Product Data Sheet / Brochure

Accessory Guide
CN
Series
Handheld RFID Reader
Accessory Name Part Number Description
IP30 Multiple configuration
numbers. Consult
the price guide.
A reader that snaps onto the
bottom of CN3 Series devices as
a passive UHF RFID handle.
Docks and Modules
Accessory Name Part Number Description
Single Dock 871-025-001 USB Host and Client Support with bay
for charging an auxiliary battery pack.
(7.5”L x 4.0”W x 2.3”T) Requires Power
Supply 851-082-003 and country-
specific AC power cord. Optional: Single
Dock Ethernet or Modem Modules.
Single Dock Ethernet Module 871-025-101 CN3 Series Ethernet Module interfaces with
USB Host connector on Single Dock,
p/n 871-025-001. (1.5”L x 2.5”W x 1”T)
Single Dock Modem Module 871-025-102 CN3 Series v.92 Modem Module interfaces
with USB Host connector on Single Dock, p/n
871-025-001. (1.5”L x 2.5”W x 1”T) LEDs to
indicate DTR, DCD, TX and RX status.
Multi-Dock 871-026-001 4-slot Ethernet dock provides extra port
allowing for ability to link up to three (3)
multidocks. (17.2”L x 3.75”W x 2.3” T)
Requires Power Supply 851-075-003 and
country-specific AC power cord.
Multi-Dock, Charge Only 871-026-002 Allows for charging up to 4 devices.
Requires power supply 851-075-003 and
country specific power cord.
(17.2”L x 3.75”W x 2.3” T)
Multi-dock Wall Mount Kit 203-641-002 Allows for mounting of one CN3
Series Ethernet or Charge Only
Multi-Dock to vertical wall surface.
(Used with 700 series too.)
Unless otherwise indicated,
all accessories support
both the CN3 and the
CN3e mobile computer.