70 Series Mobile Computer CK70, CK71, CN70, CN70e User Manual
Intermec by Honeywell 6001 36th Ave.W. Everett, WA 98203 U.S.A. www.intermec.com The information contained herein is provided solely for the purpose of allowing customers to operate and service Intermec-manufactured equipment and is not to be released, reproduced, or used for any other purpose without written permission of Intermec by Honeywell.
Document Change Record This page records changes to this document. The document was originally released as Revision 001. Version Number Date Description of Change 007 6/2014 Added information on the N5603 scanner, how to set a password in Intermec Settings, support for HanXin symbology, and updated language provisioning settings. Also updated the cleaning procedure and default settings. 006 03/2013 Added information to support the 70 Series RFID Mobile Computers.
iv 70 Series Mobile Computer User Manual
Contents Contents Before You Begin. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi Global Services and Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi Warranty Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents About the Imager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Use the Imager as a Flashlight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Read Bar Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Read RFID Tags . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents About the Network Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 Make a Phone Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 Make an Emergency Phone Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 4 Use the Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents About Network Communications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 Configure 802.11a/b/g/n (Wi-Fi) Radio Communications . . . . . . . . . . . . . . . . . . . 86 Configure Ethernet Communications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 Configure Bluetooth Communications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87 About Serial and USB Communications . . . . . . . . . . .
Contents Troubleshoot Operating the Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .125 Troubleshoot RFID Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .126 Call Product Support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .127 Find Your Configuration Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents B Keypads and Keystrokes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161 Standard Characters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .162 CN70 Keypads and Keystrokes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .162 CN70e Keypads and Keystrokes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Before You Begin Before You Begin This section provides you with safety information, technical support information, and sources for additional product information. Safety Information Your safety is extremely important. Read and follow cautions in this document before handling and operating Intermec equipment. You can be seriously injured, and equipment and data can be damaged if you do not follow the safety cautions.
Before You Begin Visit the Intermec technical knowledge base (Knowledge Central) at www.intermec.com and click Support > Knowledge Central to review technical information or to request technical support for your Intermec product. Send Feedback Your feedback is crucial to the continual improvement of our documentation. To provide feedback about this manual, please contact the Intermec Technical Communications department directly at TechnicalCommunications@intermec.com. Telephone Support In the U.S.A.
Before You Begin To download documents 1 Visit the Intermec website at www.intermec.com. 2 Click the Products tab. 3 Using the Products menu, navigate to your product page. For example, to find the CN70 computer product page, click Computers > Handheld Computers > CN70. 4 Click the Manuals tab. If your product does not have its own product page, click Support > Manuals. Use the Product Category, the Product Family, and Product to find your documentation.
Before You Begin xiv 70 Series Mobile Computer User Manual
1 About the Computer Features This chapter introduces the 70 Series Mobile Computers with Windows® Embedded Handheld operating system. Use this chapter to learn about the basic features and functions of each computer, as well as the available accessories for it.
Chapter 1 — About the Computer Features About the 70 Series Mobile Computers The ergonomically-designed Intermec 70 Series Mobile Computers are built on the Microsoft Windows Embedded Handheld operating system. They are lightweight, easy-to-use, and run most software developed for the Windows Embedded platform, including standalone, client-server, and browser-based applications. The 70 Series consists of four different models: CN70, CN70e, CK70, and CK71.
Chapter 1 — About the Computer Features CN70 Back View Imager Camera Speaker port Battery IrDa port CK70 and CK71 Front View Cell phone speaker Good read LED Notification LED Battery status LED Scan button On/off button Microphone 70 Series Mobile Computer User Manual 3
Chapter 1 — About the Computer Features CK70 (Left) and CK71 (Right) Back View Imager Camera Imager Camera Left speaker port IrDA port Battery Left speaker port IrDA port Battery What’s New in This Release This version of the user manual contains these updates: • • • • 4 Added language persistence through an operating system update. For more information, see “Save Current Language when You Update the OS” on page 11. Added information on setting a password for Intermec Settings.
Chapter 1 — About the Computer Features Overview of 70 Series Features The 70 Series includes these standard features: Intermec 70 Series Feature List Standard Features EA30 area imager that can read bar codes and capture images. CK70 CK71 CN70 x Choice of EA30, EX25, or N5603 imagers x CN70e x x x x x x x Multi-processor architecture with 512 MB DRAM and 1G Flash x 802.
Chapter 1 — About the Computer Features About the Status LEDs Use the following illustrations and table to understand the status LEDs on your computer. All six status LEDS are not available on every 70 Series computer. For example, the QWERTY versions of the CN70 and CN70e do not have a Green key status LED.
Chapter 1 — About the Computer Features Location of the CK70 and CK71 Status LEDs Notification LED Good Read and Ready-to-Work status LED Orange key status LED Battery status LED Green key status LED Shift key status LED (CK70 alphanumeric and CK71 function numeric) Shift key status LED (CK70 numeric and CK71 alphanumeric) Status LED Descriptions LED Color Description Notification Amber This LED is user-programmable.
Chapter 1 — About the Computer Features Status LED Descriptions (Continued) LED Color Description Off ITE is not installed or not running. The computer is healthy. See “About Battery Status” on page 14. Battery Key Status Shift Green The Green function key is enabled. When writing RFID tags, a Good Read LED will blink on Green if a write is successful. Orange The Orange function key is enabled. Red The Shift key is enabled.
Chapter 1 — About the Computer Features 70 Series Accessories (Continued) Accessory Description Desktop Stand Use the desktop stand to hold the 70 Series computer on your desk or a stable surface. DEX/UCS Snap-On Adapter Use this adapter to receive and send serial communications through a DEX/UCS connection. DX1 Desktop Dock with USB connectivity Use the desktop dock with the: • Computer cup to charge the battery while it is installed in the computer. • Battery cup to charge the battery.
Chapter 1 — About the Computer Features 70 Series Accessories (Continued) Accessory Description Vehicle Dock Use the vehicle dock to provide power and hold your computer while you are using it in a vehicle. Vehicle Holder Use the vehicle holder to hold your computer while you are using it in a vehicle. Vehicle Power Adapter Use the vehicle power adapter to provide power to the computer from your vehicle.
Chapter 1 — About the Computer Features Turn On the Computer for the First Time You may have to select a language the first time you turn on the computer. 1 Insert the battery into the computer. The computer turns on and you are prompted to select a language. ud 2 Use the , , and Enter key to select a language and navigate through the screens. The language you selected loads on the computer. The computer restarts when it finishes configuring the device for your language.
Chapter 1 — About the Computer Features 70 Series Charging Accessories Charging Accessory Charging Time Snap-on adapters Up to 6 hours DX1, DX2, or DX4 dock Up to 6 hours CN70, CN70e, CK70, and CK71 Vehicle Power Adapter Up to 6 hours Change the Battery If your battery power is low, you need to either charge the battery in the computer, or replace it with a charged battery. 1 Save your files and close any open applications.
Chapter 1 — About the Computer Features Detach the Handstrap From a CK70 or CK71 4 Make sure the computer is in hibernate mode and the screen is off. 5 Remove the battery. • On the CN70 or CN70e, push the battery release toward the bottom of the computer until the battery releases and then lift it away from the computer.
Chapter 1 — About the Computer Features • On the CK70 or CK71, push the battery release toward the top of the computer until the battery releases and then lift it away from the computer. 6 Insert the top end of a fully charged battery into the computer, and press down firmly on the bottom of the battery. Make sure that the battery release is fully engaged. About Battery Status Use the battery icon on the Title bar to see the power status of your battery.
Chapter 1 — About the Computer Features Battery Icon Status Descriptions Battery Icon Status Battery is fully charged. Battery has a high charge. Battery has a medium charge. You should be able to work for several more hours before changing batteries. Battery is low. You need to charge or replace the battery soon. Battery is critically low. You need to replace the battery now. Battery is charging. The battery is not installed.
Chapter 1 — About the Computer Features About Battery Life and Conservation Batteries that are stored outside the computer for long periods of time slowly discharge. Intermec recommends storing the battery in a charger to maintain battery performance. Battery Conservation Tips When You Want To: Do This to Save Battery Power: Use the computer and • Connect the computer to an external power the Low Battery status source.
Chapter 1 — About the Computer Features CN70 QWERTY Keypad @ $ Q ? E S D & A + % W 2 1 R T F G / X C N B V O K L P 9 8 sym Esc J H I 6 5 4 7 Z 3 U Y M 0 Enter Space CN70 Numeric Keypad Esc 1 Caps 2 ABC 3 DEF 4 GHI 5 JKL 6 MNO 7 PQRS 8 TUV 9 WXYZ 0 Space 70 Series Mobile Computer User Manual Enter 17
Chapter 1 — About the Computer Features CN70e QWERTY Numeric Keypad CN70e Calculator-Style Numeric Keypad 18 70 Series Mobile Computer User Manual
Chapter 1 — About the Computer Features CN70e Numeric Keypad The CK70 comes with either a large alpha or an alphanumeric keypad. The CK71 comes with either a numeric function keypad or an alphanumeric keypad. The computer has an ambient light sensor that detects low light and turns on the keypad backlight. By default, the keypad backlight is enabled in low light conditions. You can disable the keypad backlight to conserve power. Use Intermec Settings to configure the backlight.
Chapter 1 — About the Computer Features CK70 Large Alpha Keypad 20 70 Series Mobile Computer User Manual
Chapter 1 — About the Computer Features CK70 Alphanumeric Keypad 70 Series Mobile Computer User Manual 21
Chapter 1 — About the Computer Features CK71 Numeric Function Keypad 22 70 Series Mobile Computer User Manual
Chapter 1 — About the Computer Features CK71 Alphanumeric Keypad 70 Series Mobile Computer User Manual 23
Chapter 1 — About the Computer Features Enter Characters on the QWERTY Keypad You need to use the orange modifier key b and the Shift key y to access all characters and functions on the QWERTY keypad. To type a character: • Press the key for that character. To type a character or access a function on the overlay: • Press b and then press the key for the character or function.
Chapter 1 — About the Computer Features For example, in the upper right corner of the 2 key there are the letters “ABC”: • To type “c”, press c 2 2 2. • To type “C,” press c 1 and then press c 2 2 2. Note: On the calculator-style keypad, the 2 is replaced by the 8. To only type letters: Press c c to lock the green modifier key, and then press the key one to four times depending on the position of the letter.
Chapter 1 — About the Computer Features About the Power Button When you press the Power button, a dialog box with a list of power options appears. If you do not select a power options setting, the currently selected action (the button outlined in bold) occurs after the timeout. The Intermec Power Options Default Screen Note: The Real Time Clock (RTC) persists through all of the power options as long as it receives power from the Real Time Clock battery.
Chapter 1 — About the Computer Features Intermec Power Options (Continued) Option Description Suspend Medium power saving mode. The computer powers off all radios and internal devices not involved in saving the system state, but the phone stays on to receive calls. This is the default setting. You can wake the computer by pressing the Power button, pulling the scanner trigger, receiving a call, scheduling an event such as an alarm, or by connecting external power.
Chapter 1 — About the Computer Features Configure the Screen Backlight The display has an ambient light sensor that automatically adjusts the backlight intensity to conserve power and ensure the display is readable. By default, the screen turns off when there is no activity with the computer. Press a key or tap the screen to resume activity. You can configure the screen backlight to turn off. 1 Tap Start > Settings > Power. 2 Tap Advanced on the horizontal scroll bar.
Chapter 1 — About the Computer Features You can adjust the volume settings using Intermec Settings or the horizontal scroll menu. 1 Tap the Volume icon at the top of the screen, and then tap the volume icon on the horizontal scroll menu. 2 Use your stylus or the u and d keys to adjust the volume slider to the volume you want, select Vibrate, or select Off. About the Imager The computer ships with an internal imager. You can use the imager as a flashlight or to read bar codes.
Chapter 1 — About the Computer Features Read Bar Codes Depending on the imager model in your computer, you can read 1D and 2D bar code symbologies, composite symbologies, and postal codes. You can also connect the computer to cordless scanners (like the SF51 and SR61) through Bluetooth communications or tethered scanners (like the SR30 and SR61T) through the RS-232 adapter. For help, see “Connect to a Bluetooth Scanner” on page 88 and “Connect to a Tethered Scanner” on page 92, respectively.
Chapter 1 — About the Computer Features Scanning with the EA30 Imager 5 Use the laser pointer as a guide and aim toward the middle of the bar code. Make sure that the illumination beam or frame covers the bar code you are trying to decode. When the computer successfully reads a bar code label, you hear a high beep, and the Good Read LED turns on briefly. 6 Release the Scan button.
Chapter 1 — About the Computer Features Read RFID Tags If your computer is RFID-enabled, you can use the Intermec RFID Demo to read a single RFID tag or a group of RFID tags. Note: Keep fingers below the yellow warning label. 1 Start the Intermec RFID Demo application. 2 From the Scan mode drop-down menu, select Read single tag. 3 Hold the computer by the scan handle only or below the yellow warning label so that your hand is mostly on the keypad end of the computer.
Chapter 1 — About the Computer Features 4 Position the computer an inch from the tag and press the Scan button. If the read is successful, a table appears at the bottom of the screen that displays the EPC value of that tag. For more information about how to use the Intermec RFID Demo, refer to the Intermec RFID Demo User Guide. Insert a MicroSD Card You can use a microSD™ card to increase file storage and install software. The computers support an optional 32 GB maximum capacity microSD card.
Chapter 1 — About the Computer Features 3 Remove the two Phillips screws and open the card access door. 4 Slide the SIM card door to the left to unlock it and open the door.
Chapter 1 — About the Computer Features 5 Slide the microSD card door towards the top of the computer to unlock it and open the door. 6 Slide the microSD card into place. 7 Close the microSD card door and slide it towards the bottom of the computer to lock it in place. 8 Close the SIM card door and slide it to the right to lock it in place. 9 Close the card access door and replace the two screws. 10 Install the battery.
Chapter 1 — About the Computer Features Install a MicroSD Card in a CK70 or CK71 You need a Phillips screwdriver to install the microSD card. 1 Press the Power button to turn off the computer. 2 Remove the handstrap. 3 Remove the two screws that attach the interface adapter cover to the back of the computer. 4 Slide the SIM card door to the left to unlock it and open the door.
Chapter 1 — About the Computer Features 5 Slide the microSD card door towards the top of the computer to unlock it and open the door. 6 Slide the microSD card into place. 7 Close the microSD card door and slide it towards the bottom of the computer to lock it in place. 8 Close the SIM card door and slide it to the right to lock it in place. 9 Replace the interface adapter cover and attach with the two screws removed in Step 2. 10 Install the battery.
Chapter 1 — About the Computer Features Transfer Files to and from Your PC The 70 Series support these two methods for transferring files to and from your PC: • • Using Microsoft ActiveSync or Windows Mobile Device Center. Using the 70 Series as a mass storage device. How to Transfer Files To transfer files, you need to physically connect your mobile computer to your PC and install either Microsoft ActiveSync (Windows XP or earlier) or Windows Mobile Device Center (Windows Vista or Windows 7) on your PC.
2 About the User Interface and Intermec Applications Use this chapter to learn about the Windows Embedded Handheld user interface and how to interact with the screen. You can also use this chapter to learn about the Intermec applications on your computer, as well as additional Intermec applications you can download.
Chapter 2 — About the User Interface and Intermec Applications About the User Interface The user interface for the Windows Embedded Handheld 6.5 operating system is different from previous versions of Windows Mobile. The interface is touch-friendly and easy to navigate. Use the following sections to understand how to interact with Windows Embedded Handheld 6.5. About the Home Screen When you turn on your mobile computer, the Home screen is the first screen that appears.
Chapter 2 — About the User Interface and Intermec Applications A horizontal scroll bar appears when you tap an icon in the Title bar. This horizontal scroll bar makes it easy to access the applications associated with the Tile bar icons. The horizontal scroll bar also contains a magnifier which improves the touch experience by making parts of the screen large enough to tap with your finger. The horizontal scroll bar also replaces tabs within Windows screens and allows for easier navigation.
Chapter 2 — About the User Interface and Intermec Applications Supported Gestures (Continued) Gesture Description Flick Initiates scrolling in the direction (horizontal or vertical) the finger or stylus moves across the screen. Pan Press and hold on the screen and then drag in any direction. Title Bar Status Icons Tappable icons in the Title bar immediately show you the status of your network, your phone, the volume, the battery, and the time.
Chapter 2 — About the User Interface and Intermec Applications Title Bar Status Icon Descriptions (Continued) Icon Description There is a problem with the ActiveSync synchronization. An ActiveSync synchronization is in progress over USB. A CDMA connection is active. A CDMA connection is available, but not transferring data. A UMTS network is available. Connecting to a UMTS network. A UMTS connection is active. A 3G+ network is available. An EDGE network is available. Connecting to an EDGE network.
Chapter 2 — About the User Interface and Intermec Applications Title Bar Status Icon Descriptions (Continued) Icon Description Wi-Fi is not connected to a network, and other networks are detected. Other wireless networks are detected. Connected to a wireless network. Synchronizing through a Wi-Fi connection. Connected to a wireless network, and other networks are detected. Information about a new wireless network is available. A network connection is active. A network connection is inactive.
Chapter 2 — About the User Interface and Intermec Applications Title Bar Status Icon Descriptions (Continued) Icon Description The volume is off. The battery has a full charge. The battery has a high charge. The battery has a medium charge. The battery has a low charge. The battery has a very low charge. The battery is attached to external power and is charging. No battery is installed in the computer. Call forwarding is on. Voice mail is off. GPS locator is off. GPS locator is on.
Chapter 2 — About the User Interface and Intermec Applications About Intermec Applications Intermec provides many useful applications to help you configure, troubleshoot, and connect your computer to other devices and networks. You can also download additional applications from the Intermec website to help you use all of the features of your computer. Applications Available on the Mobile Computer Use this table to understand some of the Intermec applications available on your computer.
Chapter 2 — About the User Interface and Intermec Applications Intermec Applications Available on the Mobile Computer (Continued) Icon Application Description ISpyWiFi Use ISpyWiFi to check your 802.11 status and diagnose issues with the connection. For more information, see “Check 802.11 Network Status” on page 121. Profile Settings Use Profile Settings to easily configure the computer for a specific use. You can choose predefined values for the Camera, Power, and Scanning.
Chapter 2 — About the User Interface and Intermec Applications Applications You Can Download to the Mobile Computer You can download several Intermec applications that extend the capabilities of your 70 Series computer. Some of the applications require the purchase of a license to run. All of the applications listed below are available from the Intermec website at www.intermec.com > Support > Downloads. Go to this website and enter the information to find your 70 Series computer.
Chapter 2 — About the User Interface and Intermec Applications About Intermec Browser Intermec Browser is a web browser designed for Intermec computers and is compatible with Microsoft® Internet Explorer® 6 (IE6) and Pocket Internet Explorer (PIE). This locked-down application deliberately limits normal web browser functionality. For example, users cannot exit the program, type URLs, or use the Back button.
Chapter 2 — About the User Interface and Intermec Applications About Intermec Launcher Intermec Launcher is a Microsoft Windows application, designed for Intermec mobile computers, that provides a platform from which other applications may be launched while attempting to provide a locked-down environment. You can configure Intermec Launcher for your specific application requirements. You can download and use Intermec Launcher for a 60-day evaluation period.
Chapter 2 — About the User Interface and Intermec Applications SmartSystems provides a consistent way to manage Intermec devices including mobile computers, RFID readers, printers and bar code scanners, located on-site or remote, to make the most of limited IT resources, and lower the total cost of ownership for Intermec data collection equipment. SmartSystems can be downloaded at no charge from the Intermec website. For more information, visit www.intermec.com/SmartSystems.
Chapter 2 — About the User Interface and Intermec Applications 52 70 Series Mobile Computer User Manual
3 Use the Phone You can use the phone feature to make and receive telephone calls, as well as transmit data through cellular wide-area networks (WWANs). However, the RFID-enabled computers do not support the phone feature.
Chapter 3 — Use the Phone About the Phone The 70 Series mobile computer supports two types of cellular technology: • CDMA • UMTS Note: Your Flexible Network Radio mobile computer supports both CDMA and UMTS technology. Your Flexible Network Radio does not support Network Information and Time Zone (NITZ) messages to automatically set the system time. Phone features on the computer include a speaker and a microphone. You can also use a Bluetooth headset or hands-free kit.
Chapter 3 — Use the Phone Activate the UMTS Phone You use a SIM card to activate the UMTS phone on your computer. You can purchase the SIM card from your network provider. 1 Press the Power button to turn off the computer. 2 On the CN70 or CN70e: a Push the battery release tab forward until the battery releases, and lift the battery away from the computer. b Remove the two Phillips screws and open the card access door.
Chapter 3 — Use the Phone 5 Slide the SIM card into the slot in the card access door. 6 Close the SIM card door and slide it to the right to lock it in place. 7 Close the card access door and replace the two screws. 8 Install the battery. Press down firmly on the bottom of the battery, and make sure that the battery release tab is fully engaged. 9 Press the Power button. The computer cold boots.
Chapter 3 — Use the Phone The carrier requires the Mobile Equipment Identifier (MEID) to start the activation process. You can find the MEID: on a label located in the upper right corner of the battery compartment. • on the outside of the computer shipping box. • in the Version Information menu. Tap Start > Settings > Personal > Phone > Version Information tab. The activation process is slightly different for each CDMA carrier.
Chapter 3 — Use the Phone Turn the Phone On and Off Before you can start using your phone, you need to enable it. You can use Wireless Center to enable and disable your phone, as well as Bluetooth and Wi-Fi communications. 1 Tap Start > Settings > Connections > Wireless Center. 2 Tap Phone to turn on the Phone 3 (Optional) To configure the phone, tap Menu in the tile bar at the bottom of the screen. 4 Tap OK when you are done configuring the options. 5 Tap OK to close Wireless Center.
Chapter 3 — Use the Phone Switch Network Carriers Use the Carrier Selection application to quickly change your WWAN radio network carrier on your Flexible Network Radio-enabled CN70, CN70e, or CK70 mobile computer. 1 Tap Start > Settings > Personal > Carrier Selection. 2 Select a Carrier and tap OK. A dialog box appears asking if you want to switch carriers. 3 Tap Yes to switch carriers. If the update is successful, the Carrier Selection screen appears and displays the updated carrier information.
Chapter 3 — Use the Phone Add the WWAN Connection If you are switching to a CDMA network, or switching from a CDMA network to a UMTS network, you must add the WWAN connection in Intermec Settings. 1 Tap Start > Settings > System > Intermec Settings > Communications > WWAN Radio. 2 Select Add New WWAN Connection. 3 Enter a Connection Name. In the Phone Number field, enter #777 and tap OK. The Manage WWAN Radio State screen appears.
Chapter 3 — Use the Phone About the Network Connection Note: When you perform a clean boot, the selected carrier will default to generic UMTS. When you perform a clean boot, all user-created network connection entries are deleted, and only the generic UMTS remains. After you perform a clean boot, you can find more information about generic UMTS by tapping Start > Settings > Connections > Connections > Tasks tab > Manage Existing Connections > Modem tab.
Chapter 3 — Use the Phone 62 70 Series Mobile Computer User Manual
4 Use the Camera You can use the color camera to take pictures and record videos.
Chapter 4 — Use the Camera About the Color Camera The camera and flash are located on the back of the computer. You run the Pictures & Videos application to access the camera features. Note: While the Pictures & Videos application is running, you cannot use the imager. In the Pictures & Videos application, you can: configure camera settings. take, view, and edit pictures. switch between Still (camera) mode and Video mode. record and launch video clips stored on the computer or a microSD card.
Chapter 4 — Use the Camera About the Camera Settings You can configure camera settings to meet the needs of your operating environment: • • Basic camera settings are available from the main menu of the Pictures & Videos application. Advanced camera settings are available from the Settings menu option from the main menu of the Pictures & Videos application. Basic Camera Settings Setting Description Mode Determines the camera operating mode: • Normal: Takes one picture.
Chapter 4 — Use the Camera Setting Description Focus Determines if the focus is continuous, single shot, or manual. If you select manual focus, you need to set the Focus Distance. Focus Distance The distance at which the camera focuses. Values are 2.5 in, 4.5 in, 7.5 in, 1-3 ft, 3-9 ft, and Infinity (focuses the lens so that an infinitely distant object would be in focus).
Chapter 4 — Use the Camera Setting Description White Balance Compensates for specific lighting conditions to produce true color images: • • • • • Auto: Automatic White Balance (AWB) control. Sunny: Outdoors in bright, midday sunny conditions. Cloudy: Outdoors with a completely overcast cloudy sky. Tungsten: Indoors lit with tungsten light bulbs. Office: Indoors lit with fluorescent light bulbs. Default is Auto.
Chapter 4 — Use the Camera Configure Camera Scenes You can modify predefined camera scenes or create new scenes to further accommodate your specific needs. 1 Tap Start > SceneEditor. 2 Select a Scene to configure. Or, to create a new scene, tap New. 3 Configure the necessary settings. If you are creating a new scene, type a name in the Scene box. 4 Tap Save. 5 When you are prompted to save the settings, tap Yes. The changes you made are saved. 6 Tap ok to close the message box.
Chapter 4 — Use the Camera Record a Video You need to switch to video mode to record video. When you record video, the video is saved as an .mp4 file and stored in the /My Documents/My Pictures folder. 1 Tap Start > Pictures & Videos. 2 Tap the Camera icon in the grid or the Camera button on the Tile bar, or press Enter. 3 Tap Menu > Video. 4 Using the screen as a viewfinder, move the video camera until you see the scene you want to video record. 5 Press Enter to start recording.
Chapter 4 — Use the Camera 70 70 Series Mobile Computer User Manual
5 Use GPS The 70 Series computer comes equipped with an integrated Global Positioning System (GPS) receiver if your computer has phone capability (WWAN radio). The GPS receiver can deliver standard National Marine Electronics Association (NMEA) data strings to GPS applications. The RFID-enabled computers do not have phone capability, and therefore do not support GPS.
Chapter 5 — Use GPS About the Integrated GPS on Your Computer Intermec recommends that you use the GPS Intermediate Driver (GPSID) instead of directly accessing the GPS hardware. The GPSID is a Microsoft software component that interacts between applications and the GPS hardware. As a Microsoft software component, the GPSID: • • allows multiple applications to simultaneously access the GPS data stream. provides access to GPS data without requiring applications to recognize and parse NMEA syntax.
Chapter 5 — Use GPS 3 Tap Access in the horizontal scroll bar and select the Manage GPS automatically check box. 4 Tap OK. About the GPS Module Operating Modes The integrated GPS module has three operating modes: • Standalone • MS Assisted (Mobile Station Assisted) • gpsOneXTRA™ (UMTS computers only) In Standalone mode, the GPS module relies solely on GPS satellites to determine position.
Chapter 5 — Use GPS Qualcomm’s gpsOneXTRA Assistance technology provides enhanced operation for Standalone GPS. This option enables the UMTS-enabled computer to automatically download a small assistance data file from the XTRA servers through a brief internet access session. To use this option, you must have a valid and activated WAN data connection. Note: Internet connection fees may apply. Another option you can configure with iGPS is the fix interval.
6 Configure the Computer Use this chapter to learn about the available methods for configuring your mobile computer and how to use Intermec Settings. You can also use this chapter to learn how to configure network communications and wireless security.
Chapter 6 — Configure the Computer How to Configure the Computer You can configure many parameters on the computer such as the bar code symbologies it decodes or the network settings. The values you set for these parameters determine how the computer operates. There are several ways to configure the computer: Directly on the computer. You can use Intermec Settings directly on the computer to change only the settings on that computer.
Chapter 6 — Configure the Computer Use Intermec Settings on the Computer Use Intermec Settings to configure parameters for Intermec applications on the computer as well as some device-specific parameters like volume. You can configure parameters for important functions like data collection and communications. Start Intermec Settings Intermec Settings is located on the System screen. Tap Start > Settings > System > Intermec Settings. The Intermec Settings Main Menu appears.
Chapter 6 — Configure the Computer Most parameters are saved as soon as you tap OK. Some settings such as the Serial Port Switch require you to reboot the computer for the changes to take effect.
Chapter 6 — Configure the Computer Communications Menu (Continued) Communications Options Parameters You Can Configure Bluetooth Bluetooth settings (power, discoverable, connectable, and so on) WWAN Radio • • • • • Serial Port Switch Serial port switch settings (IrDA, docking connector, and back interface) Add WWAN connection Edit WWAN connections Manage WWAN radio Carrier Selection WWAN information Device Settings Menu Device Settings Options Parameters You Can Configure Date and Time Date and
Chapter 6 — Configure the Computer Device Settings Menu (Continued) Device Settings Options Parameters You Can Configure USB USB function driver System Component Versions System component versions (read-only) IDL Runtime Versions ITC50 (read-only) Profile Settings Application Whether these parameter options appear in Profile Settings: • Camera • Power • Scanning Features Disabled by Policy None (read-only) Printer Menu Printer Options Parameters You Can Configure Printer (if connected through Bl
Chapter 6 — Configure the Computer Virtual Wedge Menu Virtual Wedge Options Parameters You Can Configure Enable Virtual Wedge Enable virtual wedge Bar Code Scanner Wedge Bar code scanner wedge settings (bar code scanner grid and label encoding) Magstripe Reader Wedge Magstripe Reader Grid Core Messaging Service Menu Core Messaging Service Options Parameters You Can Configure Server IP Server IP (read-only) Associated Server IP Associated server IP Broadcast Name Broadcast name Port Port (r
Chapter 6 — Configure the Computer Location Services Menu Location Services Options Parameters You Can Configure Server Server settings (port and enable server) Virtual GPS Virtual GPS settings RFID Menu RFID Options Parameters You Can Configure Enable RFID Service Enable or disable RFID Service Application Connection • • • • • • • Reader 1 Allow external BRI Connections BRI TCP Port Enable Logging Enable Reader Connected Reader Model RFID Module For more information on all parameters in Inte
Chapter 6 — Configure the Computer Enable Intermec Settings Password You can protect Intermec Settings from other users by enabling a password. 1 Start Intermec Settings. 2 Tap Menu > Enter Password. 3 Select the Enable password checkbox. 4 Type your password in the Enter: text box. 5 Retype your password in the Confirm: text box. 6 (Optional) Select the Use password to protect CAB Installation if you want to restrict the installation of .cab files. 7 Tap OK.
Chapter 6 — Configure the Computer Restore Default Settings to a Menu You can restore the items in a single menu to their default settings. 1 Navigate to the menu that you want to restore to defaults. 2 Tap Menu > Restore Menu Defaults. 3 When prompted, tap Yes to restore the menu default settings. 4 If prompted to refresh the computer, tap Yes. Restore Default Settings for All Parameters You can restore all Intermec Settings parameters to their default settings. 1 Tap Menu > Restore All Defaults.
Chapter 6 — Configure the Computer Use Intermec Settings Remotely with SmartSystems Your mobile computer is SmartSystems-enabled, which lets you open Intermec Settings from the SmartSystems console to remotely configure all of your mobile computers. For more information about SmartSystems, see “Manage the Computer Using SmartSystems” on page 110. 1 In the SmartSystems console, select a mobile computer and right-click. 2 From the menu, select Intermec Settings. 3 Configure the settings you need to change.
Chapter 6 — Configure the Computer About Network Communications You can easily add the mobile computer to your wireless or wired data collection network. You can connect your computer using: • • • • 802.11a/b/g/n radio communications. Ethernet communications. Bluetooth communications. USB and serial communications. Configure 802.11a/b/g/n (Wi-Fi) Radio Communications The mobile computer contains an 802.11 radio to transfer data using wireless communications and to support the TCP/IP network protocols.
Chapter 6 — Configure the Computer 2 Connect the Ethernet cable from your network to the snap-on adapter or dock. Ethernet communications are automatically enabled on your mobile computer. 3 Make sure that your computer is communicating with the network. The network connection icon ( ) should appear on the title bar. Configure Bluetooth Communications Your mobile computer is Bluetooth™-enabled, which lets you connect to other Bluetooth devices, such as scanners, printers, or audio devices.
Chapter 6 — Configure the Computer 4 Tap OK. The Bluetooth radio maintains its state through a reboot or cold boot and maintains virtual COM ports. But, if you clean boot your computer you need to recreate pairings to devices. Connect to a Bluetooth Scanner You can connect the computer to an Intermec Bluetooth scanner, such as the SF51 or SR61. 1 Tap Start > Settings > System > Wireless Scanning.
Chapter 6 — Configure the Computer 2 Tap Add Device. 3 Select Quick Connect, Search, or Manual. Follow the onscreen instruction to add a wireless scanner. Connect to a Bluetooth Printer To configure your computer for Bluetooth wireless printing, you need to: • • create an application that opens the wireless printing COM port on your computer. For help, see the Bluetooth Resource Kit, which is part of the Intermec Developer Library (IDL), available from the Intermec website at www.intermec.com/idl.
Chapter 6 — Configure the Computer 1 Tap Start > Settings > System > Wireless Printing. 2 Tap Search to find a printer, or tap Manual to enter a device address. Follow the onscreen instructions to select the current wireless printer. 3 (Optional) Tap Print Test Page. The printer prints out a test page.
Chapter 6 — Configure the Computer Connect to a Bluetooth Audio Device Use the Bluetooth Audio enabler to discover, activate, and connect to Bluetooth audio devices such as a headset. This enables system sounds to be monitored through the headset. 1 Tap Start > Settings > System > Bluetooth Audio. 2 Tap Search to find your Bluetooth headset or hands-free device. 3 Select your device from the list and configure any settings. 4 Click OK when you are done.
Chapter 6 — Configure the Computer About Serial and USB Communications You can use these 70 Series accessories to transmit data to and receive data from another device through serial or USB communications: • RS-232 Snap-On Adapter (Model 1000AA03) • USB Snap-On Adapter (Model 1000AA07) For more information about these accessories and how to order them, see “70 Series Accessories” on page 8.
Chapter 6 — Configure the Computer Create an ISP Connection You can create an Internet Service Provider (ISP) connection to send and receive email messages using Messaging (Outlook Email) and view web pages using Internet Explorer Mobile. You need to get your ISP dial-up access telephone number, a user name, and a password from your ISP. 1 Tap Start > Settings > Connections > Connections. 2 Under My ISP, tap Add a new modem connection. 3 Enter a name for the connection, such as “ISP Connection.
Chapter 6 — Configure the Computer 11 When the Enable Dialing Rules box appears, tap OK. 12 Tap Edit. 13 In the Name field, enter your phone type (Home, Mobile, or Work). 14 Tap OK until you exit the Connections screen. Create a VPN Server Connection You can create a Virtual Private Network (VPN) connection to securely connect to servers, such as a corporate network, through the Internet.
Chapter 6 — Configure the Computer About Wireless Security The computer provides five types of security for your wireless network: • • Wi-Fi Protected Access 2 (WPA2™) Wi-Fi Protected Access (WPA) • 802.1x • LEAP • WEP This section explains how to configure wireless security on your mobile computer. Intermec recommends that you implement WPA2 security using PSK (Personal) or 802.1X (Enterprise) key management as appropriate.
Chapter 6 — Configure the Computer Choose Between Microsoft and Funk Security The computer supports both Funk and Microsoft security, which dynamically select wireless networks based on your preferences. The option you choose depends on your network security needs. • If you are using the computer in a static environment that requires a high level of security, you should use Funk security, which offers CCX v4.0 compliance, support for LEAP and TTLS, and configuration for up to four profiles.
Chapter 6 — Configure the Computer Configure WPA or WPA2 Enterprise (802.1x) Security with Funk Use these procedures to set WPA-802.1x or WPA2-802.1x security on your computer with Funk security. 1 Make sure the communications and radio parameters on your 70 Series are configured. 2 Make sure Funk is selected as your security choice. 3 Start Intermec Settings. 4 Select Communications > 802.11 Radio > Funk Security. 5 Select the profile you want to configure. 6 For Association, select WPA or WPA2.
Chapter 6 — Configure the Computer Configure WPA or WPA2 Personal (PSK) Security with Funk Use the following procedure to configure WPA-PSK or WPA2-PSK with Funk security. 1 Make sure the communications and radio parameters on your computer are configured. 2 Make sure Funk is selected as your security choice. 3 Start Intermec Settings. 4 Select Communications > 802.11 Radio > Funk Security. 5 Select the profile you want to configure. 6 For Association, select WPA or WPA2. 7 For 8021x, select None.
Chapter 6 — Configure the Computer 8 For 8021x, select TTLS, PEAP, or TLS. 9 If you selected TTLS or PEAP: a Enter a User Name. b For Prompt for Credentials, select Enter credentials now. c Enter a User Password. d For Validate Server Certificate, select Yes. 10 If you select TLS: a Load a user and root certificate on your computer. For help, see “Load a Certificate” on page 106. b For Validate Server Certificate, select Yes. c Enter a User Name and Subject Name. 11 Save your settings.
Chapter 6 — Configure the Computer Configure Static WEP Security with Funk Security Use the following procedure to configure static WEP security with Funk. Intermec recommends that you use WPA2-PSK instead of WEP if possible. 1 Make sure the communications and radio parameters on your computer are configured. 2 Make sure Funk is selected as your security choice. 3 Start Intermec Settings. 4 Select Communications > 802.11 Radio > Funk Security. 5 Select the profile you want to configure.
Chapter 6 — Configure the Computer Use Open (No Security) Associations with Funk Use the following procedure to configure your mobile computer for open security using Funk. 1 Start Intermec Settings. 2 Select Communications > 802.11 Radio > Funk Security. 3 Select the active profile you are using. 4 For Association, select Open. 5 For Encryption, select None. 6 Tap OK. Your settings are saved. Select Microsoft as Your Security Choice The default security setting is Funk.
Chapter 6 — Configure the Computer Configure WPA or WPA2 Enterprise (802.1x) Security with Microsoft Use these procedures to set WPA-802.1x security on your computer with Microsoft security. 1 Make sure the communications and radio parameters on your computer are configured. 2 Start Intermec Settings. 3 Select Communications > 802.11 Radio > Microsoft Security. 4 For Infrastructure Mode, select Infrastructure. 5 For Network Authentication, select WPA or WPA2.
Chapter 6 — Configure the Computer Enable WPA or WPA2 Personal (PSK) Security with Microsoft Use the following procedure to enable WPA-PSK with Microsoft Security. 1 Make sure the communications and radio parameters on your computer are configured. 2 Start Intermec Settings. 3 Select Communications > 802.11 Radio > Microsoft Security. 4 For Infrastructure Mode, select Infrastructure. 5 For Network Authentication, select WPA-PSK. Data Encryption automatically defaults to TKIP for WPA and AES for WPA2.
Chapter 6 — Configure the Computer 8 If you selected TLS: a Load a user and root certificate on your computer. For help, see “Load a Certificate” on page 106. b Select Properties. The Certificates dialog box appears. c Select the certificate you want to use from the list. The User Logon dialog box appears. d Enter a User Name and Domain and tap OK. e Tap OK to exit the Certificates dialog box. f Press OK to save the Microsoft Security settings.
Chapter 6 — Configure the Computer 7 For Network Key Value, enter an ASCII key or a hex key that is either 5 bytes or 13 bytes long depending on the capability of the radio. Set a 5-byte value for 64-bit WEP or a 13-byte value for 128-bit WEP. Hex keys must be preceded by 0x and contain 5 or 13 hex pairs. 8 For Network Key Index, select the key you want to use for data transmission. 9 Save your settings.
Chapter 6 — Configure the Computer Load a Certificate To use transport layer security (TLS) with WPA or 802.1x security, you need a unique client certificate on the computer and a trusted root certificate authority (CA) certificate. Certificates are pieces of cryptographic data that guarantee a public key is associated with a private key. They contain a public key and the entity name that owns the key. Each certificate is issued by a certificate authority. 1 Start Intermec Settings.
Chapter 6 — Configure the Computer 5 To import user and root certificates from a Microsoft IAS server: a Tap Import Certificates. b Tap Web Enrollment. c Enter the User, Password, and Server (IP address) to log into the server. d Tap OK. A dialog box appears asking if you want to load the root certificate. e Tap OK. The Enrollment Tool message box appears telling you that the certificate has been added. f Tap OK to close the message box.
Chapter 6 — Configure the Computer 108 70 Series Mobile Computer User Manual
7 Manage the Computer Use this chapter to learn how to remotely update, configure, and monitor your Intermec mobile computers. You will also find information on installing and developing software applications as well as how to upgrade the system software.
Chapter 7 — Manage the Computer Manage the Computer in Your Network When you have multiple mobile computers and peripherals in your network, it is essential to have an easy way to manage updates, configure all of the devices, and remotely troubleshoot problems. Intermec provides a free device management software platform called SmartSystems to help you manage your devices. You can also purchase third-party device management software through a vendor.
Chapter 7 — Manage the Computer Through the console, you can: drag-and-drop configuration bundles, operating system updates, and firmware upgrades to multiple computers. • save configuration settings from a single device and deploy those settings to many devices simultaneously. • remotely change settings on SmartSystems-enabled computers and peripherals. The SmartSystems console can report on asset locations and battery status, making it easier to manage your mobile devices.
Chapter 7 — Manage the Computer Develop RFID Applications If you want to develop RFID applications, use the Basic Reader Interface (BRI). For more information, see the Basic Reader Interface Programmer’s Reference Manual. Package Your Application For very simple applications, the executable file may be the only file you need to deploy. More typically, you will have a set of files to install. Intermec recommends using .cab files to install your applications. The computer uses standard Windows Mobile .
Chapter 7 — Manage the Computer Install Applications Using SmartSystems Console You can use the SmartSystems console to drag-and-drop Intermec applications onto your mobile computer. The console is part of SmartSystems. 1 Download your application file from the Intermec website and unzip it on your desktop PC. 2 Double-click the application file to install it. The application file should appear in the Software Vault.
Chapter 7 — Manage the Computer Launch Applications Automatically There are two ways to launch an application automatically on a cold boot: Set up your .cab file to place a shortcut to the application in the \Windows\StartUp directory at install time. • Use AutoRun.exe to start your application at boot time. AutoRun ships on the computer and automates other operations. At boot time, AutoRun executes any commands found in its data file, Autouser.dat. For more information on how to use the AutoRun.
Chapter 7 — Manage the Computer After you have located these items, you can update your mobile computer using SmartSystems. 1 Open the SmartSystems console. 2 Make sure the mobile computer is discovered. 3 Make sure the mobile computer is in a powered dock or that power management is disabled. 4 Download the SmartSystems bundle to your PC. 5 Double-click the SmartSystems bundle on your PC to extract the update files to the software vault.
Chapter 7 — Manage the Computer Update Individual Mobile Computers Using a microSD Card You can transfer upgrade bundles from your desktop PC to your mobile computer using a storage card. Before you can update your mobile computer, you need: the SmartSystems bundles you want to install. These SmartSystems bundles are available from the Intermec website at www.intermec.com. Go to Support > Downloads > OS/Firmware/Drivers list. • the SmartSystems bundles you want to install.
8 Troubleshoot and Maintain the Computer If you encounter any problems while using the 70 Series computer, look in this chapter to find a possible solution. You will also find information on routine maintenance.
Chapter 8 — Troubleshoot and Maintain the Computer About the Intermec Dashboard The Intermec Dashboard is designed to provide proactive monitoring of your mobile computers to prevent downtime. You can easily see the health of the device and can help pinpoint the source of a problem to determine if it is hardware or software related. Intermec Dashboard displays information such as the status of network connections, battery usage, storage space, and internal devices.
Chapter 8 — Troubleshoot and Maintain the Computer Troubleshoot Your Mobile Computer Use the troubleshooting tables in this section to fix problems with the Wi-Fi connection, 802.1x security, the imager, or general problems with operating the mobile computer. If you send the computer in for service, it is your responsibility to save the computer data and configuration. Intermec is responsible only for ensuring that the hardware matches the original configuration when repairing or replacing the computer.
Chapter 8 — Troubleshoot and Maintain the Computer Problems with the Wi-Fi Connection Problem Solution A network connection icon appears in The computer may not be communicating with the the toolbar, but then disappears. intended access point. Make sure the network name matches the access point network name. Default network name is “INTERMEC.” The access point may not be communicating with the server. Ensure the access point is turned on, properly configured, and has 802.1x security enabled.
Chapter 8 — Troubleshoot and Maintain the Computer Check 802.11 Network Status If you have trouble connecting to your 802.11 wireless network: Make sure you have correctly set network parameters on the computer. • Check your wireless security settings. Follow the next procedure to verify available access points and networks, check signal strength, and view other diagnostics.
Chapter 8 — Troubleshoot and Maintain the Computer 4 Tap the Ping tab to run a ping test to the host. a In the Host field, enter the IP address of the host. b From the Repetitions list, choose the number of times the computer will ping the host. c Tap Ping. The graph shows the amount of time it takes for the host to return the ping. Tap List to see this information in a list format. 5 Tap the RSSI tab to view the received signal strength of the host signal.
Chapter 8 — Troubleshoot and Maintain the Computer Troubleshoot Reading Bar Codes Use this section to troubleshoot problems that may prevent you from being able to read a bar code, such as the symbology not being enabled. Problems Reading Bar Codes Problem Solution You cannot see the illumination beam or frame from the imager when you press the Scan button and aim the imager at a bar code label. • You may be too far away from the bar code label. Try moving closer to the bar code label and scan it again.
Chapter 8 — Troubleshoot and Maintain the Computer Problems Reading Bar Codes (Continued) Problem Solution The scanner does not read the bar The scanner window may be dirty. Clean the window with a solution of ammonia and water. Wipe dry. Do not allow code labels quickly, or the scanning beam seems to be faint or abrasive material to touch the window. obscured. You scan a valid bar code label to enter data for your application.
Chapter 8 — Troubleshoot and Maintain the Computer Troubleshoot Operating the Computer Use this section to troubleshoot problems that may prevent you from being able to operate the computer. Problems Operating the Computer Problem Solution You press the Power button Try the following solutions: and nothing happens. • Replace or charge the battery. The battery may be completely drained. • Remove the battery and press the Reset button to perform a cold boot.
Chapter 8 — Troubleshoot and Maintain the Computer Troubleshoot RFID Problems Use this section to troubleshoot problems that may prevent you from using the Intermec RFID Demo application. Problems while working with RFID Problem Solution Intermec RFID Try the following solutions: Demo fails to start. • Verify that the RFID option is enabled in Intermec Settings. • If RFID is enabled, then select Application Connection and verify that the Reader is On and Reader Model is 70-Series RFID (IM11).
Chapter 8 — Troubleshoot and Maintain the Computer Call Product Support If you cannot find the answer to your problem in the “Troubleshoot Your Mobile Computer” on page 119, visit the Intermec technical knowledge base (Knowledge Central) at intermec.custhelp.com to review technical information or to request technical support. If you still need help after visiting Knowledge Central, you may need to call Product Support. To talk to an Intermec Product Support representative, call 1-800-755-5505.
Chapter 8 — Troubleshoot and Maintain the Computer Reset the Computer If the computer does not resume after pressing the Power button, or if the computer or an application locks up, you may need to reset the computer. The computer uses the configuration currently saved in flash memory during the boot process.
Chapter 8 — Troubleshoot and Maintain the Computer Location of CN70/CN70e Reset Button Reset button Location of CK70/CK71 Reset Button Reset button 4 Replace the battery and the handstrap. 5 Press Power and wait while the mobile computer boots. When the cold boot is complete, the Home screen appears.
Chapter 8 — Troubleshoot and Maintain the Computer Clean Boot the Computer A clean boot erases the memory in the mobile computer, including all applications and data files, with the exception of those found in the Flash File Store, or any removable storage. If the computer seems to be locked up, try cold booting it. If this process does not work, use a clean boot to get the computer up and running for further troubleshooting. You can perform a clean boot using the mobile computer.
Chapter 8 — Troubleshoot and Maintain the Computer Clean the Computer To keep the computer in good working order, you may need to clean the imager window, color camera window, and the touch screen. Clean the windows and the touch screen as often as needed for the environment in which you are using the computer.
Chapter 8 — Troubleshoot and Maintain the Computer 4 Wipe dry with a clean, soft, dry cloth. 5 Allow the computer to fully air dry before using it.
A Specifications and Default Settings 133
Appendix A — Specifications and Default Settings Physical and Environmental Specifications CN70 and CN70 RFID Physical Dimensions Dimensions 16.9 x 8.0 x 3.4 cm (6.66 x 3.14 x 1.35 in) Weight 450 g (15.9 oz) with battery CN70e and CN70e RFID Physical Dimensions Dimensions 19.5 x 8.0 x 3.4 cm (7.66 x 3.14 x 1.35 in) Weight 491 g (17.3 oz) with battery CK70 and CK70 RFID Physical Dimensions Dimensions 23.7 x 8.0 x 4.3 cm (9.33 x 3.16 x 1.
Appendix A — Specifications and Default Settings RFID Transceiver Specifications Channel operation supported 865-868 MHz band (Europe) 902-928 MHz bands (varies by country, contact your local Intermec sales office for details) Frequency range 865.6-867.6 MHz, or 902-928 MHz Output power Maximum: 10.5-29.
Appendix A — Specifications and Default Settings 70 Series Non-Incendive Computer Specifications The 70 Series mobile computers with non-incendive (NI) certification comply with the following specifications for North America and Canada regions only. Location Suitable for use in Division 2 locations Safety cULus Listing - ISA/ANSI 12.12.
Appendix A — Specifications and Default Settings Back Accessory Interface Pin-outs The back accessory interface provides power for peripheral devices out the back of the CK70 and CK71 computers.
Appendix A — Specifications and Default Settings Wireless LAN Standards compliant IEEE 802.11a/b/g/n (2.4 GHz and 5 GHz), Single Stream Data rates up to 72Mbps Security 802.11i, WPA, WPA2, 802.1x (EAP-TLS, TTLS, PEAP, EAP-FAST), WEP Certifications WPA2™ (Enterprise, Personal), WPA™ (Enterprise, Personal), Wi-Fi, WMM®, WMM Power Save, Cisco Compatible Extensions (CCX 4.
Appendix A — Specifications and Default Settings Supported Bar Code Symbologies (Continued) GS1 DataBar Expanded Telepen GS1 DataBar Limited TLC 39 GS1 DataBar Omni-Directional Imager Reading Distances Typical reading distances are done in an office environment using office lights (4 lux). Minimum distances are measured in the dark (0 lux). Both reading distances are provided in respective scan engine integration guides. Contact your local Intermec representative for more information.
Appendix A — Specifications and Default Settings EA30 Typical Reading Distances - Extended Reading Range Activated 0" 4" 8" 12" 16" 20" 24" 28" 32" 36" 40" in 12" 30 Data Matrix 10 mils 8" 20 PDF417 10 mils 4" 10 0" 0 4" 10 0.125mm/5 mils EAN/UPC 8" 20 0.5 mm / 20 mils 12" 30 1 mm / 40 mils cm 0 10 20 30 40 50 60 70 80 90 100 EA30 Typical Reading Distances - Extended Reading Range Activated Minimum Distance Symbology Density Code 39 0.125 mm/5 mils 6.50 cm/2.
Appendix A — Specifications and Default Settings EA30 Area Imager Minimum Reading Distances Minimum distances are measured in the dark (0 lux). 0" 4" 8" 12" 16" 20" 24" 28" in 12" 30 Data Matrix 10 mils 8" 20 PDF417 10 mils 4" 10 0" 0 4" 10 0.125mm/5 mils EAN/UPC 8" 20 0.5 mm / 20 mils 12" 30 1 mm / 40 mils cm 0 10 20 30 40 50 60 70 EA30 Minimum Reading Distances Symbology Density Minimum Distance Maximum Distance Code 39 0.1 mm (4 mils) 0.1250 mm (5 mils) 0.
Appendix A — Specifications and Default Settings EX25 Near-Far Range Imager Minimum Reading Distance Minimum reading distances are measured in the dark (0 lux). The following graphic does not include the 0.24 cm (0.09 in) setback for the CK71. 0” 16” 32” 48” 64” 80” 96” 112” 128” 144” 160” 176” in 80” 200 64” 160 100% EAN contrast UPC 48” 120 32” 80 16” 40 0” 0 16” 40 32” 80 0.25 mm/10 mils 48” 120 0.5 mm/20 mils 1 mm/40 mils 64” 160 1.
Appendix A — Specifications and Default Settings EX25 Near-Far Range Imager Typical Reading Distance Typical reading distances are measured in an office environment (200 lux). The following graphics do not include the 0.24 cm (0.09 in) setback for the CK71. EX25 Near-Far Range Imager 1D Typical Reading Distances 0” 40” 80” 120” 160” 200” 240” 280” 320” 360” 400” 440” 480” in 160” 400 128” 320 100% EAN contrast UPC 96” 240 64” 160 32” 80 0” 0 32” 80 0.25 mm 10 mils 160 64” 0.
Appendix A — Specifications and Default Settings EX25 1D Symbologies Typical Reading Distances with 0.24 cm (0.09 in) Setback Symbology Density Minimum Distance Maximum Distance Code 39 0.25 mm (10 mils) 0.5 mm (20 mils) 1 mm (40 mils) 1.4 mm (55 mils) 2.5 mm (100 mils) 15 cm (5.91 in) 16 cm (6.30 in) 25 cm (9.84 in) 40 cm (15.75 in) ** 135 cm (53.15 in) 280 cm (110.24 in) 550 cm (216.54 in) 720 cm (283.46 in) 1200 cm (472.44 in) Code 128 2.5 mm (100 mils) ** retro-reflective 1300 cm (511.
Appendix A — Specifications and Default Settings EX25 2D Symbologies Typical Reading Distances with 0.24 cm (0.09 in) Setback Symbology Density Minimum Distance Maximum Distance DataMatrix 0.25 mm (10 mils) 0.76 mm (30 mils) 1.4 mm (55 mils) 2.5 mm (100 mils) 7.5 mm (300 mils) 15 cm (5.91 in) 25 cm (9.84 in) ** ** 20 cm (7.87 in) 90 cm (35.43 in) 310 cm (122.05 in) 450 cm (177.17 in) 1100 cm (433.07 in) 1524 cm (600 in) ** Minimum distance depends on bar code width and scan angle.
Appendix A — Specifications and Default Settings Minimum reading distances are measured in the dark (0 lux). White Illumination Monocolor Sensor Only - Guaranteed Specifications Symbology Near Distance Far Distance Delta 5 mil Code39/128 14.7 cm/5.8 in 21.6 cm/8.5 in 6.9 cm/2.7 in 7.5 mil Code 39/128 11.2 cm/4.4 in 31.0 cm/12.2 in 19.8 cm/7.8 in 10 mil Code 39/128 8.1 cm/3.2 in 38.9 cm/15.3 in 30.7 cm/12.1 in 15 mil Code 39/128 5.1 cm/2.0 in 46.5 cm/18.3 in 41.4 cm/16.
Appendix A — Specifications and Default Settings Minimum reading distances are measured at 535 lux. White Illumination Monocolor Sensor Only- Typical Specifications Symbology Near Distance Far Distance Delta 10 mil Code 39/128 6.1 cm/2.4 in 42.7 cm/16.8 in 36.6 cm/14.4 in 15 mil Code 39/128 3.8 cm/1.5 in 54.9 cm/21.6 in 51.1 cm/20.1in 100% UPC 6.1cm/2.4 in 53.3 cm/21.0 in 47.2 cm/18.6 in 10 mil PDF417 5.6 cm/2.2 in 39.6 cm/15.6 in 34.0 cm/13.4 in 32 mil Maxicode 7.9 cm/3.1 in 52.8 cm/20.
Appendix A — Specifications and Default Settings Default Configuration The following tables list the default values of the configuration settings supported on the mobile computer. If you restore the mobile computer to factory default settings, the mobile computer uses these values. The settings are grouped by function and reflect the organization of Intermec Settings. Not all of the configuration settings are listed in this appendix.
Appendix A — Specifications and Default Settings Symbology Settings (Continued) Symbology Default Value DataMatrix Enable DutchPost Disable EAN/UPC Enable UPC A, UPC E, EAN 8, EAN 13 GS1 Composite Disable GS1 DataBar Expanded Disable GS1 DataBar Limited Disable GS1 DataBar Omni-Directional Disable HanXin Disable Infomail Disable Intelligent Mail Disable Interleaved 2 of 5 Disable JapanPost Disable Matrix 2 of 5 Disable Maxicode Disable Micro PDF417 Disable MSI Disable PDF4
Appendix A — Specifications and Default Settings Symbology Option Settings Symbology Option Settings Default Value Preamble None (Disabled) Postamble None (Disabled) Symbology Identifier Disable Multicode Disable Scanner Settings Scanner Settings Default Value Trigger Predefined Modes Level Trigger Mode Level Aimer Mode Typical aimer Hardware Trigger Enable Trigger Timeout (sec) 2 Aiming Duration (msec) 500 Turn Off After Good Read Enable/One-shot Auto-Trigger delay (msec) 0 Ima
Appendix A — Specifications and Default Settings Decode Security Settings Decode Security Settings Default Value Consecutive Data Validation 0 Identical Consecutive Timeout 300 ms Different Consecutive Timeout 0 Center Decoding Disable Center Decoding Tolerance 0 Communications Settings Use communications settings to configure how the mobile computer communicates with the network.
Appendix A — Specifications and Default Settings Ethernet Adapter Settings Ethernet Adapter Setting Default Value Current Device IP Address 0.0.0.0 DHCP Enabled DHCP Client Identifier Null IP Address Null Subnet Mask 255.255.255.
Appendix A — Specifications and Default Settings Device Settings Use device settings to configure settings on the mobile computer.
Appendix A — Specifications and Default Settings Sound Settings Sound Setting Default Value Beeper and Voice High Headset Beeper Very Low Good Read Vibrate Intensity 1 Strong Pulse Screen Taps Off Key Clicks Off Keypad Settings Keypad Setting Default Value Button Remapping Scanner • • • • • • • RFID Handle Trigger RFID Center Scan Button Basic Reader Interface Left Side Upper Button Notes Left Side Lower Button Camera Flashlight Timeout 1 Minute Right Side Upper Button Volume Up
Appendix A — Specifications and Default Settings Language Setting Language Setting Default Value Save Current Language when Updating OS Disabled Profiles Settings Application Profiles Settings Default Value Camera Disable Camera Scan Enable Camera Scan Show Option in Profile Settings Show Option in Profile Settings Power Always On Maximize Battery Life Normal Show Option in Profile Settings Show Option in Profile Settings Show Option in Profile Settings Scanning 1D Bar Codes Optimized Bright Sunl
Appendix A — Specifications and Default Settings Core Messaging Service Settings Use core messaging service settings to configure the message routers between client and server software applications. Core Messaging Service Settings Core Messaging Service Setting Default Value Associated Server IP Null Broadcast Name INTERMEC Port 62241 Keep Alive Ping Interval 30 Seconds Device Monitor Settings Use device monitor settings to configure how the mobile computer monitors the network.
Appendix A — Specifications and Default Settings Device Wipe Device Wipe Setting Default Value Enable Wipe Disabled Interval (in days) 3 Virtual Wedge Settings Use virtual wedge settings to configure the virtual wedge.
Appendix A — Specifications and Default Settings RFID Settings Use RFID settings to configure the RFID reader.
Appendix A — Specifications and Default Settings RFID Settings (Continued) RFID Setting Default Value Lock Tries 3 Select Tries 1 Unselect Tries 1 Initial Q 4 Field Strength dB 30 Session 2 Enable Antenna Port 1 On Bluetooth Power Off 70 Series Mobile Computer User Manual 300 159
Appendix A — Specifications and Default Settings 160 70 Series Mobile Computer User Manual
B Keypads and Keystrokes 161
Appendix B — Keypads and Keystrokes Standard Characters Use the following tables to learn how to enter standard and other available characters and functions with the keypad. If there is no sequence of keystrokes for a particular character or function, it is only available through the soft input panel (SIP), which you can access by tapping the keyboard icon on the touch screen. Note: You can only enter “*” and “#” characters in the phone or contacts applications.
Appendix B — Keypads and Keystrokes Character Numeric Keypad QWERTY Keypad n c66 c666 c7 c77 c777 c7777 c8 c88 c888 c9 c99 c999 c9999 c12 c122 c1222 c13 c133 c1333 c14 c144 N O P Q R S T U V W X Y Z yA yB yC yD yE yF yG yH o p q r s t u v w x y z A B C D E F G H 70 Series Mobile Computer User Manual 163
Appendix B — Keypads and Keystrokes Character Numeric Keypad QWERTY Keypad I c1444 c15 c155 c1555 c16 c166 c1666 c17 c177 c1777 c17777 c18 c188 c1888 c19 c199 c1999 c19999 0 1 2 yI yJ yK yL yM yN yO yP yQ yR yS yT yU yV yW yX yY yZ b, bY bU J K L M N O P Q R S T U V W X Y Z 0 1 2 164 70 Series Mobile Computer User Manual
Appendix B — Keypads and Keystrokes Character Numeric Keypad QWERTY Keypad 3 3 4 5 6 7 8 9 bI bH bJ bK bB bN bM 4 5 6 7 8 9 CN70 Characters and Functions To Enter Numeric Keypad QWERTY Keypad @ (at symbol) N/A & (ampersand) N/A * (asterisk) * : (colon) N/A , (comma) N/A $ (dollar) N/A ! (exclamation) N/A - (hyphen) - % (percent) N/A . (period) . b# bQ bS bC bD bX bE bO bG bR .
Appendix B — Keypads and Keystrokes To Enter Numeric Keypad QWERTY Keypad ? (question mark) N/A ‘ (apostrophe) N/A Forward Tab j { u d l r c1 e b| b or c c0 | p w m bA bZ j { u d l r yy e bP b or y s | p w m Backspace Up Arrow Down Arrow Left Arrow Right Arrow CapsLock Enter ok Shift Space Esc Talk End Call Intermec Dashboard 166 70 Series Mobile Computer User Manual
Appendix B — Keypads and Keystrokes CN70e Keypads and Keystrokes CN70e Alphanumeric Characters Character Numeric Keypad a b c d e f g h i j k l m n o p q r s c2 c22 c222 c3 c33 c333 c4 c44 c444 c5 c55 c555 c6 c66 c666 c7 c77 c777 c7777 70 Series Mobile Computer User Manual Calculator-Style Keypad QWERTY Numeric Keypad c8 c88 c888 c9 c99 c999 c4 c44 c444 c5 c55 c555 c6 c66 c666 c1 c11 c111 c1111 A B C D E F G H I J K L M N O P Q R S 167
Appendix B — Keypads and Keystrokes Character Numeric Keypad t u v w x y z A B C D E F G H I J K L M N 168 c8 c88 c888 c9 c99 c999 c9999 c12 c122 c1222 c13 c133 c1333 c14 c144 c1444 c15 c155 c1555 c16 c166 Calculator-Style Keypad QWERTY Numeric Keypad c2 c22 c222 c3 c33 c333 c3333 c78 c788 c7888 c79 c799 c7999 c74 c744 c7444 c75 c755 c7555 c76 c766 T U V W X Y Z yA yB yC yD yE yF yG yH yI yJ yK yL yM yN 70 Series Mobile Computer User Manual
Appendix B — Keypads and Keystrokes Character Numeric Keypad O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 c1666 c17 c177 c1777 c1777 7 c18 c188 c1888 c19 c199 c1999 c1999 9 0 1 2 3 4 5 6 70 Series Mobile Computer User Manual Calculator-Style Keypad QWERTY Numeric Keypad c7666 c71 c711 c7111 c7111 1 c72 c722 c7222 c73 c733 c7333 c7333 3 0 1 2 3 4 5 6 yO yP yQ yR yS yT yU yV yW yX yY yZ 0 1 2 3 4 5 6 169
Appendix B — Keypads and Keystrokes Character Numeric Keypad 7 8 9 7 8 9 Calculator-Style Keypad QWERTY Numeric Keypad 7 8 9 7 8 9 CN70e Characters and Functions To Enter Numeric Keypad Calculator-Style Keypad @ (at symbol) N/A N/A & (ampersand) N/A N/A * (asterisk) * * : (colon) N/A N/A , (comma) N/A N/A $ (dollar) N/A N/A ! (exclamation) N/A N/A - (hyphen) - - % (percent) N/A N/A . (period) . b# .
Appendix B — Keypads and Keystrokes To Enter Numeric Keypad Calculator-Style Keypad QWERTY Numeric Keypad Up Arrow u d l r c1 e b| b or c c0 | p w m u d l r c7 e b| b or c c0 | p w m u d l r yy e b| b or y s | p w m Down Arrow Left Arrow Right Arrow CapsLock Enter ok Shift Space Esc Talk End Call Intermec Dashboard CK70 Keypads and Keystrokes CK70 Alphanumeric Characters Character Large Alpha Keypad Alphanumeric Keypad a A B C D A B C D b c d 70 Series Mobile Computer User Manual 171
Appendix B — Keypads and Keystrokes Character Large Alpha Keypad Alphanumeric Keypad e E F G H I J K L M N O P Q R S T U V W X Y E F G H I J K L M N O P Q R S T U V W X Y f g h i j k l m n o p q r s t u v w x y 172 70 Series Mobile Computer User Manual
Appendix B — Keypads and Keystrokes Character Large Alpha Keypad Alphanumeric Keypad z Z yA yB yC yD yE yF yG yH yI yJ yK yL yM yN yO yP yQ yR yS yT Z yA yB yC yD yE yF yG yH yI yJ yK yL yM yN yO yP yQ yR yS yT A B C D E F G H I J K L M N O P Q R S T 70 Series Mobile Computer User Manual 173
Appendix B — Keypads and Keystrokes Character Large Alpha Keypad Alphanumeric Keypad U yU yV yW yX yY yZ bP bD bE bF bG bH bI bK bL bM yU yV yW yX yY yZ 0 1 2 3 4 5 6 7 8 9 V W X Y Z 0 1 2 3 4 5 6 7 8 9 CK70 Characters and Functions To Enter Large Alpha Keypad Alphanumeric Keypad @ (at symbol) bS bW bO N/A & (ampersand) * (asterisk) 174 bU b0 70 Series Mobile Computer User Manual
Appendix B — Keypads and Keystrokes To Enter Large Alpha Keypad Alphanumeric Keypad : (colon) bJ cJ bT cS cW cX cO . bX bQ cQ cT bY cY cN bN bV cV b2 b5 cX ; (semicolon) , (comma) $ (dollar) ! (exclamation) - (hyphen or minus) % (percent) .
Appendix B — Keypads and Keystrokes To Enter Large Alpha Keypad Alphanumeric Keypad \ (backslash) cU bU c8 b8 bZ / (forward slash) “ (quotes) N/A ( (left parenthesis) bR cR bZ cZ bs ) (right parenthesis) Insert Delete Sym ¦ (broken vertical bar) N/A ̀ (grave) N/A Forward Tab j { u d l r yy e cm y s Backspace Up Arrow Down Arrow Left Arrow Right Arrow CapsLock Enter ok Shift Space 176 N/A N/A b4 b6 N/A cS cW j { u d l r yy e cm y s 70 Series Mobile Computer User Manual
Appendix B — Keypads and Keystrokes To Enter Large Alpha Keypad Alphanumeric Keypad Esc | | Alt N/A Alt Ctrl Ctrl Ctrl Send Call bA bC m c1 c3 m To Enter Large Alpha Keypad Alphanumeric Keypad F1 cD cE cF cG cH cI cK cL cM cP ¡ ¢ £ ¤ ¥ b¡ b¢ b£ b¤ b¥ bA bB bC bD End Call Intermec Dashboard CK70 Function Keys F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 N/A F12 N/A F13 N/A F14 N/A 70 Series Mobile Computer User Manual 177
Appendix B — Keypads and Keystrokes To Enter Large Alpha Keypad Alphanumeric Keypad F15 N/A F16 N/A F17 N/A F18 N/A F19 N/A F20 N/A F21 N/A F22 N/A F23 N/A F24 N/A bE bF bG bH bI bJ bK bL bM bN CK71 Keypads and Keystrokes CK71 Alphanumeric Characters Character Numeric with Function Keys Keypad Alphanumeric Keypad a b7 b8 b9 b4 b5 b6 b1 b2 A B C D E F G H b c d e f g h 178 70 Series Mobile Computer User Manual
Appendix B — Keypads and Keystrokes Character Numeric with Function Keys Keypad Alphanumeric Keypad i b3 b0 bb¡ b¢ b£ b¤ b¥ b¦ b§ b¨ b© bª b« b¬ bm b Ctrl b Alt by7 by8 by9 I J K L M N O P Q R S T U V W X Y Z yA yB yC j k l m n o p q r s t u v w x y z A B C 70 Series Mobile Computer User Manual 179
Appendix B — Keypads and Keystrokes Character Numeric with Function Keys Keypad Alphanumeric Keypad D by4 by5 by6 by1 by2 by3 by0 byby¡ by¢ by£ by¤ by¥ by¦ by§ by¨ by© byª by« by¬ bym yD yE yF yG yH yI yJ yK yL yM yN yO yP yQ yR yS yT yU yV yW yX E F G H I J K L M N O P Q R S T U V W X 180 70 Series Mobile Computer User Manual
Appendix B — Keypads and Keystrokes Character Numeric with Function Keys Keypad Alphanumeric Keypad Y b y Ctrl b y Alt 0 1 2 3 4 5 6 7 8 9 yY yZ 0 1 2 3 4 5 6 7 8 9 Z 0 1 2 3 4 5 6 7 8 9 CK71 Characters and Functions To Enter Numeric with Function Keys Keypad Alphanumeric Keypad : (colon) cs ; (semicolon) N/A , (comma) N/A b8 b5 cX $ (dollar) cS cW . ! (exclamation) - (hyphen or minus) . (period) 70 Series Mobile Computer User Manual N/A N/A cs .
Appendix B — Keypads and Keystrokes To Enter Numeric with Function Keys Keypad Alphanumeric Keypad + (plus) N/A ‘ (apostrophe) N/A = (equals) N/A _ (underscore) c- > (greater than) N/A < (less than) N/A [ (left square bracket) N/A ] (right square bracket) N/A { (left curly brace) N/A } (right curly brace) N/A ~ (tilde) N/A \ (backslash) c Alt c Ctrl bs bY bS cX cV bV bT cT bU cU bW c2 b2 bZ b4 b6 cS cW j { u / (forward slash) “ (quotes) N/A Insert bl c4 Delete ¦ (broken verti
Appendix B — Keypads and Keystrokes To Enter Numeric with Function Keys Keypad Alphanumeric Keypad Down Arrow d l r yy e cm y s | d l r yy e cm y s | b| Left Arrow Right Arrow CapsLock Enter ok Shift Space Esc Alt Alt Ctrl Ctrl Ctrl Intermec Dashboard m m To Enter Numeric with Function Keys Keypad Alphanumeric Keypad F1 ¡ ¢ £ ¤ ¥ ¦ § ¡ ¢ £ ¤ ¥ b¡ b¢ CK71 Function Keys F2 F3 F4 F5 F6 F7 70 Series Mobile Computer User Manual 183
Appendix B — Keypads and Keystrokes To Enter Numeric with Function Keys Keypad Alphanumeric Keypad F8 ¨ © ª « ¬ c¡ c¢ c£ c¤ c¥ c¦ c§ c¨ c© cª c« c¬ b£ b¤ b¥ bA bB bC bD bE bF bG bH bI bJ bK bL bM bN F9 F10 F11 F12 F13 F14 F15 F16 F17 F18 F19 F20 F21 F22 F23 F24 184 70 Series Mobile Computer User Manual
Appendix B — Keypads and Keystrokes CK71 Intermec Terminal Emulation (ITE) Keys To Enter Numeric with Function Keys Keypad Alphanumeric Keypad Attention c0 Autolog N/A Clear b6 Duplicate N/A EEOF N/A Erase N/A Find N/A Field + cx bx cA c¤ c6 cD c¥ cE cF c1 c1 cG b3 cI cH cK cM cO cN b9 c¡ c¢ Field Fieldmark N/A Help N/A Hex N/A Home c.
Appendix B — Keypads and Keystrokes To Enter Numeric with Function Keys Keypad Alphanumeric Keypad PA3 c3 cd c£ cd cP c7 cR c| ce c5 c8 cQ bd Page Print N/A Previous Screen c7 Remove N/A Reset c| ce c5 c8 br Return Roll Down Roll Up System Request View N/A View Down bd bu View Up 186 N/A N/A 70 Series Mobile Computer User Manual
C ScanNGo Wi-Fi Configuration Bar Codes You can use the ScanNGo Wi-Fi configuration bar codes to quickly configure the 802.11 radio in your computer.
Appendix C — ScanNGo Wi-Fi Configuration Bar Codes Radio Configuration Bar Codes Use the following ScanNGo bar codes to enable the 802.11 radio and set the defaults for either Funk or Microsoft Wireless Zero Configuration security. After you scan the bar codes, you will still need to use Intermec Settings or another configuration program to set network-specific settings on your computer and to configure the wireless security. The CN70, CN70e, and CK70 are available with the EA30 imager only.
Appendix C — ScanNGo Wi-Fi Configuration Bar Codes 2D Configuration Bar Codes You can configure the computer with a 2D imager (EA30 or EX25). 1 Scan the appropriate bar code from the table and wait for the program to start. 2 Follow any instructions on the device.
Appendix C — ScanNGo Wi-Fi Configuration Bar Codes 1D Imager Radio Configuration Bar Codes When You Want To: Scan This Bar Code • Set all communication settings to defaults (Wi-Fi, WWAN if applicable) • Enable Wi-Fi - set Funk defaults 190 70 Series Mobile Computer User Manual
Appendix C — ScanNGo Wi-Fi Configuration Bar Codes When You Want To: Scan This Bar Code • Set all communication settings to defaults (Wi-Fi, WWAN if applicable) • Enable Wi-Fi - set Funk defaults 70 Series Mobile Computer User Manual 191
Appendix C — ScanNGo Wi-Fi Configuration Bar Codes When You Want To: Scan This Bar Code • Set all communication settings to defaults (Wi-Fi, WWAN if applicable) • Enable Wi-Fi - set Microsoft WZC defaults 192 70 Series Mobile Computer User Manual
Appendix C — ScanNGo Wi-Fi Configuration Bar Codes When You Want To: Scan This Bar Code • Set all communication settings to defaults (Wi-Fi, WWAN if applicable) • Enable Wi-Fi - set Microsoft WZC defaults 70 Series Mobile Computer User Manual 193
Appendix C — ScanNGo Wi-Fi Configuration Bar Codes 194 70 Series Mobile Computer User Manual
I Index 195
Index Symbols .cab files, using to install applications 112 Numerics 70 Series computer models 2 features 5 802.11 communications, configuring 86 802.11 network status, troubleshooting 121 802.11 radio, default settings 151 802.
Index changing the battery 12 characters entering on CK70/CK71 keypad 25 entering on numeric keypad 24 entering on QWERTY keypad 24 entering with keystrokes 162– 186 charging accessories 12 CK70 keypads, illustrated 19, 21 keystrokes, listed 171–178 status LEDs 6, 7 CK70/CK71 battery, described 8 entering characters on keypad 25 magstripe reader adapter, described 8 CK71 keypads, illustrated 22, 23 keystrokes, listed 178–186 status LEDs 7 clean boot, performing 130 cleaning computer 131 CloneNGo using to ma
Index flick, screen gesture, described 42 Funk security configuring 802.1x 98 configuring LEAP 99 configuring static WEP 100 configuring WPA Enterprise (802.1x) 97 configuring WPA Personal (PSK) 98 configuring WPA2 Enterprise (802.
Index launching applications automatically 114 LEAP, configuring with Funk 99 LEDs battery status, described 15 status, described 7 location, status LEDs 7 locked computer, troubleshooting 125 M magstripe reader adapter, described 8 magstripe reader snap-on adapter, described 8 mass storage device, using computer as 38 memory, computer 136 microSD card installing in a CK70/CK71 36 installing in a CN70/CN70e 33 using to save pictures and videos 69 Microsoft security choosing 101 configuring 802.
Index Q QWERTY keypad CN70, illustrated 17 entering characters on 24 illustrated 16 QWERTY numeric keypad CN70e, illustrated 18 R Read an RFID Tag, RFID 51 reading distances EA30 area imager 139 EX25 imager 142 N5603 extended range imager 145 Ready-to-Work LED described 7 reboot performing 128 power option described 27 recording a video 69 regulatory approvals 138 reset button, location 128 performing 128 RFID applications, using with IF2 112 Demo application, about 51 Intermec Settings 77 RS-232 snap-on ad
Index storage, computer 136 Suspend, power option described 27 symbologies, supported 138 system software updating with SmartSystems Foundation 114 T terminal emulation, troubleshooting 119 tethered scanner, connecting 92 tethered stylus replacement kit, described 9 Tile bar described 40 illustration 40 Title bar described 40 illustration 40 status icon descriptions 42 transferring files, to and from PC 38 troubleshooting 119–124 802.11 network status 121 802.
Index W (continued) www.intermec.
by Honeywell 6001 36th Avenue West Everett, Washington 98203 U.S.A. tel 425.348.2600 fax 425.355.9551 www.intermec.com © 2014 Intermec by Honeywell All rights reserved.
