Operation Manual

Network Support—Chapter 4
147700 Series Color Mobile Computer User’s Manual
6 Tap the Port Settings tab, check Enter dialing co mmands manually,
tap ok,thentapFinish to return to the Connections screen.
7 Tap Manage existing connections from the Connections page, press
and hold the new connection for a pop-up menu, then tap Connect to
initiate the connection.
8 Wait about ten seconds for the Network Log On screen, then tap OK.
You do not need to enter information within the Network Log On screen.
Use either the onscreen keyboard, or press the keys to type any of the AT
commands provided. Press or tap Enter to send each command. The re-
sults of each command sent will print onscreen. Note that each “AT” com-
mand must start with the “at” characters.
S To see what you typed onscreen, type “ate1” to initiate the AT Echo
command, then press Enter.