User`s manual

Chapter 3 — Configuring the CV30
36 CV30 Fixed Mount Computer User’s Manual
• Stores the wireless printing COM port in the registry as the
WPort
Specifically, the current wireless printer is registered and
deregistered on Bluetooth stack load/unload. If you select a
different current wireless printer, the existing wireless printing
COM port is deregistered and the new one is registered instead.
The Wireless Printing applet uses the Bluetooth COM Port
Control to handle COM port registration/deregistration.
Selecting the Current Wireless Printer on the CV30
By default, there is no current wireless printer selected on the
CV30.
There are three ways to select the current wireless printer:
• Discovering the printer using Bluetooth device discovery
• Manually entering the printer’s Bluetooth device address
• Choosing the printer from a list of previously discovered
printers
To discover the printer with Bluetooth device discovery
2 Tap Search to initiate printer discovery. All Bluetooth printers
discovered within range appear in the devices list.
3 Select the printer you want to connect to and then tap OK.
1 Select Start > Settings > the Systems tab > Wireless
Printing. The Wireless Printing wizard appears.