User`s manual

Chapter 2 — Connecting and Configuring the CK61
CK61 Handheld Computer User’s Manual With Windows CE 51
Tap the iConnect icon ( ) in the lower right corner of the Today
screen and select To o l s > Wireless Settings. The Profile Wizard
appears.
2 From the Profile list, select the profile you want to configure.
3 Tap Edit Selected Profile.
4 (Optional) Give your profile a meaningful name by selecting the
text in the Profile Label text box and typing a meaningful name.
5 From the Network type list, select either Infrastructure or Ad-Hoc.
Select Infrastructure if the network uses access points to connect
to the corporate network or internet. Select Ad-Hoc to set up a
private network with one or more participants.
6 Enter the SSID (Network Name) if different than the profile name.
7 Click OK.
Configuring WEP Security With Profile Wizard
1 In the Profile Wizard, select the Security page.
2 For 802.1x Security, choose None.
3 For Association, choose Open or Shared to match the settings on
your access point.
4 For Encryption, choose WEP.
5 From the Data TX Key list, select the key you want to use for
transmitting data.
6 Define a value for the keys you want to use. You can define up to
four keys (Key 1 through Key 4).
Enter an ASCII key or a hex key that is either 5 bytes or 13 bytes
long depending on the capability of the radio. Set a 5-byte value
for 64-bit WEP or a 13-byte value for 128-bit WEP. Hex keys must
be preceded by 0x and contain 5 or 13 hex pairs.
7 Tap OK.
Configuring WPA-PSK Security With Profile Wizard
1 In the Profile Wizard, select the Security page.
2 For 802.1x Security, choose None.