User's Manual

Chapter 2 — Connecting and Configuring the CK61
CK61 Handheld Computer User’s Manual With Windows Mobile 35
2 Select Enable > Ethernet.
3 (Optional) Configure the IP Settings for the Ethernet Adapter if
you are not using DHCP. DHCP is the default setting.
4 (Optional) If required for your network, you may also need to set
these parameters on each computer:
• Primary and secondary DNS servers
• Primary and secondary WINS servers
5 Make sure that your computer is talking to the network and that
the network can see your computer.
Configuring 802.11 Radio Communications
The CK61 may have an internal 802.11 b/g radio to transfer data
using wireless communications. This section of the manual assumes
that you have already set up your wireless communications network
including your access points. If you are using a UDP Plus network,
have your Intermec Application Server communicate with a host
computer.
Your computer supports these network protocols:
• TCP/IP
• UDP Plus
The next sections explain the parameters you need to configure for
the CK61 to work in your wireless network.
Configuring the Network Parameters for a TCP/IP Network
In a TCP/IP network, the CK61 communicates with a host computer
directly using TCP/IP. The access point acts as a bridge to allow
communications between the wired network and the wireless
network.