User’s Manual 741 and 751 Mobile Computers (Windows Mobile 5.
Intermec Technologies Corporation Worldwide Headquarters 6001 36th Ave.W. Everett, WA 98203 U.S.A. www.intermec.com The information contained herein is provided solely for the purpose of allowing customers to operate and service Intermec-manufactured equipment and is not to be released, reproduced, or used for any other purpose without written permission of Intermec Technologies Corporation.
Contents Contents Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii Global Services and Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii Warranty Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii Web Support. . . . . . .
Contents 2 Understanding Windows Mobile 5.0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Understanding Windows Mobile 5.0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Finding Information in Windows Mobile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Learning the Basic Skills . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Using the Today Screen . .
Contents Configuring Security on the Wireless Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Choosing Between Microsoft and Funk Security . . . . . . . . . . . . . . . . . . . . . . . . . Configuring Funk Security Using Intermec Settings . . . . . . . . . . . . . . . . Configuring Funk Security Using the Profile Wizard . . . . . . . . . . . . . . . Configuring Microsoft Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Loading a Certificate . . . . . . . .
Contents vi 741 and 751 Mobile Computers (Windows Mobile 5.
Before You Begin Before You Begin This section provides you with safety information, technical support information, and sources for additional product information. Safety Information This section explains how to identify and understand cautions and notes that are in this document. A caution alerts you to an operating procedure, practice, condition, or statement that must be strictly observed to prevent equipment damage or destruction, or corruption or loss of data.
Before You Begin Telephone Support These services are available from Intermec. In the USA and Canada call 1-800-755-5505 and choose this option Services Description Order Intermec products • Place an order. • Ask about an existing order. 1 and then choose 2 Order Intermec media Order printer labels and ribbons. 1 and then choose 1 Order spare parts Order spare parts. 1 or 2 and then choose 4 Technical Support Talk to technical support about your Intermec product.
Before You Begin To order printed versions of the Intermec manuals, contact your local Intermec representative or distributor.
Before You Begin x 741 and 751 Mobile Computers (Windows Mobile 5.
1 Using the Computer This chapter introduces the 741 and 751 Color Mobile Computer with Windows Mobile 5.0. Throughout this manual, the computers are referred to as 741, 751, or computer. This chapter contains hardware and software configuration information to assist you in making the most out of your computer. 751 Color Mobile Computers with an IEEE 802.11b/g radio installed are Wi-Fi® certified for interoperability with other 802.11b/g wireless LAN devices.
Chapter 1 — Using the Computer Using the Battery The computer comes with a 14.4 Watt-hour, 7.2V, replaceable Lithium-ion (Li-ion) battery. You must fully charge the main battery before you can use the computer. When you change the main battery, a backup battery maintains your status, memory, and real-time clock for at least 10 minutes. To view the status of the battery 1 Tap Start > Settings > the System tab > Power. 2 Tap ok to exit.
Chapter 1 — Using the Computer • The battery is removed when the computer is not in suspend mode. • A cold-boot (reset) is performed on the computer. You can increase the battery runtime by turning off the computer when not in use. To turn off the computer when not in use 1 Tap Start > Settings > the Systems tab > Power. 2 Tap the Advanced tab. 3 Under On battery power, check Turn off device if not used for. 4 From the drop-down list, select the number of minutes. You can choose from 1 to 5 minutes.
Chapter 1 — Using the Computer 3 Tilt, insert, and place the battery into the compartment. Make sure the battery compartment latch clicks in place to ensure the battery is secure. Battery compartment latch Battery compartment Battery pack 4 Insert your 741 or 751 into its single dock for charging. 5 Charge the battery pack for three hours before using. You must use only the Intermec power supply approved for use with the computer. Using any other power supply will damage the computer.
Chapter 1 — Using the Computer 2 Pull up on the battery compartment latch, and then lift the battery out of the battery compartment. Battery compartment latch Battery compartment Battery pack Understanding the Ambient Light Sensor The ambient light sensor turns on the display lighting when conditions warrant but automatically turns it off again as surrounding light increases. The sensor helps conserves your battery power.
Chapter 1 — Using the Computer 3 Make your selections, and then tap OK to exit. Understanding the Audio System The audio system consists of the speaker, internal microphone, and the external headset jack. Locating the Speaker The speaker, which is capable of variable volume levels, is located on the back of the 741 and 751. This speaker has a transducer volume of 85 dB min at 10 cm (3.9 in) and a frequency range of 1 to 8 KHz.
Chapter 1 — Using the Computer Locating the External Headset Jack The external headset jack connects a mobile phone style headset to the computer for use in noisy environments. The jack is a 2.5 mm, threeconductor jack. When you insert a headset into the external jack, the internal speaker and microphone are disabled. The external headset jack is located on the bottom of the computer next to the Hirose docking connector.
Chapter 1 — Using the Computer 3 Tap Low, Medium, High, or Very high and save your changes. The computer has a built-in vibrate feature that enables you to receive scanner feedback despite the noise level. When enabled, the computer vibrates when the scanner performs a good read. To enable the vibrate feature 1 Tap Start > Settings > the System tab > Intermec Settings. 2 Tap Device Settings > Good Read > Internal Scanner > Beep or Vibrate > Vibrate. 8 741 and 751 Mobile Computers (Windows Mobile 5.
Chapter 1 — Using the Computer Using the Keypad Your 741 and 751 mobile computer has one of the following keypad options: • 22-key numeric keypad • 39-key alphanumeric keypad Navigation keys On/Off key Gold, Gold/White Plane key Numeric keypad Alpha key Alphanumeric keypad Use the following sections to understand how to use the keypad. For information on remapping the keypad, you can download the Device IDL Resource Kit from the Intermec web site at www.intermec.com/idl.
Chapter 1 — Using the Computer Entering Key Sequences Use the following key sequences to enter characters into your computer using the numeric keypad. Using Orange or Orange/White Plane Keys The orange plane key (numeric keypad) or the orange/white plane key (alphanumeric keypad) provides you access to display controls, special characters, and Windows Mobile options. Press the orange ( ) or the orange/white (c) plane key for each orange key stroke you wish to make.
Chapter 1 — Using the Computer The following table lists sequences that use the orange/white (c) plane key. See “Understanding Windows Mobile” on page 19 for information about the Windows Mobile applications. Orange/White Plane Key Sequences Press the Keys To Do This cI Toggle the backlight on or off. You can also go through the backlight power levels by holding the keys down. cA Launch a Windows Mobile application or custom application. cB Launch a Windows Mobile application or custom application.
Chapter 1 — Using the Computer Green Plane Key Sequences Using the Alpha Plane Keys When you press d, the Scanning/Alpha LED ( ) is red to indicate Alpha mode on the alphanumeric keypad. The keypad stays in Alpha mode until you press d again. If you want to type a lowercase c, press d C. If you want to type an uppercase C, press and hold the g key and then press C. Press b to enter a space.
Chapter 1 — Using the Computer Alpha Plane Key Sequences (continued) To Enter Press These Keys To Enter Press These Keys e dE E dgE f dF F dgF g dG G dgG h dH H dgH i dI I dgI j dJ J dgJ k dK K dgK l dL L dgL m dM M dgM n dN N dgN o dO O dgO p dP P dgP q dQ Q dgQ r dR R dgR s dS S dgS t dT T dgT u dU U dgU v dV V dgV w dW W dgW x dX X dgX y dY Y dgY z dZ Z dgZ Using the Touch Screen The computer has a color touch sc
Chapter 1 — Using the Computer See Chapter 2, “Understanding Windows Mobile” for more information on using Windows Mobile. If you have TE 2000 loaded on your computer, you will not see the Today screen. After the computer finishes the initial booting sequence, the TE 2000 screen appears. For help using TE 2000 terminal emulation, see the TE 2000 Terminal Emulation Programmer’s Guide (P/N 977-055-xxx).
Chapter 1 — Using the Computer Aligning the Touch Screen If the touch screen does not respond when you tap it with the stylus, you may need to calibrate the screen. To calibrate the touch screen 1 Tap Start > Settings > the Systems tab > Screen. 2 Tap Align Screen and follow the instructions to align the screen. If the touch screen is so out of alignment that you cannot open the Start menu, you may need to perform a clean boot. After the computer clean boots, it prompts you to align the screen.
Chapter 1 — Using the Computer Scanning/Keypad Shift and Notification LED LED Color and Action Description Momentary green Indicates a good scan. Blinking green Indicates the scanner is initializing. Steady red Indicates the keypad is shifted to Alpha (green) and the computer is turned on. Yellow When the keypad is in alpha mode, the LED temporarily switches from red to yellow to indicate a good scan. The yellow LED also indicates a Calendar or Task activity.
Chapter 1 — Using the Computer To scan bar code labels with the laser scanner or linear imager 1 Press I/O to turn on the computer. 2 Point the scanner window at the bar code label and hold the computer at a slight angle 15 to 25 cm (6 to 10 in) from the label. 3 Press either side Scan button, or pull the trigger on a handle, and direct the red beam so that it falls across all bars in the bar code label.
Chapter 1 — Using the Computer To scan a bar code label with the area imager 1 Press I/O to turn on the computer. 2 Point the scanner window at the bar code label and hold the computer steady a few inches from the label. 3 Press one of the side Scan buttons, or pull the trigger on a handle, and center the red aiming beam over the bar code label. The imager flashes repeatedly while it is trying to read a bar code.
Chapter 1 — Using the Computer You can use the following scanner models with the tethered scanner adapter: • 1551E • 1553E • ASCII • SR60 For information on configuring the tethered scanner, see the documentation that came with the scanner. You can also attach Bluetooth scanners, such as the SF51 and the SR61, to the computer. For more information, see “Configuring the Computer to Communicate With a Wireless Scanner” on page 41.
Chapter 1 — Using the Computer Attaching a Tab to the SD Card The SD card, as ordered from Intermec, come with acrylic adhesive pull tabs. If you are using a storage card that you plan to remove from the computer, this tab can make its removal easier. Do the following to attach the tab to your storage card. Note that the pull tab has divots cut into either side, towards the shorter end. Use these divots as a guide. To attach a tab to the SD card 1 Completely peel the paper off the short end of the tab.
Chapter 1 — Using the Computer Removing the SD Card 1 Press and hold the Power key for a few seconds, and then release the Power key to turn off the computer. Remove the storage media access door. 2 Gently press the SD card to release the card, and then pull the card out of the computer. 3 Replace the storage media access door. 4 Press the Power key for two to three seconds, and then release the Power key to turn on the computer. 741 and 751 Mobile Computers (Windows Mobile 5.
Chapter 1 — Using the Computer 22 741 and 751 Mobile Computers (Windows Mobile 5.
2 Understanding Windows Mobile 5.0 This chapter introduces Microsoft Windows Mobile 5.0 for Pocket PC. In this chapter you will find these sections: • Understanding Windows Mobile 5.0 • Finding Information in Windows Mobile • Learning the Basic Skills • Using Microsoft ActiveSync • Using Internet Explorer Mobile 741 and 751 Color Mobile Computer (Windows Mobile 5.
Chapter 2 — Understanding Windows Mobile 5.0 Understanding Windows Mobile 5.0 This chapter introduces Microsoft Windows Mobile 5.0. While using the computer, keep these key points in mind: • Tap Start on the navigation bar, located at the top of the screen, to quickly move to programs, files, and settings. Use the command bar at the bottom of the screen to perform tasks in programs. The command bar includes menus, icons, and the onscreen keyboard.
Chapter 2 — Understanding Windows Mobile 5.0 • http://msdn.microsoft.com/newsgroups/ And, most importantly, the Intermec front-line support personnel can help assist you work with many of the Windows Mobile and technologies that you find on the computer. See “Global Services and Support” on page vi for more information. Learning the Basic Skills Learning to use the computer is easy. This section describes the basic concepts of using and customizing your computer.
Chapter 2 — Understanding Windows Mobile 5.0 To access programs • Tap Start > Programs and then tap the program name. The following list contains some of the programs on your computer. Look on the Windows Mobile Companion CD for additional programs that you can install onto your computer. • ActiveSync • Excel Mobile • PowerPoint Mobile • Word Mobile Using the Navigation Bar and the Command Bar The navigation bar is located at the top of the screen.
Chapter 2 — Understanding Windows Mobile 5.0 Using Pop-Up Menus Use pop-up menus to quickly perform an action on an item. For example, you can use a pop-up menu to delete or make a copy of an item. To access a pop-up menu, tap and hold the item on which you want to perform the action. When the menu appears, tap the action you want to perform, or tap anywhere outside the menu to close the menu without performing the action.
Chapter 2 — Understanding Windows Mobile 5.0 To change word suggestion options, such as the number of words suggested at one time, tap Start > Settings > the Personal tab > Input > the Word Completion tab. Typing With the Onscreen Keyboard Tap the input panel arrow, and then tap Keyboard. On the soft keyboard that displays, tap the keys with your stylus. • To type lowercase letters, tap the keys with the stylus. • To type a single uppercase letter or symbol, tap the Shift key.
Chapter 2 — Understanding Windows Mobile 5.0 Using Transcriber With Transcriber, you can write anywhere on the screen using the stylus just as you would on paper. Unlike Letter Recognizer and Clock Recognizer, you can write an entire sentence of information. To use Transcriber 1 Tap the input panel arrow and then tap Transcriber. 2 Tap ok. 3 Write anywhere on the screen. Pause and let Transcriber change the written characters into typed characters.
Chapter 2 — Understanding Windows Mobile 5.0 2 Tap Menu > Tools > Recognize. Your writing is converted to text. Notifications When you have something to do, your computer can notify you in a variety of ways. For example, if you have set up an appointment in Calendar, you can be notified in any of the following ways: • A message box appears on the screen. • A sound, which you can specify, plays. • A light flashes on your computer. • The computer vibrates.
Chapter 2 — Understanding Windows Mobile 5.0 To choose how you are notified 1 Tap Start > Settings > Sounds & Notifications > the Notifications tab. 2 Choose your settings and then click ok. Finding and Organizing Information You can use File Explorer to find files on your computer and organize these files into folders. To open File Explorer • Tap Start > Programs > File Explorer. Once you open File Explorer, it becomes available from Start menu. 741 and 751 Color Mobile Computer (Windows Mobile 5.
Chapter 2 — Understanding Windows Mobile 5.0 Customizing the Computer You can customize your computer by adjusting settings and by adding or removing programs. Adjusting Settings You can adjust the computer settings to suit the way you work. To view the Settings options • Tap Start > Settings > either the Personal tab or the System tab. You might want to adjust settings on the following screens.
Chapter 2 — Understanding Windows Mobile 5.0 You can install any program created for the 741 or 751 mobile computer, as long as there is enough memory. A popular place to find software for your computer is on the Windows Mobile Web site (www.microsoft.com/ windowsmobile/resources/communities/default.mspx). Using Microsoft ActiveSync Use Microsoft ActiveSync to synchronize the information on your desktop with the information on the computer.
Chapter 2 — Understanding Windows Mobile 5.0 To open ActiveSync on your computer • Tap Start > Programs > ActiveSync. ActiveSync opens and shows you the synchronization status. For more information about ActiveSync on your computer, open ActiveSync and tap Start > Help. Using Internet Explorer Mobile You can use Internet Explorer Mobile to run web-based applications, and view pages downloaded to the computer. You can also connect to the Internet through an ISP or a network connection and browse the Web.
Chapter 2 — Understanding Windows Mobile 5.0 Default Internet Explorer Web Page 741 and 751 Color Mobile Computer (Windows Mobile 5.
Chapter 2 — Understanding Windows Mobile 5.0 36 741 and 751 Color Mobile Computer (Windows Mobile 5.
3 Configuring the Computer Use this chapter to understand how to configure the 741 and 751 to communicate in your network. In this chapter, you will find these sections: • Configuring the Computer Operating Parameters • Configuring Personal Area Networks • Configuring Local Area Networks • Configuring Security 741 and 751 Mobile Computers (Windows Mobile 5.
Chapter 3 — Configuring the Computer Configuring the Computer Parameters You can configure many parameters on the computer, such as the bar code symbologies it decodes or the network settings. These characteristics are controlled by configuration parameters. The values you set for these configuration parameters determine how the computer operates. Use configuration commands to configure the 741 and 751.
Chapter 3 — Configuring the Computer Remotely Configuring the Computer Using SmartSystems Foundation The SmartSystems™ server lets you manage all of your SmartSystemsenabled devices at the same time from a central host PC. The mobile computer ships with the SmartSystems client, which means it is SmartSystems enabled. The SmartSystems server has a console that displays all of the computers in your network. In the console, you can right-click a computer and a menu appears.
Chapter 3 — Configuring the Computer • Connect to a Bluetooth scanner The Bluetooth radio is disabled by default. You must turn on the Bluetooth radio before you can discover and connect to other remote devices. To turn the Bluetooth radio on 1 Tap Start > Settings > the Connections tab > Bluetooth. 2 Tap Turn on Bluetooth. 3 (Optional) Tap Make this device visible to other devices if you want your computer to be discoverable by other Bluetooth devices. 4 Click ok.
Chapter 3 — Configuring the Computer Configuring the Computer to Communicate With a Wireless Scanner This section explains how to configure the computer to communicate with Bluetooth wireless scanners. The computer ships with a Bluetooth association label attached to the left side. Scan the association label to quickly connect the computer to the Bluetooth wireless scanner, such as the SF51 or SR61.
Chapter 3 — Configuring the Computer 9 Refresh Intermec Settings to see the Bluetooth scanner under Data Collection. You can now view and modify any symbology settings. To remove a wireless scanner from the computer 1 Select Start > Settings > the System tab > Bluetooth Scanner Wizard. 2 Tap Remove Device. 3 Select the Bluetooth scanner from the DCE Device(s) list that you want to disconnect and then tap Disconnect. The scanner you wanted to remove no longer appears in the list. 4 Tap Finish.
Chapter 3 — Configuring the Computer Specifically, the current wireless printer is registered and deregistered on Bluetooth stack load/unload. If you select a different current wireless printer, the existing wireless printing COM port is deregistered and the new one is registered instead. The Wireless Printing application uses the Bluetooth COM Port Control to handle COM port registration/ deregistration.
Chapter 3 — Configuring the Computer To manually enter the device address of the printer 1 Select Start > Settings > the Systems tab > Wireless Printing. The Wireless Printing wizard appears. 2 Tap Manual. The wizard advances to the next screen where you enter the device address. 3 Type the address of the printer in the Enter Device Address text box and then tap OK. The keyword -unknown- appears in the Device Name field in the Current Wireless Printer box.
Chapter 3 — Configuring the Computer Configuring USB Communications You can place your computer in a single dock, multidock, modem dock, or vehicle dock to transfer data to and receive data from another device using USB communications. The USB cable and all of the docks are sold separately. For information on accessories and how to order them, see “Accessories” on page 93. To use USB communications with your computer 1 Connect the dock to the USB port of the other device using an appropriate USB cable.
Chapter 3 — Configuring the Computer Configuring 802.11 Radio Communications The 751 Mobile Computer has an internal 802.11 b/g radio to transfer data using wireless communications. This section of the manual assumes that you have already set up your wireless communications network including your access points. If you are using a UDP Plus network, have your Intermec Application Server communicate with a host computer.
Chapter 3 — Configuring the Computer • Controller IP address • IP settings (if not using DHCP) • Network port 3 Make sure the 751 is talking to the network and that the network can see the 751. 4 Configure security. For help, see “Configuring Security on the Wireless Network” on this page. Checking the Status of Your Wireless Connection After you configure your wireless settings, you can use iConnect to check the status of your connection.
Chapter 3 — Configuring the Computer There are many schemes available to implement these features. Use the following tables to understand the common terminology for wireless network security. Encryption Terminology Acronym Description AES A block cipher, a type of symmetric key cipher that uses groups of (Advanced Encryption bits of a fixed length - called blocks. A symmetric key cipher is a Standard) cipher using the same key for both encryption and decryption.
Chapter 3 — Configuring the Computer Authentication Terminology Acronym Description EAP (Extensible Authentication Protocol) 802.11b/g uses this protocol to perform authentication. This is not necessarily an authentication mechanism, but is a common framework for transporting actual authentication protocols. Intermec provides a number of EAP protocols for you to choose the best for your network. EAP-FAST (Flexible Authentication via Secure Tunneling) A publicly accessible IEEE 802.
Chapter 3 — Configuring the Computer Choosing Between Microsoft and Funk Security Before you can implement a security solution on the 751, you need to choose between Microsoft and Funk security: • By default, Funk security is enabled. It provides everything you get with Microsoft security plus the addition of Cisco Compatible Extensions features. It also provides additional authentication types like EAPTTLS, LEAP, and EAP-FAST.
Chapter 3 — Configuring the Computer Configuring WPA Security With Funk Security Use these procedures to set WPA-802.1x, WPA2-802.1x, WPA-PSK, or WPA2-PSK security on your 751 with Funk security. To configure WPA-802.1x or WPA2-802.1x with Funk security 1 Make sure you have configured the communications and radio parameters on your 751. 2 Make sure you have selected Funk as your security choice. 3 Open Intermec Settings. 4 Choose Communications > 802.11 Radio > Funk Security > Profile.
Chapter 3 — Configuring the Computer 5 For Association, choose WPA or WPA2. 6 For 8021x, choose None. 7 For Pre-Shared Key, enter the pre-shared key or the passphrase. The pre-shared key must be a value of 32 hex pairs preceded by 0x for a total of 66 characters. The value must match the key value on the access point. The passphrase must be from 8 to 63 characters. After you enter a passphrase, the 751 internally converts it to a pre-shared key. This value must match the passphrase on the authenticator.
Chapter 3 — Configuring the Computer Configuring LEAP Security on the 751 1 Make sure you have selected Funk as your security choice. 2 Make sure you have configured the communications and radio parameters on your 751. 3 From Intermec Settings, choose Communications > 802.11 Radio > Funk Security > Profile. 4 For 8021x, choose LEAP. 5 For Association, choose Open, WPA, WPA2, or Network EAP.
Chapter 3 — Configuring the Computer To select a profile for Funk security 1 Select Start > Settings > the Systems tab > Wireless Network. or Tap the iConnect icon ( ) in the lower right corner of the Today screen and select Tools > Wireless Settings. The Profile Wizard appears. 2 From the Profile list, select the profile you want to configure. 3 Tap Edit Selected Profile. 4 (Optional) Give your profile a meaningful name by selecting the text in the Profile Label text box and typing a meaningful name.
Chapter 3 — Configuring the Computer 5 From the Data TX Key list, select the key you want to use for transmitting data. 6 Define a value for the keys you want to use. You can define up to four keys (Key 1 through Key 4). Enter an ASCII key or a hex key that is either 5 bytes or 13 bytes long depending on the capability of the radio. Set a 5-byte value for 64-bit WEP or a 13-byte value for 128-bit WEP. Hex keys must be preceded by 0x and contain 5 or 13 hex pairs. 7 Tap OK.
Chapter 3 — Configuring the Computer 5 Tap OK. Configuring WPA2-PSK Security With Profile Wizard 1 In the Profile Wizard, select the Security page. 2 For 8021x Security, choose None. 3 For Association, choose WPA2. 4 For Encryption, choose TKIP or AES. 5 For Pre-Shared Key field, enter the passphrase as ASCII (12345). 6 Tap OK. Configuring PEAP Security With Profile Wizard Protected EAP (PEAP) performs secure authentication against Windows domains and directory services.
Chapter 3 — Configuring the Computer 3 For Association, choose Open, WPA, WPA2, or Network EAP. 4 For Encryption, choose TKIP or AES if you selected WPA2 for association, or WEP or CKIP if you selected Network EAP for association. 5 For Username, type a unique username for this protocol. 6 In the Password field, type a unique password for this protocol.
Chapter 3 — Configuring the Computer 3 For Association, choose Open, WPA, WPA2, or Network EAP. 4 For Encryption, choose TKIP or AES if you selected WPA2 for association, or WEP or CKIP if you selected Network EAP for association. 5 For Subject Name, type a unique subject name for this protocol. 6 For User Name, type a unique user name for this protocol. 7 Tap Get Certificates to obtain or import server certificates. For help with certificates, see “Loading a Certificate” on page 64.
Chapter 3 — Configuring the Computer 3 For Association, choose Open, WPA, WPA2, or Network EAP. 4 For Encryption, choose TKIP or AES if you selected WPA2 for association, or WEP or CKIP if you selected Network EAP for association. 5 For Username, type a unique username for this protocol. 6 In the Password field, type a unique password for this protocol.
Chapter 3 — Configuring the Computer To configure LEAP security 1 In the Profile Wizard, select the Security page. 2 For 8021x Security, choose LEAP. 3 For Association, choose Open, WPA, WPA2, or Network EAP. 4 For Encryption, choose TKIP or AES if you selected WPA2 for association, or WEP or CKIP if you selected Network EAP for association. 5 For Username, type a unique username for this protocol. 6 In the Password field, type a unique password for this protocol.
Chapter 3 — Configuring the Computer 3 For Association, choose Open, WPA, WPA2, or Network EAP. 4 For Encryption, choose WEP or CKIP if you selected Network EAP for association. 5 For Username, type a unique username for this protocol. 6 In the Password field, type a unique password for this protocol. 7 Select Prompt for password to have the user enter this password each time to access the protocol, or select Use following password to use the protocol without entering a password each time you use the 751.
Chapter 3 — Configuring the Computer • Prompt before replacing a PAC for notification whether to replace a current PAC with an incoming PAC. 12 For Anonymous EAP-FAST Name, type the outer identity assigned for public usage. 13 Tap OK. Configuring Microsoft Security The default security setting is Funk. If you want to use Microsoft security, you need to select it as your security choice.
Chapter 3 — Configuring the Computer 2 Enter a Network name. If the network was detected, the network name is entered and cannot be changed. 3 From the Connects to list, select where you want your network to connect: • If you select Work, you can create a VPN connection or use proxy servers. • If you select The Internet, you can connect directly to the internet. 4 (Optional) To connect to an ad-hoc connection, select This is a deviceto-device (ad-hoc) connection. 5 Tap Next.
Chapter 3 — Configuring the Computer c Enter the new Network key. 7 Tap Next. 8 From the EAP type list, select either PEAP or Smart Card or Certificate and then tap Finish. 9 From the Networks to access list, select All Available, Only access points, or Only computer-to-computer. 10 Tap ok to close the screen. Note: If you select to automatically connect to non-preferred networks, the 751 detects any new networks and provides you with the opportunity to configure them.
Chapter 3 — Configuring the Computer To import a user certificate from an IAS server 1 Tap Web Enrollment. 2 Enter the User, Password, and Server (IP address) to log into the server. 3 Tap OK. A dialog box appears asking if you want to load the root certificate. 4 Tap OK for yes. The Enrollment Tool message box appears telling you that the certificate has been added. 5 Tap OK to close the message box.
Chapter 3 — Configuring the Computer 66 741 and 751 Mobile Computers (Windows Mobile 5.
4 Developing and Installing Applications Use this chapter to understand the guidelines for developing applications for use on the computer. This chapter contains these sections: • Developing Applications for the Computer • Installing Applications on the Computer • Freeing Up Virtual Memory for Applications • Launching an Application Automatically • Upgrading the System Software 741 and 751 Mobile Computers (Windows Mobile 5.
Chapter 4 — Developing and Installing Applications Developing Applications for the Computer The 741 and 751 mobile computers run applications programmed in Microsoft Visual Studio 2005. You can also use Microsoft eMbedded Visual C++ 4.0, but some features may not be available.
Chapter 4 — Developing and Installing Applications • If you have a simple application, you may only need to deliver the .exe file. • You can copy a directory structure that contains the application, supporting files, DLLs, images, and data files. Intermec recommends using .cab files to install your applications. The mobile computer uses standard Windows Mobile .cab files and will install third-party .cab files. You can have your .
Chapter 4 — Developing and Installing Applications Installing Applications Using SmartSystems Server You can use the SmartSystems server to drag-and-drop Intermec applications onto your mobile computers. The computer ships with the SmartSystems client, which means it is SmartSystems-enabled. The console is part of SmartSystems Foundation, which you can download from www.intermec.com/SmartSystems. For help using the console, see the online help.
Chapter 4 — Developing and Installing Applications 3 Click Explore to open the Mobile Device window that shows the files and folders on the mobile computer. 4 On your desktop PC, locate the .cab file you want to download to the mobile computer and copy it. 5 From the Mobile Device window, open the My Windows MobileBased Device folder and navigate to the folder where you want to paste the .cab file. 6 Paste the .cab file into the desired folder.
Chapter 4 — Developing and Installing Applications Installing Applications Using the FTP Server The computer has a built-in FTP server that connects to a network through the 802.11 b/g radio. You can use the server to transfer your application file to the computer. Another benefit of using the FTP server is that you can create FTP scripts to automate the process of copying your files to the computer. This option is useful when you need to send files to a large number of computers.
Chapter 4 — Developing and Installing Applications InstallSelect manages the installation of value-added software features of the computer. Removing software features may result in loss of computer functionality or the ability to manage device settings. See “Understanding the InstallSelect Software Components” on page 74 or contact your Intermec service representative for information about each software feature before making changes.
Chapter 4 — Developing and Installing Applications 7 Tap Yes to continue with the clean boot. The computer performs a clean boot and restarts with all of the checked components installed. Understanding the InstallSelect Software Components Component Name Description Data Collection & Intermec Settings Data collection and Intermec Settings. Also includes on-unit SDK libraries. If you disable this CAB file, you cannot scan or collect data on the device and you cannot use Intermec Settings.
Chapter 4 — Developing and Installing Applications AutoRun handles quoted file names for the first parameter, which allows you to specify path names or file names that contain white spaces. AutoRun only supports one set of quotes per command. Upgrading the System Software When you upgrade your computer, you are updating the operating system (OS) and the Persistent Storage Manager (PSM) files.
Chapter 4 — Developing and Installing Applications Storage Media Access Door This shows the top of the computer. Note the keypad is facing downward. 2 Place the storage card in your desktop PC card reader, and then copy all required upgrade files to the SD card. 3 Remove the SD card from your card reader and reinstall it in the computer. 4 Press the Reset button inside the battery compartment to perform a cold boot.
Chapter 4 — Developing and Installing Applications • the device upgrade .exe file. This file is available from the Intermec web site at www.intermec.com. Go to Support > Downloads. Make sure the file you select is for your language. To upgrade the computer using SmartSystems console 1 Install SmartSystems Foundation on your PC and open the SmartSystems console. 2 Make sure the SmartSystems console and the computers are on the same subnet.
Chapter 4 — Developing and Installing Applications 78 741 and 751 Mobile Computers (Windows Mobile 5.
5 Troubleshooting and Maintaining the Computer If you encounter any problems while using the mobile computer, look in this chapter to find a possible solution. You will also find information on routine maintenance. This chapter contains these sections: • Calling Product Support • Troubleshooting the Computer • Resetting Your Computer • Cleaning the Scanner Window 741 and 751 Color Mobile Computers (Windows Mobile 5.
Chapter 5 — Troubleshooting and Maintaining the Computer Calling Product Support If you cannot find the answer to your problem in the “Troubleshooting the Computer” section, you can visit the Intermec technical knowledge base (Knowledge Central) at intermec.custhelp.com to review technical information or to request technical support. If you still need help after visiting Knowledge Central, you may need to call Product Support.
Chapter 5 — Troubleshooting and Maintaining the Computer Troubleshooting Your Computer If you send the computer in for service, it is your responsibility to save the computer data and configuration. Intermec is responsible only for ensuring that the hardware matches the original configuration when repairing or replacing the computer. Problems While Operating the Computer Problem Solution You press the power key to turn on • Make sure the backlight is on.
Chapter 5 — Troubleshooting and Maintaining the Computer Problems With Wireless Connectivity Problem Solution When you turn on the computer after it was suspended for a while (10-15 minutes or longer), it can no longer send or receive messages over the network. Host may have deactivated or lost current terminal emulation session. In a TCP/IP direct connect network, turn off the “Keep Alive” message from host to maintain the TCP session while the computer is suspended.
Chapter 5 — Troubleshooting and Maintaining the Computer Problems While Configuring 802.1x Security (continued) Problem Solution The 751 indicates it is not authenticated. Make sure that: • the User Name and Password parameters on the 751 must match the user name and password on authentication server. You may need to reenter the password on both the 751, authentication server. • on your authentication server, the user and group are allowed and the group policy is allowed to log into the server.
Chapter 5 — Troubleshooting and Maintaining the Computer Problems While Scanning Bar Codes (continued) Problem Solution The input device attached to the Set the Scanner Model command to the specific computer does not work well or read attached input device. Check enabled bar code bar code labels very quickly. symbologies and enable only the symbologies being used. The scanner will not read the bar code label. • Aim the scanner beam to cross entire bar code label in one pass. Vary the scanning angle.
Chapter 5 — Troubleshooting and Maintaining the Computer To warm boot the computer • Press and hold the Power key for ten seconds. The computer systematically shuts down, restarts, and goes through the initialization process. Cold Booting the Computer In some cases where the computer completely stops responding, it may be necessary to perform a cold boot. Because cold booting may result in data loss, only use this method if all other recovery methods have failed.
Chapter 5 — Troubleshooting and Maintaining the Computer To clean boot the computer 1 Press the Power key to turn off the computer. 2 Release the lower clip of the hand strap and remove the battery pack. 3 Press the Reset button and then reinstall the battery pack. 4 Press and hold the Power key until the computer starts the boot sequence and you see a warning message asking if you want to clean boot the system. 5 Press the right side button to start the clean boot process.
A Specifications 741 and 751 Mobile Computer (Windows Mobile 5.
Appendix A — Specifications Physical and Environmental Specifications Use these specifications to locate technical information about the 741 and 751 and their available features and options. Display 1/4 VGA Transflective, software-controlled backlight Pixels: 240x320 Diagonal: 97 mm (3.
Appendix A — Specifications Power Battery Type: Battery Capacity: Battery Life: Recharging Time: Charging Range: Lithium-Ion (Li-ion), 7.2V, (2 x 2000 mAh cells), customer-replaceable 14.4 Watt-hours 8 to 12 hours, application-dependent 4 hours 0° to 40°C (32° to 104°F) Regulator Approvals UL and cUL Listed, UL 60950 and UL 1604 and CSA 22.2 #157, FCC Part 15, TUV, CE mark Standard Communications RS-232, USB, IrDA 1.
Appendix A — Specifications If you are using the linear imager, the standard range laser, or the long range laser, the computers support these bar code symbologies: Supported Symbologies • Codabar • Micro PDF417 • Codablock A • MSI • Codablock F • PDF417 • Code 11 • Plessey • Code 2 of 5 • RSS 14 • Code 39 • RSS Limited • Code 128 • RSS Expanded • EAN.
Appendix A — Specifications 0" 4" 8" 12" 16" in 10" 25 8" 20 Data Matrix 7.5 mils 6" 15 PDF417 6.6 mils 4" 10 2" 5 0" 0 2" 5 4" 10 0.125mm / 5mils 6" 15 0.25 mm / 10 mils 20 8" 100% contrast UPC EAN 10" 25 0.5 mm / 20 mils cm 0 10 20 30 40 50 EA11 Standard Minimum Reading Distances With 0.04 Inch Setbacks EL10 Minimum Guaranteed Reading Distances With 0.25 Inch Setbacks Symbology Density Minimum Distance Maximum Distance Code 39 0.10 mm (4 mils) 0.125 mm (5 mils) 0.
Appendix A — Specifications 0" 4" 8" 12" 16" 20" 24" 28" in 14" 35 100% contrast UPC/ EAN 12" 30 10" 25 PDF417 6.6 mils 8" 20 6" 15 4" 10 2" 5 0 0 2" 5 4" 10 15 6" 0.125 mm / 5 mils 20 8" 0.25 mm / 10 mils 25 10" 0.5 mm / 20 mils 12" 30 1 mm / 40 mils 14" 35 cm 0 10 20 30 40 50 60 70 EL10 Minimum Guaranteed Reading Distances With 0.25 Inch Setbacks EV10 Minimum Reading Distances With 0.
Appendix A — Specifications EV10 Minimum Reading Distances With 0.04 Inch Setbacks Accessories The following accessories are available for the 741 and 751. Note that this is not a complete list. Contact your local Intermec service representative for information about these and other accessories that are not in this list. Accessory Description Part Number AA8 Snap-on modem 225-687-002 AA9 DEX adapter 225-686-001 AA10 Long range tethered scanning adapter (3.
Appendix A — Specifications 94 741 and 751 Mobile Computer (Windows Mobile 5.
I Index 741 and 751 Mobile Computer (Windows Mobile 5.
Index Numerics 802.11 radio communications, configuring, 46 802.
Index cold booting, 85 COM port, for Bluetooth wireless printing, 42 command bar, using, 26 communications 802.11 radio, configuring, 46 Ethernet, configuring, 45 options, 89 USB, configuring, 45 CompactFlash cards, installing, 19 computer shutdown, 2 stops responding, troubleshooting, 85 turning off, 3 volume, adjusting, 7 configuration number, finding on your computer, 80 configuring 802.11 radio communications, 46 802.
Index navigating within, 38 using to configure computer, 38 using to connect a wireless scanner, 41 Internal scanners, specifications, 88 Internet Explorer Mobile, using, 34 using to find OS version, 80 IVA functionality, description, 75 Funk security configuring 802.
Index O Object Store, storing applications, 69 onscreen keyboard, typing with, 28 operating system finding version, 80 how to upgrade, 75 specifications, 88 operating temperature, 88 orange plane keys, using, 10 orange/white plane keys, using, 10 organizing information with File Explorer, 31 P parameters, configuring, 38 passphrase, setting for Funk WPA-PSK, 52 PEAP security, configuring with Profile Wizard, 56 performing a cold boot, 85 persistent storage manager, how to upgrade, 75 personal area networ
Index settings adjusting Windows Mobile, 32 configuring with Intermec Settings, 38 SF51, connecting to, 41 SmartSystems upgrading computer, 76 using to configure computer, 39 using to install applications, 70 SmartSystems Client & Intermec Settings, InstallSelect component, 74 SmartSystems Console using to install applications, 70 using to upgrade the computer, 76 SmartSystems Foundation described, 70 downloading, 70 speaker icon, using to adjust volume, 7 locating, 6 specifications, 88 bar code symbologie
Index Windows Mobile ActiveSync, 33 Block Recognizer, 28 command bar, using, 26 entering information, 27 File Explorer, using, 31 Internet Explorer, 34 navigation bar, 26 pop-up menu, using, 27 switching programs, 25 Today screen, using, 25 Transcriber, using, 29 web site, 33 wireless connection checking status, 47 troubleshooting, 82 wireless network security, configuring, 47 specifications, 88 terminology, 48 wireless options, 88 wireless printing choosing the printer from a list, 44 configuring Bluetoot
Index 102 741 and 751 Mobile Computer (Windows Mobile 5.
Corporate Headquarters 6001 36th Avenue West Everett, Washington 98203 U.S.A. tel 425.348.2600 fax 425.355.9551 www.intermec.com 741 and 751 Mobile Computer (Windows Mobile 5.
