User`s manual

Chapter 3 — Configuring the CV30
48 CV30 Fixed Mount Computer User’s Manual
c Select User Password and type a user password.
d For Validate Ser ver Certificate, choose Enabled.
If you choose TLS:
a Load a user and root certificate on your CV30. For help,
see “Loading a Certificate” on page 61.
b For Validate Ser ver Certificate, choose Yes.
c You must enter a User Name and Subject Name. You can
also enter a Server Common Name if you want to
increase your level of security.
8 Exit Intermec Settings.
Configuring LEAP Security on the CV30
1 Make sure you have selected Funk as your security choice.
2 Make sure you have configured the communications and
radio parameters on your CV30.
3 From Intermec Settings, choose Communications > 802.11
Radio > Funk Security > Profile.
4 For 8021x, choose LEAP.
5 For Association, choose Open, WPA, WPA2, or Network
EAP. Encryption automatically defaults to TKIP if you
choose WPA, to AES if you choose WPA2, and to WEP if
you choose Open or Network EAP.
6 For Prompt for Credentials, choose Enter credentials now.
7 Select User name and type your user name.
8 Select User Password and type a user password.
9 Exit Intermec Settings.
Configuring Static WEP Security With Funk Security
1 Make sure you have selected Funk as your security choice.
2 Make sure you have configured the communications and
radio parameters on your CV30.
Note: You can use Prompt for password to troubleshoot your
connection to the network if you have problems.