User`s manual

Chapter 3 — Configuring the CV30
46 CV30 Fixed Mount Computer User’s Manual
2 Make sure you have selected Funk as your security choice.
3 Open Intermec Settings.
4 Choose Communications > 802.11 Radio > Funk Security
> Profile.
5 For Association, choose WPA or WPA2 and press Enter.
Encryption automatically defaults to TKIP if you are using
WPA. Encryption automatically defaults to AES if you are
using WPA2.
6 For 8021x, choose TTLS, PEAP, EAP-FAST, or TLS and
press Enter.
If you choose TTLS or PEAP:
a For Prompt for Credentials, choose Enter credentials
now.
b Select User name and type your user name.
c Select User Password and type a user password.
d For Validate Ser ver Certificate, choose Yes.
If you choose TLS:
a Load a user and root certificate on your CV30. For help,
see “Loading a Certificate” on page 61.
b For Validate Ser ver Certificate, choose Yes.
c You must enter a User Name and Subject Name. You can
also enter a Server Common Name if you want to
increase your level of security.
7 Exit Intermec Settings.
Note: You can use Prompt for credentials to
troubleshoot your connection to the network if you have
problems.
Note: You must have the date on the CV30 set correctly
when you enable Validate Server Certificate.