Operation Manual

6 Scanner Support—Chapter
177700 Series Color Mobile Computer User’s Manual
Tethered Scanners
The Intermec Tethered Scanner feature allows Automatic Data Collection
(ADC) by accepting data from the COM1 port and wedging it into the
keyboard interface. You can enable or disable this feature from the Today
screen on the 700 Color Computer.
Configuring the Tethered Scanner
Before you configure your tethered scanner, adjust its settings using the
Intermec Settings applet. Information about the settings you can configure
with this applet is described in the Intermec Computer Command Reference
Manual. The online manual is available from the Intermec web site at
www.intermec.com.
1 Connect your tethered scanner to the tethered scanner port.
2 From the 700 Color Computer, tap Start > Settings >theSystem tab >
the Intermec Settings icon.
3 Tap Data Collection, then tap (+) to expand Dock Tethered Scanner.