User's Manual

Chapter 3 — Configuring the CK32 I-Safe
CK32 I-Safe Handheld Computer User’s Manual 49
Connecting to a Bluetooth Audio Device
Use the Bluetooth Audio applet to discover, activate, and connect
to Bluetooth audio devices such as a Bluetooth headset. You can
control the audio volume and microphone gain for the connected
Bluetooth audio device.
To connect to a Bluetooth headset
1 Select Start > Settings > the System tab > Bluetooth Audio.
2 Tap Search for devices. Discovered audio devices are added
to the list with an icon to identify them.
3 Double-tap a Bluetooth audio device from the list of Connect
headsets / hands-free devices.
4 When a pop-up menu appears and then select Activate. The
device icon changes to include a check mark.
5 Double-tap the device name and then select Connect. When
a connection is established, the statues changes to connected.
6 Tap the Volume slider bar or Microphone slider bar to adjust
the setting.
Setting Up 802.11 Radio Communications
The CK32 I-Safe has an internal 802.11 b/g radio to transfer
data using wireless communications. This section of the manual
assumes that you have already set up your wireless
communications network including your access points. If you are
using a UDP Plus network, you also need to have your Intermec
Application Server communicating with a host computer.
The CK32 I-Safe supports these network protocols:
•TCP/IP
• UDP Plus
The next sections explain the parameters you need to configure
for the CK32 I-Safe to work in your wireless network.
Note: The CK32 I-Safe supports Ethernet communication or
802.11 communications but it cannot support both at the same
time. The factory default is no communications are enabled.