User's Manual CN3 Mobile Computer
Intermec Technologies Corporation Worldwide Headquarters 6001 36th Ave.W. Everett, WA 98203 U.S.A. www.intermec.com The information contained herein is provided solely for the purpose of allowing customers to operate and service Intermec-manufactured equipment and is not to be released, reproduced, or used for any other purpose without written permission of Intermec Technologies Corporation.
Document Change Record This page records changes to this document. The document was originally released as Version -001. Revision Letter Date Description of Change 002 01/2007 Added information about the InstallSelect application, the clean boot method, the color camera, and CDMA radios.
iv CN3 Mobile Computer User’s Manual
Contents Contents Before You Begin. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi Global Services and Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi Who Should Read This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents Using the Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Software Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SmartSystems Foundation Console (www.intermec.com/SmartSystems) . . . . . . . SmartSystems Platform Bundles (SSPB) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Intermec Resource Kits (www.intermec.com/IDL) . . . . . . . .
Contents Customizing Your Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Adjusting Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Adding or Removing Programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Microsoft ActiveSync. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 Microsoft Outlook Mobile . . . . . . . . . . . . . . . . . . .
Contents Excel Mobile. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Creating a Workbook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tips for Working in Excel Mobile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PowerPoint Mobile. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Windows Media Player for Windows Mobile . . . . . . . . . . . . . . . . . . . .
Contents Configuring the SF51 Cordless Scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Setting the Imager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Enabling Bluetooth. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Creating an SF51 Connection Label. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Viewing SF51 Scanner Information from Your Computer . .
Contents iConnect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No Networking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Wireless Communications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ping Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ISpyWiFi . . . . . . . . . . . . .
Before You Begin Before You Begin This section provides you with safety information, technical support information, and sources for additional product information. Safety Information Your safety is extremely important. Read and follow all warnings and cautions in this document before handling and operating Intermec equipment. You can be seriously injured, and equipment and data can be damaged if you do not follow the safety warnings and cautions.
Before You Begin Telephone Support These services are available from Intermec Technologies Corporation. In the U.S.A. and Canada, call 1-800-755-5505 and choose this option Service Description Order Intermec products • Place an order. • Ask about an existing order. Order Intermec media Order printer labels and ribbons. 1 and then choose 1 1 and then choose 2 Order spare parts Order spare parts 1 or 2 and then choose 4 Technical Support Talk to technical support about your Intermec product.
Before You Begin To download documents 1 Visit the Intermec web site at www.intermec.com. 2 Click Service & Support > Manuals. 3 In the Select a Product field, choose the product whose documentation you want to download. To order printed versions of the Intermec manuals, contact your local Intermec representative or distributor.
Before You Begin xiv CN3 Mobile Computer User’s Manual
1 Using the Computer This chapter introduces the CN3 Mobile Computer, developed by Intermec to enhance wireless connectivity needs and contains hardware and software configuration information to assist you in making the most out of your CN3. Note: Desktop icons and applet icons are shown to the left. Any place that Start is mentioned, tap the following Windows icon in the top, left corner of your CN3 desktop.
Chapter 1 — Using the Computer Introducing the CN3 Mobile Computer The Intermec CN3 Mobile Computer is a small, ergonomically designed mobile computer built on the Microsoftr Windowsr Mobile 5.0 operating system. It is a lightweight, easy-to-use, and runs most software developed for the Windows Mobile platform, including stand-alone, client-server, and browser-based applications.
Chapter 1 — Using the Computer Rear View Color camera and flash Rear Speaker Scanner Remappable scan buttons Stylus in holder Connector Microphone Battery With miniSD/SIM card door open Note that the scanner and the color camera cannot be on the same CN3.
Chapter 1 — Using the Computer Features The CN3 is available with the following: • 802.11b/g or WLAN radio • Bluetooth • 128MB RAM • QWERTY or numeric keypad • Imaging Options: • EA11 Standard Area Imager • EA11 High-Density (HD) Area Imager • Color Camera • Wireless Wide Area Network Options: • GSM/GPRS/EDGE • CDMA/1xRTT/EV-DO Use this manual to understand how to use the features and options available on the CN3. CN3s with an IEEE 802.
Chapter 1 — Using the Computer Resetting Your Computer When the CN3 completely stops responding, an application is locked up and does not respond, when you upgrade the firmware, or when you reflash the CN3, it may be necessary to perform a reset. Preferred Reset Method The recommended method in recovering the CN3 is to press and hold the power switch on the front of the CN3 for about 10 seconds. This performs a graceful system shutdown and no data is lost in the process.
Chapter 1 — Using the Computer To perform a clean-boot 1 Press the power switch to suspend the CN3. 2 Remove the battery pack from the back of the CN3. 3 With a stylus, press the reset button in the battery cavity in the back. 4 Press and hold the power switch as you put the battery back in the unit. 5 Continue to hold the power switch until a Warning message appears on the display, release the power switch, then read the message. 6 To continue with the clean-boot, press either right side button.
Chapter 1 — Using the Computer When a bar code label is successfully read, a high beep is emitted and the Scan LED lights briefly. Release the Scan button. Good Scan LED Improving the Performance of the Area Imager If you have problems scanning a bar code with the 2D imager, try following some of these tips to improve the performance of your imager: • Tap Start > Settings > the System tab > the Intermec Settings icon to access the applet.
Chapter 1 — Using the Computer Reading Distances Typical reading distances are done in an office environment using office lights (4 lux). Minimum distances are measured in the dark (0 lux). Both reading distances are provided in respective scan engine integration guides. Contact your Intermec representative for more information. The minimum standard reading distances for CN3s built with integrated scan engines are shown below. When correctly mounted, an exit window reduces reading distances by about 4%.
Chapter 1 — Using the Computer Using the Batteries The CN3 uses replaceable Lithium-Ion (Li-ion) batteries. Standard packs have 8.1 Watt hours capacity; and extended packs have 14.8 Watt hours capacity. You must fully charge the battery before you can use the CN3. When you change the battery, a super capacitor maintains your status, memory, and real-time clock for at least five minutes. The battery used in this device may present a fire or chemical burn hazard if it is mistreated.
Chapter 1 — Using the Computer The charge/operating power can be applied to the CN3 using an AC wall adapter, a magnetic card reader snap-on, a single dock with ac adapter or auto-lighter adapter attached, a multidock, either charge-only or Ethernet, or an auto lighter adapter. For information on these accessories, see “Accessories for the Computer” on page 26. Maximizing Battery Life Note that batteries are chemical devices.
Chapter 1 — Using the Computer To install the battery, insert the tabs on the charged battery into the CN3 and snap the battery into place. Checking the Battery Status The Battery Status LED above your CN3 display, as shown in the following illustration, indicates the status of your battery. See the following table to understand the meanings of the lights emitted from the LED. Battery Status LED Steady Green Battery is more than 95% charged and unit is on a charger. Blinking Red Battery is low.
Chapter 1 — Using the Computer Note: The Backup battery option shown in the Battery tab refers to the super capacitor used by the CN3 to store energy. Understanding the Low Battery Warnings When the battery charge is getting low (approximately 6.4 to 6.5V), you will receive an audible alert and an initial pop-up “Main Battery Low” warning message. If the warning is not dismissed, it is followed by another audible alert and a second pop-up “Main Battery Very Low” warning message.
Chapter 1 — Using the Computer 3 Tap the Volume icon at the top of the screen, tap On, then move the slider bar to your desired level. If your CN3 comes with a phone, then be sure to use the left slider bar for the volume for the rear speaker and the right slider bar for the phone via the front speaker. Volume slider bar Phone slider bar To disable the beeper • Tap the Volume icon, then drag the slider to the bottom, or tap Off. Note the change in the Volume icon.
Chapter 1 — Using the Computer Using the Color Camera The 1.3 megapixel color camera with flash is an optional feature that is factory-installed into the upper back of the CN3, as shown in the following illustration. You can take photos in either high-resolution or a compressed formats, with resolutions up to 1200x1024 pixels. Color Camera Flash Images are saved as .JPG files and stored in the “/My Documents/My Pictures” folder.
Chapter 1 — Using the Computer Using the screen display as a viewfinder, tap move the camera until you get the image you want, then press Enter or tap the screen to save the image, similar to the following: Go to “Configuring the Color Camera” on page 94 for information on configuring the color camera. Using the Intermec Settings Applet Use the Intermec Settings applet to gather, view, and update device configuration settings.
Chapter 1 — Using the Computer Using the Keypad Your CN3 has either the numeric keypad or the QWERTY keypad. QWERTY Keypad Numeric Keypad QWERTY Keypad The full alphabetic QWERTY keypad is for applications that require input of both alphabetic and numeric data. This keypad also provides special characters, symbols, and functions by pressing color-coded key sequences. Numeric Keypad The large numeric keypad is for applications that require mainly numeric data.
Chapter 1 — Using the Computer Using the Color-Coded Keys Each keypad available for the CN3 provides color-coded keys to let you access additional characters, symbols, and functions printed on the keypad overlay. Once you understand how to use the color-coded keys and key sequences, you can access all of the additional features printed on the keypad overlay. There are two color-coded modifier keys on the numeric keypad: the orange B key and the green C key.
Chapter 1 — Using the Computer QWERTY Characters (continued) To Enter Press the Keys To Enter Press the Keys + B [T] frown B [O] - B [G] = B [L] # B [V] ok B [P] Entering Characters on the Numeric Keypad On the numeric keypad, to type a lowercase “c,” press C [2] [2] [2]. To type a letter on the same key as the last letter entered, wait two seconds, then enter the correct series of keystrokes to create the next letter.
Chapter 1 — Using the Computer Using the Power Switch When you press the power switch, you actually suspend the CN3 and turn off the display and backlight. This helps to prolong battery life. Coming Out of the Idle Mode When there is no activity, the CN3 goes into idle mode or turns off the backlight after one minute. Press a key or tap the screen to resume activity. To change the time when to turn off the backlight 1 Tap Start > Settings > the System tab > the Backlight icon > the Battery Power tab.
Chapter 1 — Using the Computer Using the Screen The CN3 has a 3.5" diagonal, 240x320 pixel (QVGA) transflective TFT-LCD 64K color display. • The toolbar displays the Start flag, the connectivity icon, the volume icon, and the time and next appointment. • The desktop displays shortcuts to some of the applications installed on the CN3. • The taskbar displays the onscreen keyboard icon, Pocket PC links, and icons to any applications that are running, yet are hidden.
Chapter 1 — Using the Computer SmartSystems Platform Bundles (SSPB) SmartSystems Platform Bundles (SSPB) contains the Data Collection Engine (DCE), SmartSystems, Funk Supplicant, Intermec Settings, Intermec Developer Library (IDL) runtime, and other software. The SSPB is stored in the “\Flash File Store” folder off the root of your CN3 and automatically installed on the device when it is initially started up. Updated bundles are available as software downloads from the Intermec web site at www.intermec.
Chapter 1 — Using the Computer Adjusting the Volume The volume is enabled when you adjust the volume. You can control the volume by pressing the two scan buttons on the right side of the CN3 as shown above, using the Volume drop-down in the toolbar, or the Intermec Settings applet. In either situation, tap Off to disable the volume. To adjust the volume for the rear speaker 1 Tap the Volume icon at the top of the screen. 2 Tap On, then move the system volume slider to the desired volume level.
Chapter 1 — Using the Computer Using the Status LEDs The status LEDs above the display show the following information: Good Scan LED and Intermec Ready-to-Work Indicator Notification Battery Status LED The Battery Status LED on the right alerts you to the status of your battery using any of the following codes: LED Description Blinking Red Battery is low, needs charging Steady Red and CN3 is on external power Battery is charging Steady Red and CN3 is not on charge Software is not working properly Ye
Chapter 1 — Using the Computer Using the Storage Card The CN3 uses a miniSD card to increase file storage and install software. The miniSD card slot is located under a door that is beneath the battery pack. Remove the two screws holding the door to reach the miniSD card. You can corrupt your miniSD card if you do not follow these installation and removal procedures exactly.
Chapter 1 — Using the Computer Setting the Vibrator To set your CN3 to vibrate • Tap the Volume icon at the top of the screen, then tap Vibrate. If your CN3 has a built-in phone, this sets both the volume and the phone to vibrate. Note the icon change. To set the vibrate using the Intermec Settings applet 1 Tap Start > Settings > the System tab > the Intermec Settings icon. 2 Tap (+) to expand Device Settings > Beeper > Vibrate, then tap Vibrate. 3 To disable the vibrate, tap the Beeper option.
Chapter 1 — Using the Computer To set the vibrate using the Sounds & Notifications applet 1 Tap Start > Settings > the Personal tab > the Sounds & Notifications icon. 2 Tap the Notifications tab, then select from the Event list. 3 Check Vibrate, then tap ok to close. Wireless Network Support Radios are installed at the factory and cannot be installed by a user. The CN3 must be serviced to install or replace radios. Contact your Intermec representative for more information.
Chapter 1 — Using the Computer Physical and Environmental Specifications Physical Dimensions (excluding overmold) Length: Width: Height: Weight: 16.0 cm (6.3") 8.1 cm (3.2") 3.3 cm (1.3") with standard battery 2.8 cm (1.
Chapter 1 — Using the Computer Wireless LAN Standards Compliant: Data Rates: Radio Power Output: Security: Certifications: IEEE 802.11g (2.4 GHz - OFDM) IEEE 802.11b (2.4 GHz - DSSS) Up to 54 Mbps for 802.11g Up to 11 Mbps for 802.11b 100 mW WEP, WPA, 802.11i, 802.
2 Windows Mobile This chapter introduces Microsoft Windows Mobile 5.0 for Pocket PC. While using the CN3 Mobile Computer, keep these key points in mind: • Tap Start on the navigation bar, located at the top of the screen, to quickly move to programs, files, and settings. Use the command bar at the bottom of the screen to perform tasks in programs. The command bar includes menus, icons, and the onscreen keyboard. • Tap and hold an item to see a pop-up menu containing a list of actions you can perform.
Chapter 2 — Windows Mobile Software Builds See “Learning Software Build Versions” on page 4 to determine which Intermec build of Windows Mobile 5.0 is on your unit. Where to Find Information This chapter describes your CN3 hardware, provides an overview of the programs on your CN3, and explains how to connect your CN3 to a desktop, a network, or the Internet. For instructions on setting up your CN3 and installing ActiveSync, see the Quick Start Guide.
Chapter 2 — Windows Mobile Tap to start a program Tap and hold to change time format Tap to change date and time Tap to change owner information Tap to review your email Your day at a glance. Tap to open an associated program To customize what is displayed on the Today screen including the background 1 Tap Start > Settings > the Personal tab > the Today icon. 2 Status icons display information such as low batteries or when the CN3 is connected to a desktop or to the Internet.
Chapter 2 — Windows Mobile Play digital audio and video files that are stored on your CN3 or on a network. Navigation Bar and Command Bar The navigation bar is located at the top of the screen. It displays the active program and current time, switch to programs, and close screens.
Chapter 2 — Windows Mobile Entering Information You can enter information on your CN3 in several ways, depending on the type you have and the program you are using: Synchronizing Using Microsoft ActiveSync, synchronize or copy information between your desktop and CN3. For more information on ActiveSync, see ActiveSync Help on your desktop. Typing Using the input panel, enter typed text into the CN3. Do this by tapping keys on the onscreen keyboard or by using handwriting recognition software.
Chapter 2 — Windows Mobile To change word suggestion options, such as the number of words suggested at one time, tap Start > Settings > the Personal tab > Input > the Word Completion tab. Typing With the Onscreen Keyboard Tap the input panel arrow, then tap Keyboard. On the soft keyboard that is displayed, tap the keys with your stylus. • To type a single uppercase letter or symbol, tap the Shift key. To tap multiple uppercase letters or symbols, tap the CAP key.
Chapter 2 — Windows Mobile Using Block Recognizer Character recognition software gives you a fast and easy method for entering information in any program on your CN3. Letters, numbers, and punctuation you write are translated into typed text. Tap the input panel arrow, then tap Block Recognizer. Write a letter in the box. When you write a letter, it is converted to typed text that appears on the screen.
Chapter 2 — Windows Mobile Writing on the Screen In any program that accepts writing, such as the Notes program, and in the Notes tab in Calendar, Contacts, and Tasks, you can use your stylus to write directly on the screen. Write the way you do on paper. You can edit and format what you have written and convert the information to text at a later time. Tap the Pen icon to switch to writing mode. This action displays lines on the screen to help you write.
Chapter 2 — Windows Mobile After Recognition Before Recognition If the conversion is incorrect, you can choose different words from a list of alternates or return to the original writing. To do so, tap and hold the incorrect word (tap one word at a time). On the pop-up menu, tap Alternates. Tap the word use from the menu with a list of alternate words, or tap the writing at the top of the menu to return to the original writing.
Chapter 2 — Windows Mobile Drawing on the Screen You can draw on the screen in the same way that you write on the screen. The difference between writing and drawing on the screen is how you select items and how they are edited. For example, you can resize selected drawings, while you cannot resize writing. Creating a Drawing Select Menu > Draw, then draw a line to initiate a drawing box. Subsequent strokes in or touching the box become part of the drawing.
Chapter 2 — Windows Mobile To add a recording 1 Tap Menu > View Recording Toolbar to add the recording toolbar to the bottom of the screen. 2 Hold the CN3’s microphone near your mouth or source of sound. 3 Tap the red circle to start your recording. 4 Tap the black box when finished. If you are recording in an open note, an icon appears in the note, like in the following sample. If you are creating a stand-alone recording, it appears in the note list.
Chapter 2 — Windows Mobile Using My Text When using Messaging, use My Text to quickly insert preset or frequently used messages into the text entry area. To insert a message, tap Menu > My Text, then select a message. • To quickly add common messages, tap Menu > My Text and tap a desired message. • To edit a My Text message, tap Menu > My Text > Edit My Text Messages. Tap the message you want to edit and enter new text at the bottom of the screen.
Chapter 2 — Windows Mobile Customizing Your Computer You can customize by adjusting settings and installing additional software. Adjusting Settings To adjust settings to fit the way you work, tap Start > Settings > either the Personal tab or the System tab located at the bottom of the screen. Note: The Phone applet in the Personal tab is available only on CN3s with built-in phones. Menus To customize what appears on the Start menu. Owner Information To enter your contact information.
Chapter 2 — Windows Mobile Adding Programs Using ActiveSync Install the appropriate software for your CN3 on your desktop before installing it on your CN3. 1 Determine your CN3 and processor type so that you know which version of the software to install. Tap Start > Settings > the System tab > the About icon > the Version tab, then make a note of the information in Processor.
Chapter 2 — Windows Mobile Adding a Program Directly from the Internet 1 Determine your CN3 and processor type so that you know which version of the software to install. Tap Start > Settings > the System tab > the About icon > the Version tab, then make a note of the information in Processor. 2 Download the program to your CN3 straight from the Internet using Pocket Internet Explorer. You may see a single .xip, .exe, or .zip file, a setup.
Chapter 2 — Windows Mobile Using ActiveSync on the desktop Use the Explorer in ActiveSync to explore your CN3 files and locate the program. Right-click the program, and then click Create Shortcut. Move the shortcut to the Start Menu folder in the Windows folder. The shortcut now appears on the Start menu. For information, see ActiveSync Help. Removing Programs Tap Start > Settings > the System tab > the Remove Programs icon.
Chapter 2 — Windows Mobile Before synchronization, install ActiveSync on your PC from the Windows Mobile Companion CD. ActiveSync is already installed on the CN3. After installation is complete, the ActiveSync Setup Wizard helps you connect your CN3 to your desktop, set up a partnership so you can synchronize information between your CN3 and your desktop, and customize your synchronization settings. Your first synchronization process automatically begins when finished using the wizard.
Chapter 2 — Windows Mobile synchronize this information directly with a Microsoft Exchange server. Each time you synchronize, ActiveSync compares the changes you made on your CN3 and desktop or server and updates both computers with the latest information. For information on using ActiveSync, see ActiveSync Help on the desktop. You can switch to any program by tapping it on the Start menu. Calendar: Scheduling Appointments and Meetings To switch to Calendar on the CN3, tap Start > Calendar.
Chapter 2 — Windows Mobile appointments to a category with a special project’s name. You can then use this category to filter and only display project appointments. Note: In Month View, the day of an appointment assigned to the Holiday category appears in red. This day was assigned the Holiday category Tap to access the Year view What’s an All Day Event? An appointment can either be a normal appointment or an all day event, which lasts the full day or spans many days.
Chapter 2 — Windows Mobile What’s a Recurrence Pattern? If you have an appointment or task that you do on a regular basis, such as a weekly team meeting or a monthly status report, enter the item once and set a recurrence pattern for it. If the default patterns in the list are not what you need, you can create your own pattern using the wizard. Select your recurrence pattern from this list Select to access the wizard with which to customize your recurrence.
Chapter 2 — Windows Mobile If you are working in Day view, tap and hold the time slot for the new appointment, then select New Appointment to have the time automatically entered for you. To change an appointment, tap it in the calendar, and then tap Edit. Change any appointment detail by tapping it and entering the new information. Tap the arrows to the right of the description and location boxes to choose from previous entries.
Chapter 2 — Windows Mobile Setting a Reminder for an Appointment Do the following to set a reminder for an appointment in the calendar: 1 Tap the appointment, then tap Edit to change the appointment. 2 Tap Reminder and select Remind me. 3 To change how many minutes before the appointment you are reminded, tap the minutes displayed, then select the new minutes from a drop-down or enter the new minutes. Tap minutes to change hours, days, or weeks.
Chapter 2 — Windows Mobile drawings, and other detailed information. To edit an existing note, tap the appointment in the calendar, tap Edit, then tap the Notes tab. 1 In the calendar, tap the appointment, then tap Edit. 2 Tap the Notes tab to enter notes. For specific instructions, tap Start > Help, then select a topic. Use your stylus to write or draw information here Making an Appointment Recurring Do the following to make a recurring appointment: 1 In the calendar, tap the appointment, then tap Edit.
Chapter 2 — Windows Mobile 4 Tap ok to return to the appointment. A check mark indicates a selected category Sending a Meeting Request Use Calendar to schedule meetings with people who use Outlook or Outlook Mobile. When attendees receive a meeting request, they can accept or decline the meeting. If they accept the request, the meeting is automatically added to their schedule, their response is sent back to you, and your calendar is updated.
Chapter 2 — Windows Mobile notes entered in the Notes tab (excluding writing) are also sent. To remove a person, highlight that person, then tap Delete Finding an Appointment • Tap Start > Programs > the Search icon, enter the appointment name, tap the Type arrow and select “Calendar” from the drop-down list, and then tap Search. You can tap the Search for drop-down arrow to select from a list of previously searched items or phrases.
Chapter 2 — Windows Mobile • To find an appointment assigned to a category, tap Menu > Filter, select the type of appointment to display. To show all appointments again, tap Menu > Filter > All Appointments to clear all categories. Tap to select or enter a phrase Tap to select where to search for this phrase Tap to see details Deleting an Appointment 1 In the calendar, tap and hold the appointment. 2 On the pop-up menu, tap Delete Appointment.
Chapter 2 — Windows Mobile • Tap the Appointments tab to select what Show icons appointment indicators should appear when you view appointment contents. Tap and hold an icon to see its name. Selected icons are in black. Contacts: Tracking Friends and Colleagues To switch to Contacts on the CN3, tap Start > Contacts. Contacts maintains a list of your friends and colleagues so that you can easily find the information you are looking for, whether you are at home or on the road.
Chapter 2 — Windows Mobile 3 To add notes, tap the Notes tab. You can enter text or draw. For information on creating notes, see “Notes: Capturing Thoughts and Ideas” on page 61. 4 When finished, tap ok to return to the contact list.
Chapter 2 — Windows Mobile • To see a list of contacts employed by a specific company, tap Menu > View By > Company. Then, tap the desired company name. Indicates the default number Tap to edit the default number Creating or Changing a Contact • To create a contact, tap New. To enter notes, tap the Notes tab. When finished, tap ok to return to the contact list. New contacts are added to the displayed category. • To change a contact, tap it in the contact list, and then tap Menu > Edit.
Chapter 2 — Windows Mobile 2 Tap the Notes tab. For instructions, tap Start > Help, then select a topic. Use your stylus to write or draw your information Tap to activate the input panel Assigning a Contact to a Category 1 In the contact list, tap the contact, and then tap Menu > Edit. 2 Scroll to, tap Categories, then check categories to assign to the contact. 3 To create a new category, tap New, enter the category name, then tap Done. The new category is automatically checked in the list.
Chapter 2 — Windows Mobile Finding a Contact Use any of the following methods to find a contact. To quickly move through a long list of contacts, tap one of the sets of letters displayed at the top to view contact names beginning with those letters. • Tap Start > Programs > the Search icon, enter the contact name, tap the Type arrow and select “Contacts” from the drop-down list, and then tap Search. You can tap the Search for drop-down arrow to select from a list of previously searched items or phrases.
Chapter 2 — Windows Mobile Changing Contacts Options In the contact list, tap Menu > Options, make your changes, then click ok to return to the Contacts list. Tasks: Keeping a To Do List To switch to Tasks on your CN3, tap Start > Tasks. Use Tasks to keep track of what you have to do. A variety of task information can display on the Today screen. If you use Microsoft Outlook on your desktop, you can synchronize tasks between your CN3 and desktop.
Chapter 2 — Windows Mobile • To change a task, tap it in the task list, and then tap Edit. Using the onscreen keyboard, enter a description. To assign the task to a category, tap Categories and check categories from the list. In the task list, you can filter tasks by category. When finished, tap ok to return to the task list. Synchronizing Tasks Tasks stored on the CN3 can synchronize with Microsoft Outlook on your desktop. Task synchronization is automatic in ActiveSync.
Chapter 2 — Windows Mobile To create documents with advanced formatting or templates, such as bulleted lists and tabs, use word processing software developed for your CN3, such as Word Mobile. Tap to change the sort order of the list Tap and hold to display a pop-up menu Tap to open a note or play a recording Tap to record Tap to create a new note Creating a Note To create your note, tap New, then write, draw, type, or record your information.
Chapter 2 — Windows Mobile To synchronize your notes as files, in ActiveSync, select the Files information type for synchronization and clear the Notes information type. When you select Files, the My Documents folder for the CN3 is created on your desktop. All .PWI files placed in the “\My Documents” folder on your CN3 and all .DOC files placed in the CN3’s “\My Documents” folder on your desktop are synchronized. Password-protected files cannot be synchronized.
Chapter 2 — Windows Mobile Synchronizing E-mail Messages After selecting Messaging for synchronization in ActiveSync, e-mail messages are synchronized as part of the general synchronization process. During synchronization: • Messages are copied from the Inbox folder on your desktop or the Microsoft Exchange server to the Inbox folder on your CN3. (Note that you can only synchronize information directly with an Exchange Server if your company is running Microsoft Mobile Information Server 2002 or later.
Chapter 2 — Windows Mobile the mail server. The next time you connect, the mail server sees that the messages are missing from the CN3 Inbox and deletes them from the server. This does prevent duplicate copies of a message, but it also means that you no longer have access to messages that you move to folders created from anywhere except the CN3. • If you use IMAP4, the folders you create and the e-mail messages you move are mirrored on the server.
Chapter 2 — Windows Mobile To delete an account, tap Menu > Tools > Options, tap and hold the name of the account, and then tap Delete. Note: You can set up several e-mail accounts including your ActiveSync account, but you can set up only one SMS account, which you cannot delete once it is set up. Downloading Messages from the Server Note that receiving entire messages consumes storage memory. The size column in the message list displays the local size and server size of a message.
Chapter 2 — Windows Mobile 6 Tap Send. If you are working offline, the message is moved to the “\Outbox” folder and is sent the next time you connect. Companion Programs Companion programs include Word Mobile, Excel Mobile, and PowerPoint Mobile, and Windows Media Player. To switch to a companion program on your CN3, tap Start > Programs > the program name. Word Mobile Word Mobile works with Microsoft Word on your desktop to give you access to copies of your documents.
Chapter 2 — Windows Mobile Tap to change the sort order of the list Tap to open a document Tap and hold an item to see a pop-up menu Tap to create a new document You can enter information in Word Mobile in by typing or writing. Each mode has its own toolbar, which you can show and hide by tapping the Input Panel icon in the center of the command bar. You can change the zoom magnification by tapping View > Zoom, then select the percentage you want.
Chapter 2 — Windows Mobile Writing Mode In writing mode, use your stylus to write directly on the screen. Ruled lines are displayed as a guide, and the zoom magnification is greater than in typing mode to allow you to write more easily. For more information on writing and selecting writing, see “Basic Usage” on page 30. Written words are converted to graphics (metafiles) when a Pocket Word document is converted to a Word document on your desktop.
Chapter 2 — Windows Mobile Creating a Workbook Use Excel Mobile to create workbooks, such as expense reports and mileage logs. To create a new file, tap Start > Programs > the Excel Mobile icon > New to access a blank workbook. Or, if you have selected a template for new workbooks under the Menu > Tools > Options, that template appears with appropriate text and formatting already provided. For future use, this is added to your Start menu in the Recent Programs area, via Start > Excel Mobile.
Chapter 2 — Windows Mobile • Split panes to view different areas of a large worksheet. Tap View > Split. Then drag the split bar to where you want it. To remove the split, tap View > Remove Split. For more information on using Excel Mobile, tap Start > Help. PowerPoint Mobile With PowerPoint Mobile on your CN3, you can open and view slide show presentations created on your PC.
Chapter 2 — Windows Mobile 4 To view a PowerPoint Mobile presentation in portrait, or right-handed or left-handed landscape orientations, tap the slide icon (in the bottom, left corner of the following illustration) for a pop-up menu. 5 Tap Show Options > the Orientation tab, then select an orientation. 6 Tap Default to view the presentation in the orientation that best fits the size and shape of the screen. Windows Media Player for Windows Mobile Tap Start > Windows Media.
Chapter 2 — Windows Mobile Internet Explorer Mobile Use Internet Explorer Mobile to view web pages in these ways: • During synchronization with your desktop, download your favorite links and mobile favorites that are stored in the Mobile Favorites subfolder in Internet Explorer on the desktop. • Connect to an ISP or network and browse the Web. To do this, create the connection first, as described in “Remote Access (Modems)” on page 139.
Chapter 2 — Windows Mobile 1 In ActiveSync on your desktop, click Tools > Options, and select “Favorites” from the Windows PC list. For more information on using ActiveSync, see ActiveSync Help on the desktop. 2 In Internet Explorer 5.0 or greater on your desktop, browse to the page you want to view offline, then click Tools > Create Mobile Favorite. 3 To change the link name, enter a new name in the Name box.
Chapter 2 — Windows Mobile Using Internet Explorer Mobile You can use Internet Explorer Mobile to browse mobile favorites and channels that were downloaded to your CN3 without connecting to the Internet. You can also connect to the Internet through an ISP or a network connection and browse the Web. Viewing Mobile Favorites and Channels 1 Tap Favorites, or Menu > Favorites to display your list of favorites. 2 Tap the page you want to view.
Chapter 2 — Windows Mobile 76 CN3 Mobile Computer User’s Manual
3 Configuring the Computer There are multiple ways to get an application to your CN3 Mobile Computer; like there are multiple ways to package the application for delivery. Note: Desktop icons and settings applet icons are shown to the left. Any place that Start is mentioned, tap the following Windows icon in the top, left corner of your CN3 desktop.
Chapter 3 — Configuring the Computer Developing Applications for the Computer CN3s run applications programmed in Microsoft Visual Studios 2005. Use this chapter to understand what you need to develop a new application for the CN3. Note: Microsoft eMbedded Visual C++ 4.0 may be used, but some features are not available. To develop applications for your CN3, use the Resource Kits in the Intermec Developer Library (IDL). Download the IDL from the Intermec web site at www.intermec.com/idl.
Chapter 3 — Configuring the Computer • Use the small nonvolatile Flash File Store region to hold CAB files that rebuild the system at clean-boot or install applications from a CAB file into the Flash File Store so they are “ready-to-run” when a clean-boot is performed. Since the FLASH in the system has a limited number of write cycles, do not use the Flash File Store for excessive writing purposes; however, reading is okay.
Chapter 3 — Configuring the Computer 3 Click Explore to access the “\Mobile Device” folder on your unit. 4 From your desktop, select Start > Windows Explorer, then browse the “C:\Intermec\CN3 Mgmt Tools\CabFiles” path for any CAB files needed for your CN3. Select the appropriate file, right-click the file for a pop-up menu, then select Copy.
Chapter 3 — Configuring the Computer Using the SmartSystems Console You can use the SmartSystems Console to drag-and-drop Intermec applications onto your CN3s. The CN3 ships with the SmartSystems client loaded on it. The console is part of SmartSystems Foundation and is available from the Intermec web site. To use SmartSystems Console to install an application file 1 Download the file from the Intermec web site, unzip it on your desktop.
Chapter 3 — Configuring the Computer You can use the InstallSelect application to reduce the amount of virtual memory used by portions of the SmartSystems Platform Bundle (SSPB). See “SmartSystems Platform Bundles (SSPB)” on page 21 for more information about SSPB. Freeing up virtual memory provides you with more space to load and run custom applications.
Chapter 3 — Configuring the Computer Note: When a component is not checked, the components listed after this component will appear as if they are not checked after the clean boot is performed. However, if you had checked these components before the clean boot, they will have been installed on the CN3 after the clean boot. 4 Click Apply to initiate the clean boot and install only the files that are checked. Click Cancel to disregard any selections you made and close the InstallSelect application.
Chapter 3 — Configuring the Computer InstallSelect Software Features (continued) Friendly Name Description Filename Printer Support Provides Intermec printer driver support. PrinterSupport.cab Avalanche Enabler Provides client enablement to Wavelink's Device Management solution. WLEnablerproduct.cab SmartSystems Client & Intermec Settings Provides client enablement to the SmartSystems Server and enables the use of Intermec Settings on the local computer. SSRefClient_WM50_ARMV41.
Chapter 3 — Configuring the Computer Launching Your Application Automatically Note: This describes the system component startup for Intermec provided components only. It does not describe the bootstrap loader process. It only describes the component installation process provided by Windows Mobile. It is assumed that you understand the Microsoft Mobile startup procedures and are familiar with how Microsoft components start up.
Chapter 3 — Configuring the Computer present in the “\SYSTEM” folder on any of these media, it executes the program only on the first media it is found on and no other. AutoExec is reserved for Intermec use to configure Intermec-specific applications. It launches the CAB installer, AutoCab (AutoCab.exe), to install platform cab files to the system, such as Intermec Data Collection. When the AutoExec is complete, RunAutorun then checks for the existence of AutoRun (AutoRun.
Chapter 3 — Configuring the Computer Process return code uses standard error codes defined in WinError.h. Keywords that AutoExec supports are: QUIET Enables user notification when an error occurs. LOGGING Enables logging to a trace file. SIGNAL Enables the specified named event and is immediately signaled. Useful for notifying other components of the current status. CALL Opens another .dat file to process. After the called file is completed, this file is resumed.
Chapter 3 — Configuring the Computer AutoRun supports the following script commands in AutoUser.dat and AutoRun.dat. Note: If you need to add steps at boot time, add them to AutoUser.dat, not to AutoRun.dat. AutoRun.dat is provided by Intermec and is subject to change. AutoUser.dat is the designated place for the end user to add steps to the boot time process. EXEC Launches a specified program, waits for it to complete (up to 10 minutes). CALL Processes a specified file of commands and returns.
Chapter 3 — Configuring the Computer Usage: AutoReg [-D] [-HKey] [-Q] “filename” -D Deletes the registry file after successfully loading it. This allows for systems that have hives implemented. -H Saves the registry path, and all child entries, to the specific .REG registry file. -Q Indicates whether a message box should appear when a fatal error occurs. filename Fully qualified file name to read from or write to, encased in double quotes to support spaces in paths or file names. See examples below.
Chapter 3 — Configuring the Computer -Move= Set to 1 to force source cab file deletion, even when read-only bit set on file. Default is 0 (disabled). -Quiet= Set to 0 to allow AutoCab to display user message box on errors. Useful for debugging cab installation. Default is 1 (keep quiet). -Show= Set to 0 to prevent showing any installation progress interfaces. Also prevents user from canceling installation. Set to 1 to show normal installation.
Chapter 3 — Configuring the Computer 5 Copy the AutoRun.dat file to the “\SYSTEM” folder on your CN3. During every boot, the system scans for AutoRun.dat in the “\SYSTEM” folder. Here is a sample AutoRun.dat file that runs a dialer application and connects to a VPN: EXEC “\Program Files\My Dialer\Dialer.exe” 348-2600 EXEC “\Program Files\My VPN\Connect.exe” MyDomain Configuring Parameters You can configure many parameters on the CN3, such as the bar code symbologies it decodes or the network settings.
Chapter 3 — Configuring the Computer outside source such as the U.S. Naval Observatory (USNO). The CN3 uses Simple Network Time Protocol (SNTP) to synchronize with a network time server. The default reference time server is the USNO (tock.usno.navy.mil). To synchronize the time on your CN3 with this time server, you must have a valid connection to the Internet. You can also synchronize the CN3 system time with a corporate network server within your firewall that is SNTPcapable.
Chapter 3 — Configuring the Computer Example In the host application, you want to get the current values of two configuration commands from the CN3. Send the CG$+NABV transaction from the host application Note: The transaction header is not shown in this example. You do not need a transaction header for a host application in a TCP/IP network, but you do for a UDP Plus network. where: CG is a TMF Configuration Get request. $+ is the Change Configuration reader command.
Chapter 3 — Configuring the Computer transaction header A 96-byte field with message number, date, time, source application ID, destinations application ID, transaction ID, and other. Set the system message (SYS$MSG) flag to E in the transaction header. TMF field A 2-byte field containing one of these values: commands CG Configuration Get request sent from the host application. Cg Configuration Get response sent from the CN3 to the host computer.
Chapter 3 — Configuring the Computer To set images to portrait or landscape • Using the Slide Show tab, you can set your images to portrait or landscape for optimum viewing. When your CN3 is connected to your desktop PC using an ActiveSync USB connection and ActiveSync is idle, you can play a screensaver slide show using all the pictures in the “\My Pictures” folder. To save picture files • Use the Camera tab, you can set the default location where pictures are saved.
Chapter 3 — Configuring the Computer To add sound to images and set the timer • With the Video tab, you can add sound to your images and set the time for how long the camera is to stay on an image before pausing the recording. Configuring the SF51 Cordless Scanner The following information pertains to configuring the SF51 Cordless Scanner to work with your CN3. These instructions assume you have EasySet version 5.4 or later installed on your desktop or laptop.
Chapter 3 — Configuring the Computer To enable Bluetooth 1 Select Start > Settings > the System tab > the Intermec Settings icon. 2 Tap (+) to expand Communications > Bluetooth > Power, then select On to enable Bluetooth. 3 Tap File > Save Settings, then File > Exit to close the applet. Creating an SF51 Connection Label To initiate a connection from the SF51 1 Use EasySet to create an SF51 connection label with the CN3 Bluetooth address.
Chapter 3 — Configuring the Computer 5 Enter the passcode number when prompted. The default is “0000.” 6 When connected, the blue Intermec Ready-to-Work indicator turns on and stays on. Viewing SF51 Scanner Information from Your Computer Note that in the CN3, the Intermec Settings applet can display up to seven separate SF51 connections. The following illustration shows such connections under the Data Collection option.
4 Maintaining the Computer Use this chapter to solve problems you may encounter and perform routine maintenance on your CN3 Mobile Computer.
Chapter 4 — Maintaining the Computer Upgrading the Operating System on your Computer You can use the SmartSystems™ Foundation application from Intermec to perform upgrades on your CN3, versions 3.0 or greater. Contact your Intermec representative for more information about the SmartSystems Foundation software. When you upgrade the operating system, you erase the current configuration and replace it with the new default configuration.
Chapter 4 — Maintaining the Computer 7 If you are using the SmartSystems Console to upgrade the CN3, go to page 102, otherwise go to the next paragraph. Using a Storage Card to Upgrade the Computer To use a miniSD storage card to upgrade the CN3, you need a Secure Digital card reader and a miniSD storage card formatted as FAT16. Note: Intermec offers miniSD cards for sale which have been tested and certified to work with the CN3. Intermec cannot guarantee that other miniSD cards will work with CN3s.
Chapter 4 — Maintaining the Computer 9 When progress is complete, the CN3 performs a warm-boot to reset its configuration. Remove the miniSD card and delete its files. Set the date, time, and network communication parameters to reestablish communications with the other devices in the wireless network. Upgrading the SSPB Files You may download files that upgrade only the SSPB files. 1 Extract the SSPB upgrade files to a miniSD card.
Chapter 4 — Maintaining the Computer Once the upgrade is done downloading to your CN3, your CN3 replaces the operating system, then performs a warm-boot. The SmartSystems Console shows your CN3 as offline (via a red stop sign) until the device reboots and reconnects to the system. Troubleshooting Your Computer Before sending the CN3 in for service, save its data and configuration.
Chapter 4 — Maintaining the Computer Problems with Wireless Connectivity Problem Solution When you turn on the CN3 after it was suspended for a while (1015 minutes or longer), it can no longer send or receive messages over the network. Host may have deactivated or lost current terminal emulation session. In a TCP/IP direct connect network, turn off the “KeepAlive” message from host to maintain the TCP session while a CN3 is suspended. The No Network Connection icon appears on the toolbar.
Chapter 4 — Maintaining the Computer Problem Solution A network connection icon appears in the toolbar, but then disappears. The CN3 may not be communicating with the intended access point. Make sure the CN3 network name matches the access point network name. Default network name is “INTERMEC.” Access point may not be communicating with server. Ensure the access point is turned on, properly configured, and has 802.1x security enabled. The CN3 indicates it is not authenticated.
Chapter 4 — Maintaining the Computer Problems While Scanning Bar Codes (continued) Problem Solution The input device attached to the CN3 does not work well or read bar code labels very quickly. Set the Scanner Model command to the specific attached input device. Check enabled bar code symbologies and enable only the symbologies being used. The scanner will not read the bar code label. Aim the scanner beam to cross entire bar code label in one pass. Vary the scanning angle.
Chapter 4 — Maintaining the Computer Press the power switch to turn off the CN3. Dip a clean cloth towel in the ammonia solution and wring out the excess. Wipe off the scanner window and camera lens and flash area. Do not allow any abrasive material to touch these surfaces. Wipe dry.
Chapter 4 — Maintaining the Computer 108 CN3 Mobile Computer User’s Manual
5 Network Support This chapter includes information about the different networks supported by the CN3 Mobile Computer, and ways to configure and manage those networks. Note that the CN3 automatically installs the appropriate software for radio or phone use when the unit is turned on. Note: Desktop icons and applet icons are shown to the left. Any place that Start is mentioned, tap the following Windows icon in the top, left corner of your CN3 desktop.
Chapter 5 — Network Support Personal Area Networks “Bluetooth” is the name given to a technology standard using short-range radio links, intended to replace cables connecting portable and fixed electronic devices. The standard defines a uniform structure for a range of devices to communicate with each other with minimal user effort. Its key features are robustness, low complexity, low power, and low cost.
Chapter 5 — Network Support Configuring with the Wireless Manager Note: The Wireless Manager application is available only when Microsoft Zero Configuration is enabled. If Intermec Security is enabled, then this application is not available. See page 175 for information on enabling and configuring Microsoft Security. You can use the Wireless Manager to enable and disable Bluetooth, Wi-Fi, and the Phone if it is built into your CN3.
Chapter 5 — Network Support • If Bluetooth was enabled before a clean-boot was performed, the CN3 boots up with the Bluetooth state enabled and Bluetooth virtual COM ports (such as printing) registered. Reactivate the connections manually as the system does not do them. • If Bluetooth was disabled before a clean-boot was performed, the CN3 boots up with Bluetooth disabled. To turn on Bluetooth • Select Start > Settings > the Connections tab > the Bluetooth icon > the Mode tab, then check Turn on Bluetooth.
Chapter 5 — Network Support 2 When the CN3 is finished scanning, any newly found devices appear in the box. Tap Refresh to do additional searches. 3 Select a device to which to connect, then click Next.
Chapter 5 — Network Support 4 Enter a passkey to establish a secure connection, then tap Next. Passkeys are typically provided in the documentation that comes with the Bluetooth device being searched. Tap Yes if prompted to let the other device connect with your CN3. 5 Select what services you want from this remote device, then click Finish to return to the Devices tab. To connect with other devices 1 Tap the COM Ports tab, then tap New Outgoing Port to connect to a Bluetooth device.
Chapter 5 — Network Support 2 Select the device to add, then click Next. 3 Select a port from the Port drop-down list, check Secure Connection, then click Finish to return to the COM Ports page. 4 Tap New Incoming Port to allow other Bluetooth devices to connect with your CN3. Select on which port to secure this connection, then click Finish to return to the COM Ports page.
Chapter 5 — Network Support 5 You can press and hold on a device to edit that device or delete it from the list. Using the Wireless Printing Applet The Wireless Printing applet separates the task of wireless printing from other Bluetooth management items not relevant to this task. Wireless Printing has a concept of the “current wireless printer.” This printer is the one to which the CN3 makes a connection when the wireless printing COM port is opened.
Chapter 5 — Network Support To do a Bluetooth device search 1 Select Start > Settings > the System tab > the Wireless Printing icon. 2 Clear the Show Printers Only box if you want to find more than just the Bluetooth printers. 3 Tap Search to initiate the device search. 4 In about half a minute, Bluetooth devices found within your range will appear. If your preferred printer is in the list, select to highlight the printer, then tap OK.
Chapter 5 — Network Support To perform a manual setup If you know the Bluetooth Device Address of the printer you want to use, do the following to avoid a Device Search. 1 Select Start > Settings > the System tab > the Wireless Printing icon. 2 Tap Manual, enter the address of your device in the field, then tap OK. Tap Cancel to return to the first screen without making changes. When you set your printer manually, your device may not receive the printer name.
Chapter 5 — Network Support Connecting to Bluetooth Audio Devices The Bluetooth audio user interface is a part of the Bluetooth Audio applet. You can use this applet to search for, activate, and connect to Bluetooth audio devices, such as Bluetooth headsets. You can control the audio volume and the amplification for the microphone for the connected Bluetooth audio device (if the connected device has these capabilities). To access the Bluetooth Audio applet 1 From the CN3 desktop, select Start > Settings.
Chapter 5 — Network Support 3 Select the services tied to the Bluetooth audio device to which you are connecting, then tap Finish. Once the pairing is successfully completed, the Bluetooth audio device appears in the list of devices that are found. You can double-tap any of the devices for a pop-up menu to set it as a default, make a connection, refresh the connection, or delete the device from the list. Note: You can only select one Bluetooth audio device as the default device.
Chapter 5 — Network Support Connecting to a Bluetooth Headset If you find several Bluetooth audio devices, you can only connect to one audio device. Before you can connect to that device, you must set it as the default audio device. To connect to an audio device 1 Double-tap a device for its pop-up menu, then select to check Set as default if it is not already checked. On successful device activation, the device icon changes to include a red check mark.
Chapter 5 — Network Support 5 When connection is established, the “connected/disconnected” status changes to that of a “connected” status and the Audio Device Settings are enabled to adjust settings of the connected Bluetooth audio device.
Chapter 5 — Network Support Before you connect to the network, make sure Bluetooth is enabled on your CN3 so you can find and connect to remote devices. Go to “Personal Area Networks” on page 110 for information. Once connected, you should be able to browse Internet websites and use other online resources.
Chapter 5 — Network Support 3 Tap Add new device... if the phone is not listed in the known devices. Make sure your Bluetooth device is turned on before you start the search. 4 When the search for devices is complete, select your Bluetooth device, then tap Next to continue. 5 Enter the correct Passkey on both the Bluetooth device and the CN3, then tap Next to continue.
Chapter 5 — Network Support 6 Enter a name for the device if needed, or select what services to use, then tap Finish. 7 Select the Bluetooth device to use to connect to the network, then tap Next to continue. 8 Enter the appropriate number as it should be dialed for your Bluetooth connection, then tap Next to continue.
Chapter 5 — Network Support 9 Enter the user name, password, and domain required for your Bluetooth device, then tap Finish. Now you can establish a connection to your network via the Internet Explorer application. To disconnect, tap the Connectivity icon in the top menu bar, then select Disconnect. Local Area Networks (LANs) The CN3 is a versatile mobile computer that you can add to your wired or wireless LAN. It has an internal 802.11b/g radio to transfer data using wireless communications.
Chapter 5 — Network Support Using the CDMA Radio Phone Application With the CDMA radio module installed in your CN3, you can send and receive telephone EV-DO (1x Evolution Data Optimized) calls as well as transmit data via wide-area (WAN) cellular networks. The CN3 provides a phone speaker, microphone, and speakerphone, and supports the use of a Bluetooth headset or hands-free kit. At factorydefault, the phone is not activated.
Chapter 5 — Network Support Activating the Phone The CDMA phone is activated using the Activation Wizard in the Phone application. Contact your Intermec representative for more information. With the WAN radio module installed in your CN3, you can send and receive telephone calls. Use the speaker on the back of the computer as your earpiece and use the connector on the bottom of the computer for your mouthpiece.
Chapter 5 — Network Support 4 Enter your 6-digit activation code (hidden by asterisks), then tap Next to continue. 5 Enter the phone number and MSID from Sprint, then tap Next to continue. 6 The application prompts whether the information entered is correct. If so, tap Yes to continue, else tap No to return to the previous screen.
Chapter 5 — Network Support 7 The application acknowledges that your phone will be in service in up to four hours. Tap Finish to close the wizard. Note: Voice service is available immediately. Data service takes up to four hours of activation before you can use the service. If after four hours, a data connection is not established, go to “Updating Your PCS Vision Profile” on page 132 to manually launch data provisioning.
Chapter 5 — Network Support To use the Call History feature • Tap Call History to note the telephone numbers that were previously dialed from this CN3. To configure your phone settings • Either select Menu > Options from the Phone application, or • Select Start > Settings > the Personal tab > the Phone icon to access the applet.
Chapter 5 — Network Support To remain private • Tap 911 Only. This ensures that no service may use your location without you giving permission. Updating Your PCS Vision Profile Tap the Data Settings tab to either repair your connection settings or automatically update your PCS Vision. • When the built-in phone data connection used by Microsoft’s connection manager is corrupted, tap Repair Connectoid to repopulate the registry with the correct values for the data connection.
Chapter 5 — Network Support Note: The data provisioning process can be automatically initiated by the Sprint network, by attempting to make a cellular line connection to the WAN before the CN3 is data provisioned, or by manually starting the connections through this screen. Intermec recommends that Sprint Network “push” the data provisioning to your CN3. This should occur shortly after the voice activation is complete. To repair your connections 1 Click Repair Connected, then tap Yes to do the repair.
Chapter 5 — Network Support Setting the Roaming Range Scroll to, then tap the System Settings tab to set your roaming feature to either automatic with having to go through your server or to roam through the Sprint server. To alert the caller when roaming is enabled • Tap Automatic. To roam the network through the Sprint server • Tap Sprint. To be notified when devices are located • Check Enable Call Guard alert when roaming.
Chapter 5 — Network Support Using the GSM/EDGE Radio Phone Application With the WAN radio module installed in your CN3, you can send and receive telephone calls as well as transmit data via wide-area cellular networks. The CN3 provides a phone speaker, microphone, and speakerphone, and supports the use of a Bluetooth headset or hands-free kit. At factory-default, the phone is disabled.
Chapter 5 — Network Support Activating the Phone The GSM/EDGE phone is activated via a SIM card that you can purchase from your network provider, and inserted in the miniSD/SIM cavity in the back of your CN3. Contact your Intermec representative for more information. To insert the SIM card 1 Press the power switch to suspend the CN3, then remove the battery pack from the back of the CN3. 2 Remove the two screws on the miniSD/SIM card slot door. Note the screws to this door are to be torqued to 1.5 in-lbs.
Chapter 5 — Network Support Tap the appropriate keys to enter a telephone number, then tap Talk to dial the number shown above the keypad. Tap this to backspace one digit Tap this to select a previously dialed number Tap this to access the Contacts application Tap this to view previous calls To use the Speed Dial feature • Tap Speed Dial to select a telephone number with which the CN3 is to dial automatically. Use the Contacts application to add to this list.
Chapter 5 — Network Support To customize your phone settings • Either select Menu > Options from the Phone application, or • Select Start > Settings > the Personal tab > the Phone icon to access the applet. Customizing the Phone Tap the Phone tab to customize your phone settings such as the ring type and ring tone to use for incoming calls, and the keypad tone to use when entering phone numbers. Tap Change PIN to reset the personal identification number for this phone.
Chapter 5 — Network Support 2 Make your changes, then tap ok to return to the Settings screen. Below is a sample Settings screen. Setting Up the Network Tap the Network tab to find, set, or select the type of network on which this phone is to communicate. Remote Access (Modems) You can set up connections to the Internet and corporate network at work to browse the Internet or intranet, send and receive e-mail, and synchronize information using ActiveSync. Connections are made via wireless networks.
Chapter 5 — Network Support • My Work Network Connect to the network at your company or organization where you work. Once connected, you can send and receive e-mail messages by using Messaging, view web pages by using Internet Explorer Mobile, and synchronize with your desktop. If this is the method you want to use, see “Connecting to Work” on page 143. Connecting to an Internet Service Provider You can connect to your ISP, and use the connection to send and receive e– mail messages and view Web pages.
Chapter 5 — Network Support 4 If using an external modem connected to your CN3 with a cable, select “Hayes Compatible on COM1” from the Select a modem list dropdown list, then tap Next to continue. 5 Enter the access phone number, then tap Next. For more information, tap use dialing rules. 6 Enter the user name, password, and domain (if provided by an ISP or your network administrator), then tap Finish.
Chapter 5 — Network Support 7 Tap the Advanced tab from the Connections screen, then tap Dialing Rules to specify your current location. These settings apply to all connections. 8 Tap Use dialing rules, tap ok, then tap Edit to continue. 9 Specify your current phone type. If your phone type is pulse dialing, check Pulse dialing. If your type is tone dialing (as most phone lines are), then clear Pulse dialing. Continue to tap ok to close each page and return to the Settings page.
Chapter 5 — Network Support Connecting to Work If you have access to a network at work, you can send e-mail messages, view intranet pages, synchronize your CN3, and possibly access the Internet. Create a modem connection via a RAS (Remote Access Server) account. Before you can create this modem connection, your network administrator needs to set up a RAS account for you. Your network administrator may also give you Virtual Private Network (VPN) settings.
Chapter 5 — Network Support 5 Enter the access phone number, using some of the following guidelines. If you know part of the phone number changes frequently as you travel, create dialing rules to avoid creating numerous modem connections for the same phone number. For more information, tap use dialing rules. • Enter the phone number exactly as you want it dialed. For example, if you call from a business complex or hotel that requires a nine before dialing out, enter “9” in front of the phone number.
Chapter 5 — Network Support 4 Enter the user name, password, and domain (if provided by an ISP or your network administrator). If a domain name was not provided, try the connection without entering a domain name. Tap Finish. Creating a VPN Server Connection to Work A VPN connection helps you to securely connect to servers, such as a corporate network, via the Internet.
Chapter 5 — Network Support 3 In Name, enter a name for the connection, such as a company’s name. In Host name/ IP, enter the VPN server name or IP address. Next to VPN type, select the type of authentication to use with your device: “IPSec/L2TP” or “PPTP.” If you are not sure which option to choose, ask your network administrator. Tap Next to continue. 4 Select the type of authentication. If you select A pre-shared key, enter the key provided by your network administrator.
Chapter 5 — Network Support Insert necessary equipment, such as a network card, into the CN3, and use a desired program to begin connecting. Ending a Connection Use any of these methods to end your connection: • When connected via modem or VPN, tap the Connectivity icon on the top, then tap Disconnect. • When connected via cable or cradle, detach your CN3. • When connected via Infrared, move the CN3 away from the other computer or device. • When connected via a wireless network, switch off the connection.
Chapter 5 — Network Support To access the iConnect menu • Tap the iConnect icon (shown to the left) above your command bar. • Select Dismiss from the iConnect menu to end the session without exiting the application. • Select Exit iConnect to exit the application. To access the iConnect application after you have exited it • Perform a warm-boot on the CN3. The iConnect icon then reappears above the command bar.
Chapter 5 — Network Support To view information about the Wireless 802.11b/g communications • Select Tools > Wireless IP Settings from the iConnect menu for the following: To view the status of the Wireless communications • Select Status > Wireless from the iConnect menu to view the status. Tap Try Again to check the status after you make changes to the connection. Ping Test To test the connection of your CN3 against your network • Select Tools > Ping Test from the iConnect menu.
Chapter 5 — Network Support ISpyWiFi The ISpyWiFi utility provides more detailed information for the 802.11 radio connection in your CN3, such as MAC address, access point information, association, encryption, power management, antenna status, RSSI, data link rates, and supplicant status. With the utility, you can scan for access points in your network and ping for detailed and illustrated information. Starting the Utility The ISpyWiFi utility is installed in your CN3 as an executable.
Chapter 5 — Network Support 4 Close the File Explorer, select Start > Programs to locate the Shortcut to ISpyWifi icon. Tap this icon to access the ISpyWifi application. Note that this icon is temporary.
Chapter 5 — Network Support AP Status Shows whether the radio is associated with the access point Channel The channel on which the radio is communicating with the access point ESSID The text SSID (Network Name) for your network BSSID MAC address of radio AP with which the client radio is communicating Config Association Shows one of the following types: Open, WPA, WPA-PSK, WPA2, Network EAP Note that more information about these types start on page 183.
Chapter 5 — Network Support • SSID displays the broadcast range from the access point. • Signal shows the RSSI seen from the access point. • Channel lists the channel on which client radio is communicating with access point. • BSSID displays the MAC address for the access point radio • When Privacy shows a “Y,” WEP, TKIP, or AES encryption is used; an “N” indicates that no encryption is used.
Chapter 5 — Network Support • Click Configure Profile to launch the Profile Wizard and configure 802.11 options. See “Using the Profile Wizard” on page 161 for information on configuring this wizard. • Click Reconnect to disassociate the radio, momentarily dropping its connection. The radio then reassociates and reauthenticates, but does not do anything with the radio driver. • Click Clear Events to remove the information shown in the Supplicant Event box.
Chapter 5 — Network Support 4 Depending on how the screen is set up, you can toggle between a graph and a list of ping results: • Tap Graph to toggle to the graphical view of 25 of the most recent pings and their response results, like in the following sample graph: Last ping Maximum ping Minimum ping Average ping Note the size of the gray area represents the standard deviation from the mean.
Chapter 5 — Network Support The debug output file is then stored in the “\My Device” root folder as a text file called “uroddsvc.” Using File Explorer, press and hold your stylus on this file for its pop-up menu, then select any of its options to copy, beam, send, or delete this file. Configuring Security The CN3 provides three types of security for your wireless network: • Wi-Fi Protected Access 2 (WPA2/802.11i) • WPA • WEP. 802.
Chapter 5 — Network Support To configure Funk Security 1 Select Start > Settings > the System tab > the Intermec Settings icon. 2 Tap (+) to expand Communications > 802.11 Radio > Funk Security. 3 Select an active profile, then configure its security settings. Using WPA Security Wi-Fi Protected Access (WPA) is a strongly enhanced, interoperable Wi-Fi security that addresses many of the vulnerabilities of Wired Equivalent Privacy (WEP).
Chapter 5 — Network Support Configuring WPA Security With Funk Security Use this procedure to set WPA security with Funk security. 1 Make sure you have configured the communications and radio parameters on your CN3 and that Funk is your security choice. 2 Open Intermec Settings. Tap (+) to expand Communications > 802.11 Radio > Funk Security > Profile X with “X” being “1” through “4.” 3 For Association, select “WPA” and press Enter.
Chapter 5 — Network Support Configuring WPA-PSK Security With Funk Security Use this procedure to set WPA-PSK security on your CN3 with Funk security. 1 Make sure you have configured the communications and radio parameters on your CN3 and that Funk is your security choice. 2 Open Intermec Settings. Tap (+) to expand Communications > 802.11 Radio > Funk Security > Profile X with “X” being “1” through “4.” 3 For Association, select “WPA” and press Enter. 4 For 8021x, select “None” and press Enter.
Chapter 5 — Network Support Configuring 802.1x Security With Funk Security Use this to set 802.1x security on your CN3 with Funk security. 1 Make sure you have configured the communications and radio parameters on your CN3 and that Funk is your security choice. 2 Open Intermec Settings. Tap (+) to expand Communications > 802.11 Radio > Funk Security > Profile X with “X” being “1” through “4.” 3 For Association, select “Open” and press Enter.
Chapter 5 — Network Support Using Static WEP Security The CN3 uses the Wired Equivalent Privacy (WEP) protocol to add security to your wireless network based on the 802.11b/g standard. To use WEP security, you need an access point with an 802.11b/g radio. Configuring Static WEP Security With Funk Security Use this procedure to set Static WEP security with Funk security. 1 Make sure you have configured the communications and radio parameters on your CN3 and that Funk is your security choice.
Chapter 5 — Network Support Use the Profiles page to select and configure between the networking environments assigned to this 802.11b/g radio. • Tap the Profile drop-down list to choose between four different profiles assigned to this unit, then tap Edit Select Profile, make the changes needed for this profile (starting on the next page), then tap ok to return to the Profiles page.
Chapter 5 — Network Support • SSID (Network Name) assumes the profile name unless another name is entered in this field. If you want to connect to the next available network or are not familiar with the network name, enter “ANY" in this field. Consult your LAN administrator for network names. • Check Enable Power Management to conserve battery power (default), or clear this box to disable this feature.
Chapter 5 — Network Support 4 Enter an ASCII key or a hex key either 5 or 13 bytes long based on the radio capability in the appropriate Key # field. Set a 5-byte value for 64bit WEP or a 13-byte value for 128-bit WEP. Precede hex keys with 0x and make sure the keys use 5 or 13 hex pairs. To enable WPA encryption using a pre-shared key 1 Set 8021x Security as “None.” 2 Set Association to “WPA.” 3 Enter the passphrase as ASCII (12345) in the Pre-Shared Key field.
Chapter 5 — Network Support 4 Enter the passphrase as ASCII (12345) in the Pre-Shared Key field. PEAP (Protected EAP) This protocol performs secure authentication against Windows domains and directory services. It is comparable to EAP-TTLS (see page 168), both in its method of operation and its security, though not as flexible. This does not support the range of inside-the-tunnel authentication methods supported by EAP-TTLS. Microsoft and Cisco both support this protocol.
Chapter 5 — Network Support 3 Select Prompt for password to have the user enter this password each time to access the protocol; or leave Use following password as selected and enter your unique password to use the protocol without entering a password each time you use your CN3. 4 Tap Get Certificates to obtain or import server certificates (page 170). 5 Tap Additional Settings to assign an inner PEAP authentication and set options for server certificate validation and trust.
Chapter 5 — Network Support TLS (EAP-TLS) EAP-TLS is a protocol that is based on the TLS (Transport Layer Security) protocol widely used to secure web sites. This requires both the user and authentication server have certificates for mutual authentication. While cryptically strong, this requires corporations that deploy this to maintain a certificate infrastructure for all their users.
Chapter 5 — Network Support 4 Tap ok to return to the Security page. TTLS (EAP-Tunneled TLS) This protocol provides authentication like EAP-TLS (see page 167) but does not require user certificates. User authentication is done using a password or other credentials that are transported in a securely encrypted “tunnel” established using server certificates. EAP-TTLS works by creating a secure, encrypted tunnel through which you present your credentials to the authentication server.
Chapter 5 — Network Support 2 Enter your unique Username to use this protocol. 3 Select Prompt for password to have the user enter this password each time to access the protocol, or leave Use following password as selected and enter your unique password to use the protocol without entering a password each time you use your CN3. 4 Tap Get Certificates to obtain or import server certificates (page 170).
Chapter 5 — Network Support 6 Enter the Anonymous EAP-TTLS Name as assigned for public usage. Use of this outer identity protects your login name or identity. Tap ok. Getting Certificates Certificates are pieces of cryptographic data that guarantee a public key is associated with a private key. They contain a public key and the entity name that owns the key. Each certificate is issued by a certificate authority. Use these fields for batch importing certificates into the Microsoft certificate store.
Chapter 5 — Network Support Both files must have the same name for the appropriate private key to associate with the correct certificate, such as admin.cer and admin.pvk. The certificate files are deleted from the CN3 after they import to the store. If there are no certificates to import, this action fails. To import user certificates 1 Tap the <<< button next to the Certificate Path field to select the user certificate (DER-encoded .cer file without the private key) to import.
Chapter 5 — Network Support To configure LEAP settings 1 Set 8021x Security as “LEAP,” then choose one of the following: • Set Association to “Open.” • Set Association to “WPA.” • Set Association to “WPA2” and Encryption to “TKIP” or “AES.” • Set Association to “Network EAP” and Encryption to either “WEP” or “CKIP.” (default configuration) 2 Enter your unique Username to use this protocol.
Chapter 5 — Network Support • Set Association to “Network EAP” and Encryption to either “WEP” or “CKIP.” 2 Enter your unique Username to use this protocol. 3 Select Prompt for password to have the user enter this password each time to access the protocol, or leave Use following password as selected and enter your unique password to use the protocol without entering a password each time you use your CN3. 4 Tap Additional Settings to set options for PAC management and assign an anonymous EAP-FAST name.
Chapter 5 — Network Support Configuring Advanced Settings • Wireless NICs and APs associate based on the SSID configured for the NIC. Given an SSID, the BSSID with the strongest signal is often chosen for association. After association, 802.1x authentication may occur and during authentication credentials to uniquely identify a user these are passed between the NIC and the AP. Base 802.1x technology does not protect the network from “rogue APs.
Chapter 5 — Network Support Configuring Microsoft Security The default security setting is Funk. If you want to use Microsoft security, you need to select it as your security choice. Intermec recommends that you use the Intermec Settings applet to configure your security. See the Intermec Computer Command Reference Manual for more information on using this applet. To enable Microsoft Security 1 Select Start > Settings > the System tab > the Intermec Settings icon. 2 Tap (+) to expand Communications > 802.
Chapter 5 — Network Support To configure Microsoft Security using Intermec Settings 1 Tap (+) to expand Communications > 802.11 Radio > Microsoft Security. 2 Select Network name (SSID) and enter the SSID. To connect to an ad-hoc connection • Set Infrastructure Mode to “Ad hoc”. To disable WEP encryption • Set Network Authentication to “Open” if WEP keys are not required; or “Shared” when WEP keys are required. • Set Data Encryption to “Disabled”.
Chapter 5 — Network Support Configuring Preferred Networks Networks already configured are preferred networks. You can connect to only preferred networks or search for and connect to any available network. A wireless network can be added either when the network is detected, or manually by entering settings information. To determine if authentication information is needed, see your network administrator. 1 Tap Start > Settings > the Connections tab > the Wi-Fi icon , then tap Add New . . .
Chapter 5 — Network Support 5 Do one of the following: To disable WEP encryption • Set Authentication to either “Open” if WEP keys are not required; or “Shared” when WEP keys are required for association. • Set Data Encryption to “Disabled.” To enable WEP encryption • Set Authentication to either “Open” if WEP keys are not required; or “Shared” when WEP keys are required for association. • Set Data Encryption to “WEP.
Chapter 5 — Network Support To enable WPA authentication • Set Authentication to “WPA.” • Set Data Encryption to either “AES” or “TKIP.” • Enter the new Network key. To enable WPA authentication using a preshared key • Set Authentication to “WPA-PSK.” • Set Data Encryption to either “AES” or “TKIP.” • Enter the new Network key.
Chapter 5 — Network Support To enable WPA2 authentication • Set Authentication to “WPA2.” • Set Data Encryption to either “AES” or “TKIP.” • Enter the new Network key. To enable WPA2 authentication using a preshared key • Set Authentication to “WPA2-PSK.” • Set Data Encryption to either “AES” or “TKIP.” • Enter the new Network key. 6 Tap Next, select either “PEAP” or “Smart Card or Certificate” for the EAP type, then tap Properties to adjust its settings.
Chapter 5 — Network Support 7 Tap Finish to return to the Configure Wireless Network screen. 8 From the Networks to access drop-down list, select “All Available,” “Only access points,” or “Only computer-to-computer” depending on the type of networks to which you connect. Tap ok to close this screen. Note: If you select to connect to non-preferred networks, your CN3 detects any new networks and provides configuration opportunities.
Chapter 5 — Network Support Loading Certificates If you choose to use Transport Layer Security (TLS) with WPA or 802.1x security, you need to have a unique client certificate on the CN3 and a trusted root certificate authority (CA) certificate. If you choose to use PEAP, you need to load a root CA certificate. You can use a third-party CA to issue unique client certificates and a root certificate.
Chapter 5 — Network Support Encryption AES (Advanced Encryption Standard) A block cipher, a type of symmetric key cipher that uses groups of bits of a fixed length called blocks. A symmetric key cipher is a cipher using the same key for both encryption and decryption. As implemented for wireless, this is also known as CCMP, which implements AES as TKIP and WEP are implementations of RC4.
Chapter 5 — Network Support Authentication (continued) LEAP (Lightweight Extensible Authentication Protocol) Also known as Cisco-Wireless EAP, provides username/password based authentication between a wireless client and a RADIUS server. In the 802.1x framework, traffic cannot pass through a wireless network access point until it successfully authenticates itself. EAP-PEAP (Protected Extensible Authentication Protocol) Performs secure authentication against Windows domains and directory services.
Chapter 5 — Network Support SmartSystems™ Foundation Use the SmartSystems Foundation (www.intermec.com/SmartSystems) to configure and manage your network. You can also contact your Intermec representative for support. This tool, available as a free download from Intermec, includes a management console that provides a default method to configure and manage Intermec devices “out-of-the-box,” without the purchase of additional software licenses.
Chapter 5 — Network Support 186 CN3 Mobile Computer User’s Manual
I Index CN3 Mobile Computer User’s Manual 187
Index Numerics 1D area imager reading distances, 8 802.11 ISpyWiFi utility, 150 WPA authentication Zero Configuration, 179 WPA authentication with pre-shared key Zero Configuration, 179 WPA2 authentication Zero Configuration, 180 WPA2 authentication with pre-shared key Zero Configuration, 180 zero configuration WEP encryption, 178 802.1x authentication Funk, 159 802.
Index Beeper enabling via Sounds & Notifications applet, 12 volume turning it on, 22, 25 Block recognizer Windows Mobile input panel, 35 Bluetooth, 120 Audio applet, 119 audio device settings, 122 connecting to headsets, 121 connecting with remote devices, 123 connection status, 120 default status, 120 enabling for SF51 Scanners, 96 intermec settings, 122 searching for headsets, 119 wireless manager, 111 Wireless Printing applet, 116 Bluetooth applet, 97 address assigned to CN3, 97 Bluetooth Audio applet B
Index Connections ending, 147 to an ISP, 140 via modem, 140 to work, 143 via VPN server, 145 via modem to an ISP, 140 via VPN server to work, 145 via wireless network, 177 Contacts adding a note, 57 adding a telephone number GSM/EDGE radios, 137 assigning to a category, 58 changing, 57 changing options, 60 copying, 58 creating, 55, 57 deleting, 59 finding, 59 Pocket Outlook, 55 sending a message, 58 Start menu icon, 31 synchronizing, 56 viewing, 56 Converting writing to text, 36 Converting writing to text
Index H Headsets connecting, 121 discovering, 119 setting to default, 121 I iConnect, 148 disabling network communications, 148 network support, 147 ping test, 149 Idle mode, 19 IDLs Bluetooth, 110, 116 device resource kit, 84 smartsystems, 102 URL, 21 Imager beeper volume turning it on, 25 configuration parameters, 98 Images capturing via camera, 14 IMAP4 Folder behavior connected to email server, 65 Input panel block recognizer, 35 keyboard, 34 letter recognizer, 35 selecting typed text, 35 transcriber
Index adding to appointments, 50 contacts, 57 creating a note, 62 drawing on the screen, 38 creating a drawing, 38 selecting a drawing, 38 Pocket Outlook, 61 recording a message, 38 synchronizing notes, 62 writing on the screen, 36 alternate writing, 37 converting writing to text, 36 selecting the writing, 36 tips for good recognition, 37 Loading certificates, 182 Microsoft, 170 M Managing email messages and folders via Messaging, 64 Meetings Calendar sending a request, 52 via Calendar, 46 Messages sendi
Index Phone Settings applet CDMA roaming range, 134 customizing via Phone application GSM radios, 131, 138 GSM radios, 131, 138 network settings GSM/EDGE radios, 139 Pictures & Videos applet audio, 96 compression, 95 configuring the camera, 94 pixel size, 94 rotating the image, 94 screensaver, 95 slide show, 95 storing images, 95 type of image, 95 video time limit, 96 Ping test iConnect, 149 Pixels, camera, 94 Pocket Internet Explorer Start menu icon, 31 Pocket Outlook Calendar, 46 POP3 Folder behavior con
Index SMS Folder behavior connected to email server, 64 Sounds & Notifications applet enable beeper, 12 set vibrator, 26 Speakers, 21 beeper volume turning it on, 22 enabling via Intermec Settings applet, 22 Speed dial phone application GSM/EDGE radios, 137 SSPB packaging an application, 78 Start Menu adding programs, 43 via ActiveSync, 44 via File Explorer, 43 Static WEP security Funk, 161 Status icons Windows Mobile, 31 Storing images, camera, 95 Synchronize system time, 91 Synchronizing Calendar, 46 con
Index WEP encryption EAP-FAST security method, 172 zero configuration, 178 Wi-Fi Protected Access, 157, 183 Windows Media files Windows Media Player, 72 Windows Media Player Mobile Start menu icon, 32 Windows Mobile ActiveSync, 44 basic usage, 30 Calendar, 46 command bar, 32 Contacts, 55 Excel Mobile, 69 getting connected, 139 Messaging, 63 navigation bar, 32 Notes, 61 notifications, 32 popup menus, 32 PowerPoint Mobile, 71 programs, 31 status icons, 31 support URLs, 30 Tasks, 60 Today screen, 30 where to
Index 196 CN3 Mobile Computer User’s Manual
Corporate Headquarters 6001 36th Avenue West Everett, Washington 98203 U.S.A. tel 425.348.2600 fax 425.355.9551 www.intermec.
