User guide

Table Of Contents
Appendix B — ScanNGo Wi-Fi Configuration Bar Codes
100 CV61 Vehicle Mount Computer (Windows XP) User Guide
Radio Configuration Bar Codes
Use the following ScanNGo bar codes to enable the 802.11 radio and
set the defaults for either Wireless security or Microsoftsecurity. After
you scan the bar codes, you will still need to use Intermec Settings or
another configuration program to set network-specific settings on
your computer and to configure the wireless security.
The following ScanNGo bar codes were created using SmartSystems
Foundation. For more information on SmartSystems Foundation, see
“Manage the Computer Using SmartSystems Foundation” on
page 24.
2D Configuration Bar Codes
You can configure the computer with a 2D imager.
1 Scan the appropriate bar code from the table and wait for the
program to start.
2 Follow any instructions on the device.
2D Imager Radio Configuration Bar Codes
Note: If you are using Microsoft security, you can only use the 1D
configuration bar codes.
When You Want To: Scan This Bar Code
Set all communication settings to defaults
(Wi-Fi, WWAN if applicable)
Enable Wi-Fi - set Wireless security to defaults