Operation Manual

Network Support—Chapter 4
109700 Series Color Mobile Computer User’s Manual
With the NDISTRAY pop-up menu (the Network Driver Interface Speci-
fication tray application) from the System Tray, you can specify “802.11,”
“Ethernet,” or “No Networking” to load onto your 700 Color Computer
when a cold-boot is performed. When a warm boot is performed, the 700
Color Computer loads the network set just prior to the warm boot.
The 730 Computer only has the 802.11b radio and Bluetooth. It does not
have an external antenna. Other radios are not supported.
Ethernet Communications (740, 741, 750, 751, 760, 761 Computers)
Follow the steps below to start Ethernet communications on the 700 Color
Computer. If your system does not contain an 802.11b or 802. 11b/g
radio, then Ethernet networking using DHCP is selected as the default.
When “Built-in Ethernet” is selected from the NDISTRAY pop-up menu,
then the Ethernet icon shown to the left appears in the System Tray as
circled in the following illustration.