Operation Manual

Configurable SettingsAppendix —A
255700 Series Color Mobile Computer User’s Manual
Set Time and Date
This command sets the date and time on the 700 Color Computer. The
default date and time is June 1, 1999 at 12:00 AM.
From the network, send the following:
/+ yyyymmddhhmmss
whereacceptablevaluesforthedateare:
yyyy 0000–9999 Year
mm 01–12 M onth of the year
dd 01–31 Day of the month
hh 00–23 Hour
mm 00–59 Minutes
ss 00–59 Seconds
You can also set the time and date by using Configuration Management in
Unit Manager, or by using the Clock applet in the Settings menu. To
access this applet, tap Start > Settings >theSystem tab>theClock icon.
Configuration Bar Codes
You can change some settings on your 700 Color Computer by scanning
the f ollowing Code 39 bar code labels.
Note: When you use a bar code creation utility to make a scannable bar
code label, the utility probably adds opening and closing asterisks automat-
ically. Asterisks are included here for translation purposes.
Audio Volume
Note: The Audio Volume par ameter information is on page 253.
Turn Audio Off
*$+BV0*
*$+BV0*