User manual

Appendix A — Specifications and Default Settings
CV41 Vehicle Mount Computer (Windows Embedded Standard) User Manual 107
Default Configuration
The following tables list the default values of the configuration
settings supported on the computer. If you restore the computer to
factory default settings, the computer uses these values.
The settings are grouped by function and reflect the organization of
Intermec Settings. Not all of the configuration settings are listed in
this appendix. For detailed information on most of the settings, see the
Intermec Settings Command Reference Manual.
Data Collection Settings
Use data collection settings to configure the Bluetooth or tethered
scanner and to configure the bar codes that you want the imager to be
able to read.
Data Collection Settings
Data Collection for Tethered Scanner Setting Default Value
Tethered-Configure On Connect Overwrite with computer
settings
Enable USB Scanner Aut-Detect Off
Enable Scanner Port Off
Bluetooth-Configure On Connect Overwrite with computer
settings
Symbology Settings
Symbology Default Value
AustraliaPost Disable
Aztec Disable
BPO Disable
CanadaPost Disable
Codabar Disable
Codablock A Disable
Codablock F Disable
Code 11 Disable
Code 39 Enable