Datasheet

ManualsBrandsIntermec ManualsPower Supply Units871-236-001

Accessories Guide

RFID-Ready Snap-On Adapter

Accessory Name Part Number Description

IP30 Part Number

available in August

Snaps onto the bottom of CK3 Series

devices as a passive UHF RFID handle.

Docks and Modules

Accessory Name Part Number Description

Single Dock 871-228-001 USB Host and Client Support with bay

for charging an auxiliary battery pack.

Requires Power Supply 851-061-207 and

country speciﬁc AC power cord. Optional:

Single Dock Ethernet Modules.

Multi-Dock, Ethernet

(Photo Pending)

871-229-002 4-slot Ethernet dock provides extra

port allowing for ability to link up

to three (3) multi-docks. Requires

Power Supply 851-064-006 and

country-speciﬁc AC power cord.

Multi-Dock, Charge Only

(Photo Pending)

871-229-001 Allows for charging up to 4 devices.

Requires power supply 851-064-006 and

country speciﬁc power cord.

Vehicle Dock 871-231-001 Securely holds CK3 and provides

power. Cabled RS232 (5V pwr on

pin 9) or USB Host support is also

available. Requires use of Intermec

RS232 Serial cable (p/n 225-737-001) or

Intermec USB cable (VE011-2016).

The CK3 Series vehicle dock uses the same

mounting system (p/n 805-611-001) and

vehicle power kits (p/n 851-065-105) as

the CN3 & 700 Series vehicle dock.

Non-Powered Vehicle Holder 871-236-001 Securely holds CK3.

IP30 Vehicle Holder

(Photo Pending)

871-237-001 Non-Powered vehicle holder to

hold CK3 with IP30 attached.

Single Dock Ethernet Module

(Photo Pending)

871-025-101 CK3 Series Ethernet Module interfaces with

USB Host connector on Single Dock.

Summary of content (4 pages)

PAGE 1
CK3 RFID-Ready Snap-On Adapter Accessory Name Part Number Description IP30 Part Number available in August Snaps onto the bottom of CK3 Series devices as a passive UHF RFID handle. Accessory Name Part Number Description Single Dock 871-228-001 USB Host and Client Support with bay for charging an auxiliary battery pack. Requires Power Supply 851-061-207 and country specific AC power cord. Optional: Single Dock Ethernet Modules.
PAGE 2
CK3 Accessories Guide Holsters & Handles Accessory Name Part Number Description Standard Belt Holster – no handle 825-198-001 Rugged lightweight holster with belt designed for use with handheld applications where scan handle is not required. Standard Belt Holster – with handle 825-199-001 Rugged lightweight holster with belt designed for use with handheld applications requiring a scan handle. Scan Handle 203-879-001 Customer installable scan handle (replaces the hand strap).
PAGE 3
CK3 Accessories Guide Batteries & Chargers Accessory Name Part Number Description Standard Capacity Battery Pack 318-033-001 One (1) rechargeable 7.4 watt hours (2000 mAh) standard battery pack for the CK3. Extended Capacity Battery Pack 318-034-001 One (1) rechargeable 18.5 watt hours (5100 mAh) extended battery pack for the CK3. Quad Battery Charger 871-230-001 Charges four CK3 Series battery packs. Requires Power Supply 851-061-207 and country-specific AC power cord.
PAGE 4
CK3 Power Supplies & Adapters (continued) Accessory Name Part Number Description Universal Power Supply, 5V 851-065-105 AC power supply with barrel jack. Allows charging of CK3 Series devices without a dock. Requires use of CK3 Series Snapon Power Adapter (850-557-001). Order country-specific AC power cord separately. Auto Power Adapter 852-043-003 For use with Cigarette Lighters. Barrel jack that allows charging of CK3 handheld. Requires use of CK3 Series Snap-on Power Adapter (850-557-001).