User manual

Chapter 1 — About the Computer
10 CV41 Vehicle Mount Computer (Windows Embedded Standard) User Manual
About the CV41 Startup Behavior
Change the startup behavior so that the computer can be turned on
and off through the ignition input signal of a vehicle or when power is
applied to the smart dock. For more information about the startup
behavior, see the following table.
Select a Startup Behavior
By default the computer startup behavior is set to standard. If you
intend to startup your computer using ignition control or auto-on,
make sure you wire the ignition input wire according to the CV41
Vehicle Mounting Kit Reference Guide.
1 Tap Start > Control Panel > AutoOn. The Ignition and Auto-On
Properties screen appears
2 Select the startup behavior.
3 Tap OK.
CV41 Startup Behavior Descriptions
Startup Behavior Description
Standard The computer is turned on and off manually using the
Power button on the computer.
Ignition control When vehicle power is applied, the computer turns on.
Make sure that the:
• power switch on the smart dock is on.
• the ignition input wire is connected.
Auto-On The computer is turned on when power is applied:
• power switch on the smart dock is on.
• the ignition input wire is connected.
You must wire the ignition input wire before enabling ignition
control or auto-on.