Operation Manual

Chapter 3 — Configuring the Computer
54 741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual
To select a profile for Funk security
1 Select Start > Settings > the Systems tab > Wireless Network.
or
Tap the iConnect icon ( ) in the lower right corner of the Today
screen and select Tools > Wireless Settings.
The Profile Wizard appears.
2 From the Profile list, select the profile you want to configure.
3 Tap Edit Selected Profile.
4 (Optional) Give your profile a meaningful name by selecting the text in
the Profile Label text box and typing a meaningful name.
5 From the Network type list, select either Infrastructure or Ad-Hoc.
Select Infrastructure if the network uses access points to connect to the
corporate network or internet. Select Ad-Hoc to set up a private
network with one or more participants.
6 Enter the SSID (Network Name) if different than the profile name.
7 (Optional) Check the Enable Power Management box to conserve
battery power.
8 Click OK.
Configuring WEP Security With Profile Wizard
1 In the Profile Wizard, select the Security page.
2 For 8021x Security, choose None.
3 For Association, choose Open or Shared to match the settings on your
access point.
4 For Encryption, choose WEP.