internal Scanners The Intermec Internal Scanner feature allows Automatic Data Collection (ADC) by accepting data from the COM1 port and wedging it into the keyboard interface. You can enable or disable this feature from the Today screen on the 700 Color Computer. Before you configure your internal scanner, adjust its settings using the Intermec Settings applet.
PAGE 190
Chapter 6 — Scanner Support Scanner and Imager Settings Depending on what is selected as the scanner model, image settings, decode security, scanner settings, and virtual wedge are configured from the Intermec Settings applet. See the the Intermec Computer Command Reference Manual, available from the Intermec web site at www.intermec.com, for more information about each enabled option.
PAGE 191
Chapter 6 — Scanner Support Reading Distances Typical reading distances are done in an office environment using office lights (4 lux). Minimum distances are measured in the dark (0 lux). Both reading distances are provided in respective scan engine integration guides. Contact your Intermec representative for more information. Below are minimum standard reading distances for 700 Color Computers built with integrated scan engines.
PAGE 192
Chapter 6 — Scanner Support EA11 Standard Minimum Reading Distances with 0.04” Setbacks Symbology Density Minimum Distance Maximum Distance Code 39 0.125 mm/ 5 mil 0.20 mm/ 8 mil 0.25 mm/ 10 mil 0.5 mm/ 20 mil 7.26 cm/ 2.86” 3.96 cm/ 1.56” 3.45 cm/ 1.36” 4.98 cm/ 1.96” 12.09 cm/ 4.76” 20.98 cm/ 8.26” 25.04 cm/ 9.86” 40.28 cm/ 15.86” UPC/EAN 0.33 mm/ 13 mil 4.98 cm/ 1.96” 29.62 cm/ 11.66” Data Matrix 0.191 mm/ 7.5 mil 0.254 mm/ 10 mil 0.381 mm/ 15 mil 3.71 cm/ 2.46” 5.98 cm/ 1.96” * 16.
PAGE 193
Chapter 6 — Scanner Support EL10 Minimum Guaranteed Reading Distances with 0.25” Setbacks Symbology Density Minimum Distance Maximum Distance Code 39 0.1 mm/ 4 mil 0.125 mm/ 5 mil 0.25 mm/ 10 mil 0.5 mm/ 20 mil 1 mm/ 40 mil 8.51 cm/ 3.35” 7.75 cm/ 3.05” 6.99 cm/ 2.75” 6.48 cm/ 2.55” 7.75 cm/ 3.05” 12.30 cm/ 4.45” 14.35 cm/ 5.65” 29.34 cm/ 11.55” 50.17 cm/ 19.75” 63.37 cm/ 24.95” UPC/EAN 0.33 mm/ 13 mil 5.46 cm/ 2.15” 34.42 cm/ 13.55” PDF417 0.17 mm/ 6.6 mil 7.75 cm/ 3.05” 19.43 cm/ 7.
PAGE 194
Chapter 6 — Scanner Support EV10 Minimum Reading Distances with 0.04” Setbacks Symbology Bar Code Content Density Minimum Distance Maximum Distance Code 39 RESO 0.100 MM R 0.125 MM 0.25 0.5 R1MM 0.1 mm/ 4 mil 0.125 mm/ 5 mil 0.25 mm/ 10 mil 0.5 mm/ 20 mil 1 mm/ 40 mil 10.8 cm/ 4.26” 9.80 cm/ 3.86” 5.99 cm/ 2.36” 3.96 cm/ 1.56” 7.53 cm/ 2.96” 13.87 cm/ 5.46” 16.92 cm/ 6.66” 23.77 cm/ 9.36” 30.89 cm/ 12.16” 39.78 cm/ 15.66” UPC/EAN 120010010100 0.33 mm/ 13 mil 4.98 cm/ 1.96” 25.81 cm/ 10.
PAGE 195
Chapter 6 — Scanner Support Tethered Scanners The Intermec Tethered Scanner feature allows Automatic Data Collection (ADC) by accepting data from the COM1 port and wedging it into the keyboard interface. You can enable or disable this feature from the Today screen on the 700 Color Computer. Configuring the Tethered Scanner Before you configure your tethered scanner, adjust its settings using the Intermec Settings applet.
PAGE 196
Chapter 6 — Scanner Support 4 Tap (+) to expand Scanner Settings, tap Scanner model, then enter the applicable scanner, such as “1551E” or “1553.” 5 Make sure a scanner is properly connected to your 700 Computer, tap to check Enable scanner port, then tap File > Save Settings from the bottom of the screen. These changes take several moments to reset.
PAGE 197
Chapter 6 — Scanner Support Manual, available from the Intermec web site at www.intermec.com, for more information about each enabled option. ASCII Selected for Scanner Model To send data coming into the 700 Color Computer through the COM1 port from an external input device, as keyboard data to an application on the desktop, do the following: 1 Enter “ASCII” as the Scanner model option. 2 Tap to check Enable scanner port.
PAGE 198
Chapter 6 — Scanner Support Reset Factory Defaults Scan the EasySet software bar code label “Reset Factory Default” to restore all of your scanner’s configurations to their factory defaults. When this command label is scanned, reinitialize the tethered scanner (such as disable the scanner port state, then enable it) on the 700 Computer. Otherwise, the online configuration and scanning on the 700 Computer are not functional. In general, scan this label only to initially reset the scanner.
PAGE 199
Chapter 6 — Scanner Support Symbologies PDF417 Micro PDF417 1551E 1553 Available in 1551 0808 PDF Available in 1551 0808 PDF, Sxxp217_ or later MaxiCode Data Matrix QR Code RSS 14 F/w version 2.15 or later F/w version 2.15 or later RSS Limited F/w version 2.15 or later F/w version 2.15 or later RSS Expanded F/w version 2.15 or later F/w version 2.
PAGE 200
Chapter 6 — Scanner Support Do the following to configure your virtual wedge to do RFID tags. S Configure at least one scan button on the 700 Color Computer to trigger RFID (go to the next paragraph). S Disable power to Bluetooth (go to page 183 for instructions). S Enable the IP4 Reader (go to page 184 for instructions). Use the Intermec Settings applet to configure at least one scan button.
PAGE 201
Chapter 6 — Scanner Support 3 Select RFID to change the trigger from the scanner to RFID, then select File > Save Settings. 4 Go to the next paragraph to disable power to Bluetooth. 5 Go to page 184 to enable the IP4 Reader. Disable Power to Bluetooth Note: Before you configure your attached IP4 Reader, make sure Bluetooth is disabled on your 700 Color Computer. 1 Tap Start > Settings > the Connections tab > the Bluetooth icon. 2 Check whether Off is selected. If not, then check Off.
PAGE 202
Chapter 6 — Scanner Support Configure the Reader Using Intermec Settings You should also adjust its settings using the Intermec Settings applet. Information about the settings you can configure with this applet is described in the Intermec Computer Command Reference Manual. The online manual is available from the Intermec web site at www.intermec.com. 1 Connect your reader to the reader port.
PAGE 203
Chapter 6 — Scanner Support 3 Under the Reader option, check Enable Reader to enable the attached reader. Once the IP4 reader is configured using the Intermec Settings applet, applications can access the IP4 Reader using the Basic Reader Interface (BRI) protocol on the 700 Color TCP port “2189.
PAGE 204
Chapter 6 — Scanner Support 186 700 Series Color Mobile Computer User’s Manual
PAGE 205
7 Programming The following programming information pertains to the 700 Series Color Mobile Computer: S Creating CAB Files (page 188) S Customization and Lockdown (page 202) S FTP Server (page 203) S Kernel I/O Control Functions (page 210) S Network Selection APIs (page 221) S Notifications (page 221) S Reboot Functions (page 222) S Remapping the Keypad (page 223) Note: “700 Color” pertains to 730, 740, 741, 750, 751, 760, and 761 Computers unless otherwise noted.
PAGE 206
Chapter 7 — Programming Creating CAB Files The Windows CE operating system uses a .CAB file to install an application on a Windows CE-based device. A .CAB file is composed of multiple files that are compressed into one file. Compressing multiple files into one file provides the following benefits: S All application files are present. S A partial installation is prevented. S The application can be installed from several sources, such as a desktop computer or a Web site.
PAGE 207
Chapter 7 — Programming [CEStrings] This specifies string substitutions for the application name and the default installation directory. Required? Yes S AppName: app_name Name of the application. Other instances of %AppName% in the .INF file are replaced with this string value, such as RP32. S InstallDir: default_install_dir Default installation directory on the device. Other instances of %InstallDir% in the .INF file are replaced with this string value.
PAGE 208
Chapter 7 — Programming Example [CEDevice] UnsupportedPlatforms = pltfrm1 ; pltfrm1 is unsupported [CEDevice.SH3] UnsupportedPlatforms = ; pltfrm1 is still unsupported S VersionMin: minor_version Numeric value returned by OSVERSIONINFO.dwVersionMinor. The .CAB file is valid for the currently connected device if the version of this device is greater than or equal to VersionMin. S VersionMax: major_version Numeric value returned by OSVERSIONINFO.dwVersionMajor. The .
PAGE 209
Chapter 7 — Programming [DefaultInstall] This describes the default installation of your application. Note that under this section, you will list items expanded upon later in this description. Required? Yes S Copyfiles: copyfile_list_section Maps to files defined later in the .INF file, such as Files.App, Files.Font, and Files.Bitmaps. S AddReg: add_registry_section Example: RegSettings.
PAGE 210
Chapter 7 — Programming [SourceDiskFiles] This describes the name and path of the files in which your application resides. Required? Yes S filename: disk_number[,subdir] RPM.EXE = 1,c:\appsoft\... WCESTART.INI = 1 RPMCE212.INI = 1 TAHOMA.TTF = 2 Note: [,subdir] is relative to the location of the INF file. Example [SourceDisksFiles] ; Required section begin.wav = 1 end.wav = 1 sample.hlp = 1 [SourceDisksFiles.SH3] sample.exe = 2 ; Uses the SourceDisksNames.SH3 identification of 2. [SourceDisksFiles.
PAGE 211
Chapter 7 — Programming Contains the path to the target directory selected during installation. It is declared in the [CEStrings] section %AppName% Contains the application name defined in the [CEStrings] section. Example [DestinationDirs] Files.Common = 0,%CE1%\My Subdir Files.Shared = 0,%CE2% ; \Program Files\My Subdir ; \Windows [CopyFiles] This section, under the [DefaultInstall] section, describes the default files to copy to the target device.
PAGE 212
Chapter 7 — Programming S add_registry_section: registry_root_string String that specifies the registry root location. The following list shows the values supported by Windows CE. S HKCR Same as HKEY_CLASSES_ROOT S HKCU Same as HKEY_CURRENT_USER S HKLM Same as HKEY_LOCAL_MACHINE S add_registry_section: value_name Registry value name. If empty, the “default” registry value name is used. S add_registry_section: flags Numeric value that specifies information about the registry key.
PAGE 213
Chapter 7 — Programming S shortcut_list_section: target_file_path String value that specifies the destination location. Use the target file name for a file, such as MyApp.exe, that must be defined in a file copy list. For a path, use a file_list_section name defined in the [DestinationDirs] section, such as DefaultDestDir, or the %InstallDir% string. S shortcut_list_section: standard_destination_path Optional string value. A standard %CEx% path or %InstallDir%.
PAGE 214
Chapter 7 — Programming fmtctrl.dll = 1,c:\rptools\fmtctrl\1_00\wce400\wcex86rel6110 ugrid.dll = 1,c:\rptools\ugrid\1_00\wce400\wcex86rel6110 simple.dll = 1,c:\rptools\pspbm0c\1_00\wce400\wcex86rel psink.dll = 1,c:\rptools\psink\1_00\wce400\WCEX86RelMinDependency pslpwce.dll =1,c:\rptools\pslpm0c\1_00\wce400\WCEX86RelMinDependency npcpport.dll = 1,c:\rptools\cedk\212_03\installable drivers\printer\npcp ;dexcom.dll = 1,c:\rptools\psdxm0c\1_00\x86 ncsce.exe = 1,c:\rptools\ncsce\1_04 nrinet.
PAGE 215
Chapter 7 — Programming import.bmp,,,0 export.bmp,,,0 clock.bmp,,,0 printer.bmp,,,0 filecopy.bmp,,,0 [Files.Intl] lang_eng.bin,,,0 [Files.TelecomNcsCE] ncsce.exe,,,0 nrinet.dll,,,0 [Files.Windows] readme.txt,,,0 [Files.Import] readme.txt,,,0 [Files.Export] readme.txt,,,0 [Files.Work] readme.txt,,,0 [Files.WinCE] wcestart.ini,,,0 [RegSettings.
PAGE 216
Chapter 7 — Programming After the CAB File Extraction Cab files that need to cause a warm reset after cab extraction will need to create the __RESETMEPLEASE__.TXT file in the “\Windows” directory. The preferred method to create this file is within the DllMain portion of the SETUP.DLL file. It looks like this: #include #include #include #include
PAGE 217
Chapter 7 — Programming thDeviceProcessID = 0; do { _tcslwr( peProcess.szExeFile ); if ( _tcsstr( peProcess.szExeFile, lpname ) ) { thDeviceProcessID = peProcess.
PAGE 218
Chapter 7 — Programming exists, it is not fatal. // Otherwise, notify user of the inability to reset the device and they will have to // perform it manually after all of the installations are complete. } // end if } else { DWORD dret; h = CreateFile( L”SYI1:”, (GENERIC_WRITE | GENERIC_READ), 0, NULL, OPEN_EXISTING, FILE_ATTRIBUTE_NORMAL, NULL ); // Force a warm start NOW.
PAGE 219
Chapter 7 — Programming Creating CAB Files with CAB Wizard After you create the .INF file and the optional SETUP.DLL file, use the CAB Wizard to create the .CAB file. Below is the command-line syntax: cabwiz.exe “inf_file” [/dest dest_directory] [/err error_file] [/cpu cpu_type [cpu_type]] A batch file in directory, with these commands, works well: cabwiz.exe c:\appsoft\\ cd \appsoft\ “inf_file” The SETUP.INF file path.
PAGE 220
Chapter 7 — Programming Customization and Lockdown Pocket PC (Windows Mobile) is a hardware specification created by Microsoft Corporation. Devices that wish to carry the Pocket PC logo must meet the minimum hardware requirements set in the Pocket PC specification. Manufacturers are free to add extra hardware functionality. Pocket PC devices also use a specialized version of the CE operating system. This operating system is built from Windows CE 4.
PAGE 221
Chapter 7 — Programming FTP Server FTP support is provided through the FTP Server application FTPDCE.EXE (MS Windows CE Versions) which is provided as part the base system. FTPDCE is the Internet File Transfer Protocol (FTP) server process. The server can be invoked from an application or command line. Besides servicing FTP client requests the FTP Server also send a “network announcement” to notify prospective clients of server availability.
PAGE 222
Chapter 7 — Programming Configurable Parameters Via the Registry Editor These parameters receive default values during the Intermec FTP Server component installation. Few of the parameters are visible in the registry by default, but most must be created to modify the FTP server behavior. BlockSize Setting this parameter configures the Intermec FTP Server to transmit and receive Ethernet packets using the specified data block size.
PAGE 223
Chapter 7 — Programming ManifestName This parameter configures the Intermec FTP Server to transmit the specified manifest name in the IDNA. This parameter is used by the Intermec 6920 Communications Server for communication transactions. See the 6920 Server documentation for proper use of this parameter. Key HKLM\Software\Intermec\IFTP Value Type REG_SZ Valid Range None. Default iftp.
PAGE 224
Chapter 7 — Programming DELE Deletes a file. HELP Gives help information. LIST (This FTP request is the same as the ls -lgA command). Gives list files in a directory. MKD Makes a directory. MODE (Always Uses Binary). Specifies data transfer mode. NLST (Not supported) Gives a name list of files in directory (this FTP request is the same as the ls command). NOOP Does nothing. PASS Specifies a password. PWD Prints the current working directory. QUIT Terminates session.
PAGE 225
Chapter 7 — Programming If the flag exists in its position shown previously, it is set. Also, in addition to the values defined above, there is also defined: C Compressed file attribute. E Encrypted file attribute. I INROM file attribute. X XIP file attribute (execute in ROM, not shadowed in RAM). BOOT Reboots the server OS. This will cause the system on which the server is executing to reboot. The FTP Server will shut down cleanly before reboot. All client connections will be terminated.
PAGE 226
Chapter 7 — Programming GVAL Gives site command general value information. (SITE HELP) Usage: PVAL QUOTE SITE GVAL [command] Gives site command value information. (SITE HELP) Usage: QUOTE SITE PVAL [command] The remaining FTP requests specified in RFC 959 are recognized, but not implemented. The banner returned in the parenthetical portion of its greeting shows the version number of the FTP Server as well as the MAC address, serial number and operating system of the machine hosting the server.
PAGE 227
Chapter 7 — Programming For examples on how to use events, consult the Microsoft Developer Network Library at www.msdn.com. The MSDN Library is an essential resource for developers using Microsoft tools, products, and technologies. It contains a bounty of technical programming information, including sample code, documentation, technical articles, and reference guides. Autostart FTP This automatically starts the FTP Server (FTPDCE.EXE) when the 700 Color Computer is powered on.
PAGE 228
Chapter 7 — Programming To do an AutoFTP Installation Check: 1 Ensure the FTP Server is running “out-of-the-box” the first time. 2 Tap Start > Today to access the Today screen, then tap the antenna icon in the System Tray to bring up the NDISTRAY pop-up menu. Select AutoFTP Off to disable AutoFTP. Do a warm boot and confirm the FTP Server is not running. 3 Tap Start > Today to access the Today screen, then tap the antenna icon in the System Tray to bring up the NDISTRAY pop-up menu.
PAGE 229
Chapter 7 — Programming Parameters lpInBuf Points to a DWORD containing either the SPI_GETPLATFORMTYPE or SPI_GETOEMINFO value. lpInBufSize Must be set to sizeof(DWORD). lpOutBuf Must point to a buffer large enough to hold the return data of the function. If SPI_GETPLATFORMTYPE is specified in lpInBuf, then the “PocketPC\0” Unicode string is returned. If SPI_GETOEMINFO is specified in lpInBuf, then the “Intermec 700\0” Unicode string is returned. nOutBufSize The size of lpOutBuf in bytes.
PAGE 230
Chapter 7 — Programming ID Field Values The id field of the PARMS structure may be one of the following values: ID Field Values ITC_NVPARM_ETHERNET_ID Returns Ethernet 802.11b or 802.11b/g MAC Address. Six bytes returned in buffer pointed to by lpOutBuffer ITC_NVPARM_SERIAL_NUM Returns serial number of device in BCD format. Six bytes returned in buffer pointed to by lpOutBuffer ITC_NVPARM_MANF_DATE Returns device manufacture date in BCD YYYY/MM/DD format.
PAGE 231
Chapter 7 — Programming ID Field Values (continued) ITC_NVPARM_INTERMEC_DATACOLLECTION_HW Reads data collection hardware flags. BYTE returned in buffer pointer to by lpOutBuffer indicating type of data collection hardware installed. Maximum value returned is ITC_DEVID_SCANHW_MAX: S ITC_DEVID_SCANHW_NONE No scanner hardware installed. S ITC_DEVID_OEM2D_IMAGER OEM 2D imager installed. S ITC_DEVID_INTERMEC2D_IMAGER Intermec 2D imager installed. S ITC_DEVID_SE900_LASER SE900 laser installed.
PAGE 232
Chapter 7 — Programming IOCTL_HAL_ITC_WRITE_SYSPARM Describes and enables the registry save location. Usage #include “oemioctl.h” Syntax BOOL KernelIoControl( IOCTL_HAL_ITC_WRITE_SYSPARM,LPVOID lpInBuf,DWORD nInBufSize, LPVOID lpOutBuf, DWORD nOutBufSize, LPDWORD lpBytesReturned ); Parameters lpInBuf A single byte that may be one of the id values. See “ID Field Values” on the next page. nInBufSize Must be set to the size of the lpInBuf in bytes.
PAGE 233
Chapter 7 — Programming ID Field Values (continued) ITC_ WAKEUP_MASK This IOCTL sets a bit mask that represents the mask for the five programmable wakeup keys. The I/O key is not a programmable wakeup key. By default it is always the system resume key and all other keys are set to disable key wakeup. A zero in a bit position masks the wakeup for that key. A one in a bit position enables wakeup for that key.
PAGE 234
Chapter 7 — Programming IOCTL_HAL_GET_OAL_VERINFO Returns the HAL version information of the Pocket PC image. Usage #include “oemioctl.h” Syntax BOOL KernelIoControl( IOCTL_HAL_GET_OAL_VERINFO,LPVOID lpInBuf,DWORD nInBufSize,LPVOID lpOutBuf,DWORD nOutBufSize,LPDWORD lpBytesReturned ); Parameters lpInBuf Should be set to NULL. lpInBufSize Should be set to zero. lpOutBuf Must point to a VERSIONINFO structure as defined by OEMIOCTL.H.
PAGE 235
Chapter 7 — Programming lpOutBuf Must point to a VERSIONINFO structure as defined by OEMIOCTL.H. The fields should have these values: S cboemverinfo Sizeof (tagOemVerInfo); S verinfover 1 S sig; “ITC\0” S id; ‘B’ S tgtcustomer “” S tgtplat SeaRay S tgtplatversion Current build version number of the bootstrap loader S tgtcputype[8]; “Intel\0”; S tgtcpu “PXA255\0” S tgtcoreversion “” S date Build time S time Build date nOutBufSize The size of VERSIONINFO in bytes.
PAGE 236
Chapter 7 — Programming Parameters lpInBuf Should be set to NULL. lpInBufSize Should be set to zero. lpOutBuf Should be NULL. nOutBufSize Should be zero. Return Values None. IOCTL_HAL_GET_RESET_INFO This code allows software to check the type of the most recent reset. Usage #include “oemioctl.h” Syntax BOOL KernelIoControl( IOCTL_HAL_GET_RESET_INFO,LPVOID lpInBuf,DWORD nInBufSize,LPVOID lpOutBuf,DWORD nOutBufSize,LPDWORD lpBytesReturned ); Parameters lpInBuf Should be set to NULL.
PAGE 237
Chapter 7 — Programming IOCTL_HAL_GET_BOOT_DEVICE This IOCTL code allows software to check which device CE booted from. Usage #include “oemioctl.h” Syntax BOOL KernelIoControl( IOCTL_HAL_GET_BOOT_DEVICE,LPVOID lpInBuf,DWORD nInBufSize,LPVOID lpOutBuf,DWORD nOutBufSize,LPDWORD lpBytesReturned ); Parameters lpInBuf Should be set to NULL. lpInBufSize Should be set to zero. lpOutBuf Must point to a buffer large enough to hold a DWORD (4 bytes) with the boot device.
PAGE 238
Chapter 7 — Programming IOCTL_PROCESSOR_INFORMATION Returns processor information. Usage #include “pkfuncs.h” Syntax BOOL KernelIoControl( IOCTL_PROCESSOR_INFORMATION,LPVOID lpInBuf,DWORD nInBufSize,LPVOID lpOutBuf,DWORD nOutBufSize,LPDWORD lpBytesReturned ); Parameters lpInBuf Should be set to NULL. nInBufSize Should be set to zero. lpOutBuf Should be a pointer to the PROCESSOR_INFO structure. Its structure stores information describing the CPU more descriptively.
PAGE 239
Chapter 7 — Programming lpOutBuf Should be NULL. nOutBufSize Should be set to 0. lpBytesReturned Returns sizeof(PROCESSOR_INFO); Return Values Returns TRUE if function succeeds. Returns FALSE if the function fails. GetLastError() may be used to get the extended error value. Network Selection APIs Network Selection APIs change the network adapter configuration programmatically. See the Communications Resource Kit in the IDL for information about these APIs.
PAGE 240
Chapter 7 — Programming Parameters nInfoId pOutput Integer specifying the information to return. These values are defined: NLED_COUNT_INFO pOutput buffer specifies the number of LEDs on the device. NLED_SUPPORTS_INFO_ID pOutput buffer specifies information about the capabilities supported by the LED. NLED_SETTINGS_INFO_ID pOutput buffer has information about LED current settings. Pointer to the buffer to which the information is returned.
PAGE 241
Chapter 7 — Programming Remapping the Keypad Note: Use caution when remapping the keypad. Improper remapping may render the keypad unusable. Data within the 700 Color Computer could also be lost, should any problems occur. Applications have the ability to remap keys on the 700 Color Numeric Keypad and 700 Color Alphanumeric Keypad. This will allow applications to enable keys that would otherwise not be available, such as the [F1] function key.
PAGE 242
Chapter 7 — Programming Alpha (Blue) Plane The alpha plane contains values from the keypad when the keypad has been placed in alpha mode by pressing the blue alpha key, such as: Press the Keys Numeric Keypad Alphanumeric Keypad To Enter This [Alpha] F 1 [Alpha] d g Caps [Alpha] F 5 [Alpha] d J j [Alpha] F 9 [Alpha] d W w Key Values Key values are stored in the registry. All units ship with a default key mapping in its registry.
PAGE 243
Chapter 7 — Programming Each registry key is just an array that describes to the keypad driver what value needs to be passed for each physical key. The key values are indexed by the scan code, this is a zero-based index. For example in the unshifted plane, the [4] key has a scan code of 0x06. This means that the seventh word under the “Vkey” registry key will have the value for the [4] key.
PAGE 244
Chapter 7 — Programming Scan Codes At the lowest driver level, the 700 Color Numeric and Alphanumeric Keypads identify keys as scan codes. The keypad microcontroller sends the codes and only the keypad firmware changes the codes.
PAGE 245
Chapter 7 — Programming Alphanumeric Keypad Scan Codes and Meanings Press this Key Meaning Press ScanCode this Key Meaning ScanCode Reserved 0x00 N N/2 0x17 I/O button 0x01 I I/backlight 0x18 Scanner Handle Trigger 0x02 P P/PgDn 0x19 Scanner Left 0x03 Q Q/, (comma) 0x1A Scanner Right 0x04 R R/+ (plus sign) 0x1B A A/A1 key 0x05 S S/4 0x1C B B/A2 key 0x06 T T/5 0x1D e Escape/Send 0x07 O O/3 0x1E j Left arrow/Back Tab 0x08 g Caps/Lock 0x1F k Up arrow/Volu
PAGE 246
Chapter 7 — Programming Sample View of Registry Keys Below is a sample of the current default key mapping for the 700 Color Numeric Keypad. See your device registry for the latest key mappings.
PAGE 247
A Configurable Settings This appendix contains information about the Intermec Settings, Utilities, and Wireless Network applets on the 700 Color Mobile Computer. Note: “700 Color” pertains to 740, 741, 750, 751, 760, and 761 Computers unless otherwise noted. The contents of the Intermec Settings applet are dependent on what hardware configuration is done for each 700 Color Computer at the time of shipment. These settings currently only appear if a scanner or an imager option is present.
PAGE 248
Appendix A — Configurable Settings Configuration Parameters A configuration parameter changes the way the 700 Color Computer operates, such as configuring a parameter to have the 700 Color Computer emit a very loud beep in a noisy environment. To execute configuration parameters, scan EasySet bar codes. You can use the EasySet bar code creation software from Intermec to print configuration labels. Scan the labels to change the scanner configuration and data transfer settings.
PAGE 249
Appendix A — Configurable Settings Intermec Settings Applet Information about the settings you can configure with this applet is described in the Intermec Computer Command Reference Manual. The online manual is available from the Intermec web site at www.intermec.com. See the Data Collection Resource Kit in the Intermec Developer Library (IDL) for information about data collection functions. The IDL is available as a download from the Intermec web site at www.intermec.com/idl.
PAGE 250
Appendix A — Configurable Settings Dock Switch From the 700 Color Computer, tap Start > Settings > the System tab > Utilities > the Dock Switch tab to access the Dock Switch applet. Use this applet to control the position of the dock switch. This can be set either to a COM A (phone jack for a modem) position or to a COM B (serial) position. If switched to COM B and suspended, the terminal has the following behavior: S If the 700 Color Computer is on charge, the dock switch remains switched to COM B.
PAGE 251
Appendix A — Configurable Settings To ensure that the 700 Color Computer restores the real-time clock after a cold-boot, check the Enable RTC Restore option. Note that this does not apply to the 730 Computer. 700 Color Screen 730 Screen Wakeup Mask From the 700 Color Computer, tap Start > Settings > the System tab > Utilities > the Wakeup Mask tab to access the Wakeup Mask applet. This applet programs three scanner buttons and the A1 and A2 application keys to be “wakeup” or resume keys.
PAGE 252
Appendix A — Configurable Settings Based on your setting, do the following to “wake up” the 700 Computer: If you select: Then do this on Numeric Keyboard Then do this on Alphanumeric Keyboard Middle Scanner Button Squeeze the button on the Scan Handle Squeeze the button on the Scan Handle Left Scanner Button Squeeze the left scanner button Squeeze the left scanner button Right Scanner Button Squeeze the right scanner button Squeeze the right scanner button GOLD + A1 (Application 1) Press [Gold
PAGE 253
Appendix A — Configurable Settings S To disable or unmap a currently mapped application from a corresponding button, select “unassigned” from the applicable drop-down list. S To restore these buttons to their defaults, tap Defaults in the lower right corner. Note; You cannot map an application to more than one button. Should you assign the same application to two buttons, a verification prompt will appear after the second button to confirm whether you want to remap the application.
PAGE 254
Appendix A — Configurable Settings S EAP (Extensible Authentication Protocol) 802.11b or 802.11b/g uses this protocol to perform authentication. This is not necessarily an authentication mechanism, but is a common framework for transporting actual authentication protocols. Intermec provides a number of EAP protocols to choose for your network. S TKIP (Temporal Key Integrity Protocol) This protocol is part of the IEEE 802.11i encryption standard for wireless LANs.
PAGE 255
Appendix A — Configurable Settings Use the Profiles page to select and configure between the networking environments assigned to this 802.11b or 802.11b/g radio. S Profile: Tap the drop-down list to choose between four different profiles assigned to this unit, then tap Edit Select Profile, make the changes needed for this profile (starting on the next page), then tap OK to return to the Profiles page.
PAGE 256
Appendix A — Configurable Settings S Enable Power Management: Check this box to conserve battery power (default), or clear this box to disable this feature. Security The following are available from the 8021x Security drop-down list. Note the last four methods are available if you have purchased the security package. Contact your Intermec representative for information.
PAGE 257
Appendix A — Configurable Settings To Enable WEP Encryption 1 Set 8021x Security as “None.” 2 Set Association to either “Open” if WEP keys are not required; or “Shared” when WEP keys are required for association. 3 Set Encryption to “WEP” (see page 236). 4 If you had set Association to “Shared,” then select a data transmission key from the Data TX Key drop-down list near the bottom of this screen, then enter the encryption key for that data transmission in the appropriate Key # field.
PAGE 258
Appendix A — Configurable Settings PEAP (Protected EAP) This protocol is suitable for performing secure authentication against Windows domains and directory services. It is comparable to EAP-TTLS (see page 244), both in its method of operation and its security, though not as flexible. This does not support the range of inside-the-tunnel authentication methods supported by EAP-TTLS. Microsoft and Cisco both support this protocol.
PAGE 259
Appendix A — Configurable Settings 5 Tap Additional Settings to assign an inner PEAP authentication and set options for server certificate validation and trust (see page 242). To Enable PEAP with Network EAP 1 Set 8021x Security as “PEAP.” 2 Set Association to “Network EAP” (see page 236). 3 Set Encryption to either “WEP” (page 236) or “CKIP” (page 235). 4 Enter your unique user name and password to use this protocol.
PAGE 260
Appendix A — Configurable Settings Additional Settings 1 Select an authentication method from the Inner PEAP Authentication drop-down list. EAP/MS-CHAP-V2 Authenticates against a Windows Domain Controller and other non-Windows user databases. This is Microsoft’s implementation of PEAP. EAP/Token Card Use with token cards. The password value entered is never cached. This is Cisco’s implementation of PEAP. EAP/MD5-Challenge Message Digest 5. A secure hashing authentication algorithm.
PAGE 261
Appendix A — Configurable Settings 4 Tap Get Certificates to obtain or import server certificates (page 247). 5 Tap Additional Settings to set server certificate validation (page 244). To Enable TLS with WPA Encryption 1 Set 8021x Security as “TLS.” 2 Set Association to “WPA” (see page 236). 3 Enter unique Subject Name and User Name credentials for this profile. 4 Tap Get Certificates to obtain or import server certificates (page 247).
PAGE 262
Appendix A — Configurable Settings Additional Settings 1 Check Validate Server Certificate to verify the identity of the authentication server based on its certificate when using PEAP or TLS. 2 Enter the Common Names of trusted servers. Note that if these fields are left blank, the server certificate trust validation is not performed or required. 3 Click ok to return to the Security page.
PAGE 263
Appendix A — Configurable Settings To Enable TTLS with WPA Encryption 1 Set 8021x Security as “TTLS.” 2 Set Association to “WPA” (see page 236). 3 Enter your unique user name and password to use this protocol. Select Prompt for password to have the user enter this password each time to access the protocol, or leave Use following password as selected to automatically use the protocol without entering a password. 4 Tap Get Certificates to obtain or import server certificates (page 247).
PAGE 264
Appendix A — Configurable Settings Additional Settings 1 Select an authentication protocol from the Inner TTLS Authentication drop-down list: PAP Password Authentication Protocol. A simple authentication protocol that sends security information in the clear. CHAP Challenge Handshake Authentication Protocol. Use of Radius to authenticate a terminal without sending security data in the clear. Authenticates against non-Windows user databases.
PAGE 265
Appendix A — Configurable Settings To Get Certificates Certificates are pieces of cryptographic data that guarantee a public key is associated with a private key. They contain a public key and the entity name that owns the key. Each certificate is issued by a certificate authority. Use this page to import a certificate onto the 700 Color Computer. Root Certificates 1 Tap the <<< button next to the Import Root Certificate field to select the root certificate (DER-encoded .CER file) to import.
PAGE 266
Appendix A — Configurable Settings 3 Select Prompt for password to have the user enter this password each time to access the protocol, or leave Use following password as selected to automatically use the protocol without entering a password. To Enable LEAP with WPA Encryption 1 Set 8021x Security as “LEAP” and Association to “WPA” (see page 236). 2 Enter your unique User Name to use this protocol.
PAGE 267
Appendix A — Configurable Settings 3 Select Prompt for password to have the user enter this password each time to access the protocol, or leave Use following password as selected to automatically use the protocol without entering a password. EAP-FAST (EAP -Flexible Authentication via Secured Tunnel) The EAP-FAST protocol is a client-server security architecture that encrypts EAP transactions with a TLS tunnel.
PAGE 268
Appendix A — Configurable Settings 4 Tap Additional Settings to set options for PAC management and assign an anonymous EAP-FAST name (see page 251). To Enable EAP-FAST with WPA Encryption 1 Set 8021x Security as “EAP-FAST” and Association to “WPA” (see page 236). 2 Enter your unique Username to use this protocol.
PAGE 269
Appendix A — Configurable Settings 2 Enter your unique Username to use this protocol. 3 Select Prompt for password to have the user enter this password each time to access the protocol, or leave Use following password as selected to automatically use the protocol without entering a password. 4 Tap Additional Settings to set options for PAC management and assign an anonymous EAP-FAST name. See below for more information.
PAGE 270
Appendix A — Configurable Settings 5 Check ok to return to the Security page. Advanced Use this page to configure additional settings for this profile. Tap ok or OK to return to the Profiles page. S Detect Rogue APs: Wireless NICs and APs associate based on the SSID configured for the NIC. Given an SSID, the BSSID with the strongest signal is often chosen for association. After association, 802.
PAGE 271
Appendix A — Configurable Settings S Enable Logging: Check this box to log what activity incurs for this profile. Other Configurable Parameters These can be configured by sending reader commands (next page) through the network or from an application. Audio Volume Changes the volume of all audio signals. 0 1 2 3 4 5 Off Very quiet Quiet Normal (default) Loud Very loud Automatic Shutoff Sets the length of time the 700 Color Computer remains on when there is no activity.
PAGE 272
Appendix A — Configurable Settings Using Reader Commands After the 700 Color Computer is connected to your network, you can send the 700 Color Computer a reader command from an application to perform a task, such as changing the time and date. Some reader commands temporarily override the configuration settings and some change the configuration settings. Change Configuration The Change Configuration command must precede any configuration command.
PAGE 273
Appendix A — Configurable Settings Set Time and Date This command sets the date and time on the 700 Color Computer. The default date and time is June 1, 1999 at 12:00 AM.
PAGE 274
Appendix A — Configurable Settings Set Audio Volume to very quiet *$+BV1* *$+VB1* Set Audio Volume to quiet *$+BV2* *$+BV2* Set Audio Volume to normal (default) *$+BV3* *$+BV3* Set Audio Volume to loud *$+BV4* *$+BV4* Set Audio Volume to very loud *$+BV5* *$+BV5* Automatic Shutoff Note: The Automatic Shutoff parameter information is on page 253.
PAGE 275
Appendix A — Configurable Settings Backlight Timeout 30 seconds *$+DF30* *$+DF30* Backlight Timeout 1 minute (default) *$+DF60* *$+DF60* Backlight Timeout 2 minutes *$+DF120* *$+DF120* Backlight Timeout 3 minutes *$+DF180* *$+DF180* Backlight Timeout 4 minutes *$+DF240* *$+DF240* Backlight Timeout 5 minutes *$+DF300* *$+DF300* Key Clicks Note: The Key Clicks parameter information is on page 253.
PAGE 276
Appendix A — Configurable Settings Preamble For Virtual Wedge Preamble, the first part of the bar code is below, followed by a string of up to 31 characters (no ) and an asterisk. Default is no characters. *$+AD *$+AD Postamble For Virtual Wedge Postamble, the first part of the bar code is below, followed by a string of up to 31 characters (no ) and an asterisk. Default is no characters.
PAGE 277
B Troubleshooting This appendix contains a brief explanation of what you can do to troubleshoot your 700 Color Mobile Computer.
PAGE 278
Appendix B — Troubleshooting Problem Solutions The 700 Color Computer does not respond when connected to a power supply. Make sure your ac adapter or dock is plugged in and is making good contact with your mobile computer. The 700 Color Computer will not turn on when the I/O key is pressed. The AB10 battery may be low and need recharging. The Power status LED starts blinking. The Power status LED provides the status of your battery pack when it is connected to a charging device.
PAGE 279
I Index The Classes and Functions Index covers 700 Color classes and functions. The General Index covers all topics. Those in italics are figures, those in bold are tables. The Files Index is to assist you in locating descriptions for device drivers, applications, utilities, batch files, or other files within this publication.
PAGE 280
Index Classes and Functions A add_registry_section, [AddReg] flags, 194 registry_root_string, 194 value_name, 194 AddReg, [DefaultInstall], 191 [AddReg], add_registry_section flags, 194 registry_root_string, 194 value_name, 194 AppName, [CEStrings], 189 Asset management, DeviceURL parameter, 204 B BlockSize, FTP Server, 204 BuildMax, [CEDevice], 190 BuildMin, [CEDevice], 190 C [CEDevice] BuildMax, 190 BuildMin, 190 ProcessorType, 189 UnsupportedPlatforms, 189 VersionMax, 190 VersionMin, 190 CESelfRegister,
PAGE 281
Index QUIT, 206 RETR, 206 RMD, 206 RNFR, 206 RNTO, 206 SITE, 206 SITE ATTRIB, 206 SITE BOOT, 207 SITE COPY, 207 SITE EKEY, 207 SITE EVAL, 207 SITE EXIT, 207 SITE GVAL, 208 SITE HELP, 207 SITE KILL, 207 SITE LOG, 207 SITE PLIST, 207 SITE PVAL, 208 SITE RUN, 207 SITE STATUS, 207 SITE TIMEOUT, 207 STOR, 206 SYST, 206 TYPE, 206 USER, 206 XCUP, 206 XCWD, 206 XMKD, 206 XPWD, 206 XRMD, 206 stopping server from application, 208 support, 205 web browsers, 208 H HAL, verion of Pocket PC IOCTL_HAL_GET_BOOTLOADER_VERI
PAGE 282
Index ITC_DEVID_SCANHW_MAX values ITC_DEVID_INTERMEC_EVIO, 213 ITC_DEVID_INTERMEC2D_IMAGER, 213 ITC_DEVID_OEM2D_IMAGER, 213 ITC_DEVID_SCANHW_NONE, 213 ITC_DEVID_SE900_LASER, 213 ITC_DEVID_SE900HS_LASER, 213 ITC_DEVID_SCANHW_NONE, 213 ITC_DEVID_SE900_LASER, 213 ITC_DEVID_SE900HS_LASER, 213 ITC_DEVID_WANRADIO_NONE, 213 ITC_DEVID_WANRADIO_SIEMENS_MC45, 213 ITC_DEVID_WANRADIO_SIEMENS_MC46, 213 ITC_DEVID_WANRADIO_SIERRA_SB555, 213 ITC_DEVID_WANRADIO_XIRCOM_GEM3503, 213 ITC_IFTP_STOP, 208 ITC_NVPARM_80211_INSTAL
PAGE 283
Index IOCTL_HAL_WARMBOOT, 217 IOCTL_PROCESSOR_INFORMATION, 220 M ManifestName, FTP Server, 205 N nDeviceId, NLEDGetDeviceInfo, 222 nInBufSize IOCTL_HAL_GET_BOOTLOADER_VERINFO, 216 IOCTL_HAL_ITC_READ_PARM, 211 IOCTL_HAL_ITC_WRITE_SYSPARM, 214 IOCTL_PROCESSOR_INFORMATION, 220 nInfoId, NLEDGetDeviceInfo, 222 NLED_COUNT_INFO, NLEDGetDeviceInfo, 222 NLED_SETTINGS_INFO_ID, NLEDGetDeviceInfo, 222 NLED_SUPPORTS_INFO_ID, NLEDGetDeviceInfo, 222 NLEDGetDeviceInfo, 221 NLEDSetDevice, 222 nOutBufSize IOCTL_GET_CPU_ID,
PAGE 284
Index W WAN radio IDs ITC_DEVID_WANRADIO_NONE, 213 ITC_DEVID_WANRADIO_SIEMENS_MC45, 213 ITC_DEVID_WANRADIO_SIEMENS_MC46, 213 ITC_DEVID_WANRADIO_SIERRA_SB555, 213 Warm boot IOCTL_HAL_REBOOT, 219 266 IOCTL_HAL_WARMBOOT, 217 Wireless TCP/IP installations, BlockSize parameter, 204 WriteFile() DTR printing, 167, 168 IrDA printing, 162 NPCP printing, 163, 164 X Xscale processor ID, IOCTL_GET_CPU_ID, 220 700 Series Color Mobile Computer User’s Manual
PAGE 285
Index General Index Numbers 1551/1553 Tethered Scanner configuring, 177 intermec settings, 177 reset to factory defaults, 180 troubleshooting, 179 1D area imager reading distances, 173 1D laser scanner, about, 169 2D area imager reading distances, 176 2D Imager, about, 169 4820 printer, NPCP driver, 163 6804DM printer, IrDA driver, 162 6804T printer, IrDA driver, 162 6805A printer, IrDA driver, 162 6806 printer, IrDA driver, 162 6808 printer IrDA driver, 162 printer support, 161 6820 printer IrDA driver, 1
PAGE 286
Index Applets Audio, 7 backlight, 4, 10 clock, 255 intermec settings, 9, 231 beeper volume, 8 internal scanners, 171 RFID, 184 scan buttons, 182 tethered scanners, 177 vibrator, 20 phone settings CDMA radios, 123 GSM radios, 128 power battery status, 2 RAM maintenance, 3 system, wireless network, 108, 236 utilities, 231 app launch, 234 dock switch, 232 registry save, 232 wakeup mask, 233 wireless network, 235 Application keys, utilities applet app launch, 234 wakeup mask, 233 Appointments Calendar adding a
PAGE 287
Index C CAB files after the extraction, 198 creating, 188 INF files, 188 with CAB Wizard, 201 installation functions, SETUP.
PAGE 288
Index Contacts adding a note, 56 adding a telephone number CDMA radios, 121 GSM radios, 127 adding to speed dial, 59 assigning to a category, 57 changing, 56 changing options, 59 copying, 57 creating, 54, 56 deleting, 59 finding, 58 MSN Messenger managing, 75 sending messages, 76 working with, 75 Pocket Outlook, 53 sending a message, 58 Start menu icon, 27 synchronizing, 55 viewing, 55 Converting writing to text, 33 Copying, contacts, 57 Copying text, Microsoft Reader, 79 Creating a modem connection to an
PAGE 289
Index FRAME_NOT_ACKED, 165 FTP configurable parameters IDNATarget, 204 ManifestName, 205 Root, 205 heartbeat, 205 server, installing applications, 88 FTPDCMDS subdirectory, FTP support, 208 Full screen display, 202 G GDI approach, 162 Getting connected ISP, 148 to an ISP, 148 creating a modem connection, 148 to work, 151 creating a modem connection, 152 creating a VPN server connection, 154 creating a wireless network connection, 111 Windows Mobile, 103, 148 Gold plane on keypad, 223 GSM/GPRS antenna color
PAGE 290
Index IrDA printing, 162 ISP connecting to via Windows Mobile, 148 creating, a modem connection, 148 Pocket Internet Explorer, 79 Windows Mobile, 148 ITC_KEYBOARD_CHANGE, CreateEvent(), 225 ITU-T interface specifications, 143 K Keeping a to-do list, via Tasks, 60 Key clicks bar code configuration, 253, 257 configuration parameter, 253 Key sequences alpha (blue) keys alphanumeric, 13 numeric, 12 [gold] keys, numeric, 11 [gold/white] keys, alphanumeric, 12 Keyboard See also Keypad Windows Mobile input panel,
PAGE 291
Index MSN Messenger accounts Microsoft Exchange e-mail, 73 Microsoft Passport, 73 contacts managing, 75 sending messages, 76 working with, 75 setting up an account, 74 using My Text, 36 MultiMediaCards, card support, 18 N Network adapters antenna color code, 98 Ethernet communications, 109 no networking, 110 wireless 802.
PAGE 292
Index GSM radios, 125 adding contact to speed dial, 127 call history, 126 customizing phone settings, 128 finding, setting, selecting networks, 129 sending SMS messages, 127 service settings, 128 view current phone settings, 130 Phone Info Phone application, CDMA radios, 125 WAN info, GSM radios, 130 Phone jack position, utilities applet, dock switch, 232 Phone Settings applet CDMA radios, 123 customizing via Phone application CDMA radios, 123 GSM radios, 128 GSM radios, 128 network settings, GSM radios, 1
PAGE 293
Index Regulatory approvals, specifications, 23 Removing drivers DTR, 167 NPCP, 163 Removing programs, Windows Mobile, 38, 40 Replicating registry settings, 88 Reset button, 16 Reset connection settings for PCS Vision, Phone application, CDMA radios, 124 Resource kits Bluetooth, 99 data collection, 9, 157, 170, 231 device, 210, 222 printing, 162 smartsystems foundation, 94 URL, 17 RFID readers, 181 configuring, 184 intermec settings, 184 Roaming, toggle between automatic or Sprint, Phone application, CDMA r
PAGE 294
Index Synchronizing AvantGo channels, 81 Calendar, 43 contacts, 55 e-mail messages, 64 favorite links, 80 mobile favorites, 80 notes, 63 Pocket Word, 71 Tasks, 61 System, Phone application, CDMA radios, 125 T Tasks creating a task, 61 Pocket Outlook, 60 Start menu icon, 28 synchronizing, 61 TCP/IP client, DHCP server, 116 Telus activation process, 143 Testing AT commands, 144 Tethered scanner, supported symbologies, 180 Text messages, Windows Mobile, 36 Time, setting, 255 Tips for working, Pocket Excel, 72
PAGE 295
Index WAP pages, 79 connecting to an ISP, 148 Warm boot, performing, 16 Watcher applications activating, Sprint, 137 downloading, Sprint, 137 using Sprint, 139 Verizon, 135 Web browsers, FTP support, 208 Web pages, 79 connecting to an ISP, 148 WEP encryption EAP-FAST security method, 249 LEAP security method, 247 PEAP security method, 240 profile security information, 238, 239 TLS security method, 242 TTLS security method, 244 zero configuration, 112, 113 WEP keys, hex values, 236 Wi-Fi Protected Access, 2
PAGE 296
Index Files Index C CABWIZ.DDF, 201 CABWIZ.EXE, 188, 201 COREDLL.DLL, 221 D DEVICEID.H, 215 E EXITME.BIN, 208 F FTPDCE.EXE, 205, 208 AutoFTP, 210 FTP Server, 203 FTPDCE.TXT, 208 I INTERMEC.MIB, 158 ITCADC.MIB, 158 ITCSNMP.MIB, 158 ITCTERMINAL.MIB, 158 M MAKECAB.EXE, 201 N NLED.H, 221, 222 NLEDGetDeviceInfo, 221 NLEDSetDevice, 222 NPCPPORT.DLL, 163 278 O OEMIOCTL.
PAGE 297
PAGE 298
Worldwide Headquarters 6001 36th Avenue West Everett, Washington 98203 U.S.A. tel 425.348.2600 fax 425.355.9551 www.intermec.