User manual

Chapter 4 — Configure the Computer
68 CV41 Vehicle Mount Computer (Windows Embedded Standard) User Manual
8 For Encryption, choose WEP.
9 Define a value for the keys you want to use. You can define up to
four keys (Key 1 through Key 4).
Enter an ASCII key or a hex key that is either 5 bytes or 13 bytes
long depending on the capability of the radio. Set a 5-byte value for
64-bit WEP or a 13-byte value for 128-bit WEP. Hex keys must be
preceded by 0x and contain 5 or 13 hex pairs.
10 For Transmit key, choose the key you want to use for transmitting
data.
11 Save your settings.
Use Open (No Security) Associations with Wireless Security
Use the following procedure to configure your computer for open
security using Wireless.
1 Start Intermec Settings.
2 Choose Communications > 802.11 Radio > Wireless Security.
3 Select the active profile you are using.
4 For Association, choose Open.
5 For Encryption, choose None.
6 Tap OK. Your settings are saved.