Operation Manual

Configurable SettingsAppendix —A
230 700 Series Color Mobile Computer User’s Manual
Configuration Parameters
A configuration parameter changes the way the 700 Color Computer op-
erates, such as configuring a parameter to have the 700 Color Computer
emit a very loud beep in a noisy environment.
To execute configuration parameters, scan EasySet bar codes. You can use
the EasySet bar code creation software from Intermec to print configura-
tion labels. Scan the labels to change the scanner configuration and data
transfer settings.
For more information, see the EasySet online help. EasySet is available
from the Intermec Data Capture web site.
Menus of available parameters for each group are listed. Use the scroll bars
to go through the list. Expand each menu (+) to view its parameter set-
tings. Tap a parameter to select, or expand a parameter (+) to view its sub-
parameters.
Note that each parameter or subparameter is shown with its default setting
or current setting in (< >) brackets. Tap a parameter or subparameter to
select that parameter, then do any of the following to change its setting:
S Typing a new value in an entry field.
S Choosing a new value from the drop-down list.
S Selecting a different option. The selected option contains a bullet.
S Tap Ed it > Restore Item Defaults to restore factory-default settings.
Tap Yes when you are prompted to verify this action.
S Tap View > Refresh to discard changes and start again. Tap Yes to save
changes when you are prompted to verify this action.