Operation Manual

Installing Applications—Chapter 3
93700 Series Color Mobile Computer User’s Manual
Using a St orage Card to Upgrade the 700 Color Computer
To use a Secure Digital card to upgrade the 700 Color Computer, you
need a Secure Digital card reader and a Secure Digital card formatted as
FAT.
Note: The 700 Color Computer currently supports Delkin Secure Digital
cards only. Intermec cannot guarantee that other Secure Digital cards will
work with the 700 Color Computer.
1 Locate the storage card access door at the top of the 700 Color Comput-
er, remove its two screws, remove the door, then remove the storage
card. See the 700 Color with Windows Mobile 2003 Quick Start Guide
(P/N: 962-054-069) for more information.
Storage Media
Access Door
700 Color Computer
730 Computer
This illustration shows the top of the 700 Color Computer on the left and of the 730 Computer
on the right. Note that the keypad is to the bottom.
2 Place the storage card in your desktop PC card reader, then copy all re-
quired upgrade files to the storage card.
3 Remove the storage card from your card reader, reinstall it into the 700
Color Computer.
4 Press the Reset button inside the battery compartment to perform a
cold-boot. Do not use force or a sharp object when pressing the Reset
button, or you may damage the Reset button.
Reset button
This illustration shows the back of the 700 Color Computer on the left and of the 730 Computer
on the right.
5 Return the 700 Color Computer to DC power, such as installing it into
a dock connected to external power.
6 When the Bootloader Menu shows “complete,“ remove the storage card,
then press the Reset button again to load the new operating system.
Note: The upgrade will fail if the 700 Color Computer is not connected
to external power. For help, see “Accessories” on page 21.