Datasheet

ManualsBrandsIntermec Manualscomputers & electronics850-557-001

Accessory Guide

CN

Series

Docks and Modules

Accessory Name Part Number Description

Single Dock 871-025-001 USB Host and Client Support with bay for

charging an auxiliary battery pack. (7.5”L x

4.0”W x 2.3”T) Requires Power Supply 851-

082-003 and country-speciﬁc AC power cord.

Optional: Single Dock Ethernet or Modem

Modules.

Single Dock Ethernet Module

871-025-101 CN3 Series Ethernet Module interfaces with

USB Host connector on Single Dock,

p/n 871-025-001. (1.5”L x 2.5”W x 1”T)

Single Dock Modem Module 871-025-102 CN3 Series v.92 Modem Module interfaces

with USB Host connector on Single Dock, p/n

871-025-001. (1.5”L x 2.5”W x 1”T) LEDs to

indicate DTR, DCD, TX and RX status.

Multi-Dock 871-026-001 4-slot Ethernet dock provides extra port

allowing for ability to link up to three (3)

multidocks. (17.2”L x 3.75”W x 2.3” T)

Requires Power Supply 851-075-003 and

country-speciﬁc AC power cord.

Multi-Dock, Charge Only 871-026-002 Allows for charging up to 4 devices.

Requires power supply 851-075-003 and

country speciﬁc power cord.

(17.2”L x 3.75”W x 2.3” T)

Multi-dock Wall Mount Kit 203-641-002 Allows for mounting of one CN3 Series

Ethernet or Charge Only Multi-Dock to

vertical wall surface. (Used with 700 series

too.)

Vehicle Dock 871-027-001 (CN3)

871-027-101 (CN3e)

Provides 3.5 mm headphone (output) jack to

allow for integration into the vehicle audio

system. Cabled RS232 or USB Host support

is also available. Requires use of Intermec

RS232 Serial cable (p/n 225-737-001) or

Intermec USB cable VE011-2016.

Handsfree speakerphone capabilities will

be supported via standard, o-the-shelf

Bluetooth headset and handsfree

speakerphone systems.

The CN3 Series vehicle dock uses the same

mounting

system (p/n 805-611-001) and

vehicle power kits (see below) as the 700 Series

vehicle dock. (5.65”L x 5.31” W x 2.84”T)

Unless otherwise indicated,

all accessories support

both the CN3 and the

CN3e mobile computer.

Summary of content (4 pages)

PAGE 1
CN3 Series Docks and Modules Accessory Name Part Number Description Single Dock 871-025-001 USB Host and Client Support with bay for charging an auxiliary battery pack. (7.5”L x 4.0”W x 2.3”T) Requires Power Supply 851082-003 and country-specific AC power cord. Optional: Single Dock Ethernet or Modem Modules. Single Dock Ethernet Module 871-025-101 CN3 Series Ethernet Module interfaces with USB Host connector on Single Dock, p/n 871-025-001. (1.5”L x 2.
PAGE 2
CN3 Series Accessories Guide Docks and Modules Accessory Name Part Number Description Vehicle Dock Install Kit 203-802-001 Preferred Solution. For connection of Vehicle Dock (871-027-001) directly to vehicle battery. Includes power cables and cable mounting hardware. Order instructions (962-000-021) separately. Vehicle Dock Fuse Block Power 203-803-001 Kit Provides connection to vehicle fuse block. Requires Power Cable (226-109-003). Order instructions (962-040-004) separately.
PAGE 3
CN3 Series Snap-on Adapters Accessory Name Part Number Description Mag Strip Reader 850-557-001 Attaches to heel of CN3 Series devices and provides magnetic stripe reader. Optional: Power Supply (851-089-003) and countryspecific AC power cord. Accessory Name Part Number Description STD Capacity Battery Pack 318-016-001 (CN3) One (1) standard 8.1 watt hours battery pack for the CN3 mobile computer. EXT Capacity Battery Pack 318-016-002 One (1) extended 14.
PAGE 4
CN3 Series Power Supplies and Adapters Accessory Name Part Number Description Universal Power Supply, 12VDC, 851-075-003 3Skt Output Use with CN3 Series Multi-docks (871-026001 & 871-026-002). Order country-specific AC power cord separately. Universal Power Supply, 12VDC 851-082-003 50W FW5012 Use with CN3 Series Single Dock (871-025001) or CN3 Series Quad Battery Charger (852-065-001). Order country-specific AC power cord separately. Universal Power Supply, 5V FW1805 2.35x0.