User guide

Chapter 4 — Configure the Computer
CV61 Vehicle Mount Computer (Windows 7) User Guide 47
4 Perform one of these items based on the type of scanner you are
connecting:
For an SR30 or SR61T scanner, tap Scanner Settings, select SR
Intermec Scanner, and then tap OK.
For an ASCII scanner, tap Scanner Settings, select ASCII, and
then tap OK. Set up the appropriate COM port settings by
selecting Scanner Port Settings.
5 Tap Enable scanner port.
6 Check the Enable scanner port check box and tap OK.
Connect to a Bluetooth Scanner
You can connect the computer to an Intermec Bluetooth scanner, such
as the SF51 or SR61.
1 Enable Bluetooth communications.
2 Tap Start > Control Panel. The Control Panel appears.
3 In the View by: drop-down menu, select either Large or Small
icons.
4 Tap Bluetooth Scanning. The Bluetooth Scanning application
appears.
5 Tap Add Scanner.