User`s manual

Chapter 1 — Using the CN3
CN3 Mobile Computer User’s Manual for Windows Mobile 6.1 25
The Ready-to-Work indicator (blue light) is for the SmartSystems
Foundation application that is part of a wireless network using all
Intermec devices. Selected application software programs, such as TE
2000 or Intermec Terminal Emulator, may also use the indicator for
other purposes. For more information, see “Managing the CN3
With SmartSystems Foundation” on page 42.
Using the Imager
The area imager in the CN3 can perform multiple tasks:
• Reading bar codes, including 1D, 2D, and composite symbologies
and postal codes. For more information, see the next section,
“Reading Bar Codes.”
• Capturing images. Use the imager like a digital camera to take
high-quality, grayscale pictures. For more information, see
“Capturing Images” on page 29.
• Capturing signatures. Use the imager to “photograph” signatures
on business forms, or to capture onscreen signatures or line
drawings. For more information, see “Capturing Signatures” on
page 32.
Ready-to-Work
indicator™
Blue The CN3 is suspending or resuming with the
display turned off.
TE 2000 or Intermec Terminal Emulator
(ITE) is running and connected to the host.
Blinking
blue
TE 2000 or ITE is running but not connected
to the host.
Off TE 2000 or ITE is not installed or not
running.
Understanding the LEDs (continued)
LED Color Description
Note: The blue light may stay on for up to 30 seconds, but will usually
turn off after less than 10 seconds. During this time, do not toggle the
CN3 on or off and do not remove the battery. If the computer seems
to behave erratically, first try warm booting and then cold booting the
CN3 as described in “Resetting the CN3” on page 97.