User`s manual

Chapter 3 — Configuring the CV30
CV30 Fixed Mount Computer User’s Manual 63
4 From Intermec Settings, select Communications > 802.11
Radio > Certificates.
5 Select Import Root Certificates = False. Choose Tr ue from
the drop-down menu.
6 Select Import User Certificates = False. Choose Tr u e from
the drop-down menu.
7 Exit Intermec Settings and save your settings. The certificates
are immediately imported:
a All root certificates in \Temp\Root are imported into the
Trusted Authorities certificate store.
b All certificate and key files in \Temp\User are imported
into the My Certificates certificate store.
c The Import Root Certificates and the Import User
Certificates settings are changed from Tr ue to False.
8 Configure your CV30 for WPA, WPA2, or 802.1x security.
Disabling Security
If you choose not to use security with your wireless network, you
can disable it on the CV30. Intermec recommends that you
always set security in your network.
To disable security
1 Open Intermec Settings.
2 Choose Communications > 802.11 Radio > Microsoft
Security.
3 For Network Authentication, choose Open.
4 For Data Encryption, choose Disabled.
5 Close Intermec Settings.
Note: You are prompted when a root certificate is
imported, unless that certificate is already in the store.