User`s manual

Chapter 3 — Configuring the CV30
56 CV30 Fixed Mount Computer User’s Manual
9 Tap Additional Settings to assign an inner TTLS
authentication, inner EAP, and set options for server
certificate validation and trust.
10 From the Inner TTLS Authentication list, choose PAP,
CHAP, MS-CHAP, MS-CHAP-V2, PAP/Token Card, or
EAP.
11 If you select EAP for the inner authentication protocol, select
and inner EAP protocol form the Inner EAP list.
12 Check Validate Server Certificate to verify the identity of the
authentication server based on its certificate when using
TTLS.
13 Tap Root CA, select a root certificate, and then tap OK.
14 Enter the Common Names of trusted servers.
15 For Anonymous EAP-TTLS Name, type an outer identity to
protect your login name or identity.
16 Tap OK.
Configuring LEAP Security With Profile Wizard
LEAP is the Cisco Lightweight version of EAP.
To configure LEAP security
1 In the Profile Wizard, select the Security page.
2 For 8021x Security, choose LEAP.