User`s manual

Chapter 3 — Configuring the CV30
CV30 Fixed Mount Computer User’s Manual 55
7 Tap Get Certificates to obtain or import server certificates.
For help with certificates, see “Loading a Certificate” on
page 61.
8 Tap Additional Settings to server certificate validation and
trust.
9 Check Validate Server Certificate to verify the identity of the
authentication server based on its certificate when using TLS.
10 Tap Root CA, select a root certificate, and then tap OK.
11 Enter the Common Names of trusted servers.
12 Tap OK.
Configuring TTLS Security With Profile Wizard
TTLS protocol provides authentication like EAP-TLS but does
not require user certificates. User authentication is done using a
password or other credentials that are transported in a securely
encrypted “tunnel” established using server certificates.
To configure TTLS security
1 In the Profile Wizard, select the Security page.
2 For 8021x Security, choose TTLS.
3 For Association, choose Open, WPA, WPA2, or Network
EAP.
4 For Encryption, choose TKIP or AES if you selected WPA2
for association, or WEP or CKIP if you selected Network
EAP for association.
5 For Username, type a unique username for this protocol.
6 In the Password field, type a unique password for this
protocol.
7 Select Prompt for password to have the user enter this
password each time to access the protocol, or select Use
following password to use the protocol without entering a
password each time you use the CV30.
8 (Optional) Tap Get Certificates to obtain or import server
certificates. For help with certificates, see “Loading a
Certificate” on page 61.