Operation Manual

Chapter 3 — Configuring the Computer
42 741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual
9 Refresh Intermec Settings to see the Bluetooth scanner under Data
Collection. You can now view and modify any symbology settings.
To remove a wireless scanner from the computer
1 Select Start > Settings > the System tab > Bluetooth Scanner Wizard.
2 Tap Remove Device.
3 Select the Bluetooth scanner from the DCE Device(s) list that you want
to disconnect and then tap Disconnect.
The scanner you wanted to remove no longer appears in the list.
4 Tap Finish.
Configuring Bluetooth Communications for Wireless Printing
This section explains how to configure the computer for Bluetooth wireless
printing. You need to:
• make sure Bluetooth power is on. For help, see the procedure in
“Configuring Personal Area Networks” on page 39.
• create an application that lets you print. For help, see the next section.
• select the current wireless printer on the computer. For help, see
“Selecting the Current Wireless Printer on the Computer” on page 43.
Creating an Application That Lets You Print Wirelessly
The computer does not ship with an application that lets you print
wirelessly. You must create an application that opens the wireless printing
COM port on the computer. For help, see the Bluetooth Resource Kit.
The Wireless Printing application is available from Start > Settings > the
System tab. The application separates the task of wireless printing setup
from other Bluetooth management tasks.
The Wireless Printing application uses the concept of a “current wireless
printer.” The computer connects to the current wireless printer when your
application opens the wireless printing COM port on your computer. If
there is no current wireless printer selected on your computer, there is no
wireless printing COM port registered on your computer. You must select a
current wireless printer as described in the next section.
The Wireless Printing application performs these tasks on the computer:
• Helps you select the current wireless printer
• Stores the current wireless printer in the registry
• Registers/deregisters the wireless printing COM port
• Stores the wireless printing COM port in the registry as the WPort