User manual

Chapter 5 — Use WWAN and GPS Communications
76 CV41 Vehicle Mount Computer (Windows Embedded Standard) User Manual
About GPS
The GPS receiver in the computer can deliver standards-based
National Marine Electronics Association (NMEA) data strings to GPS
applications. To use the GPS receiver, you need to:
• enable WWAN communications.
• install an external GPS antenna to the CV41. For more
information, see “Connect an External Antenna” on page 21.
For more information on purchasing an external GPS antenna,
contact your local Intermec representative.
Test the GPS Receiver
Use this section to learn how to test the GPS receiver.
1 Make sure WWAN communications is enabled. For more
information, see “Use WWAN and GPS Communications” on
page 71.
2 Make sure an external GPS antenna is connected. For more
information, see “Connect an External Antenna” on page 21.
3 Select Start > All Programs > OneClick Internet > OneClick
Internet.
4 Tap the GPS button. The coordinates for your location are
displayed. To show your current location in Google Maps, tap
Track Me.
Configure WWAN Settings
Configure your connection settings to AutoLaunch the OneClick
Internet application on startup, connect to WWAN automatically, or
to reconnect to WWAN when a connection is available.