Operation Manual

Network Support—Chapter 4
113700 Series Color Mobile Computer User’s Manual
b Set Data Encryption to “Disabled.”
To Enable WEP Encryption
a Set Authentication to either “Open” if WEP keys are not required;
or “Shared” when WEP keys are required for association.
b Set Data Encryption to “WEP.”
c To change the network key, clear The Key is provided for me auto-
matically box, then enter the new Network key and select the ap-
propriate Key index.
Note: The following information applies when you have Enable Micro-
soft’s Wireless Zero Config checked via the Wireless Network applet (see
Appendix A, “Configurable Settings”).