User guide
Table Of Contents
- Send Feedback
- Before You Begin
- Chapter 1 - About the Vehicle Mount Computer
- Chapter 2 - Understand the User Interface and Intermec Applications
- Chapter 3 - Manage the Computer
- Chapter 4 - Configure the Computer
- Chapter 5 - Troubleshoot and Maintain the Computer
- Chapter 6 - Upgrade the CV61 Vehicle Mount Computer
- Appendix A - Specifications and Default Settings
- Appendix B - ScanNGo Wi-Fi Configuration Bar Codes

Chapter 1 — About the Vehicle Mount Computer
CV61 Vehicle Mount Computer (Windows XP) User Guide 11
Enable the Heated Touch Screen Defroster
If you have a heated touch screen defroster, use it to help reduce
condensation on the display when you are moving between
sub-freezing and normal temperatures.
Use the following procedure to learn how to turn the heater on, off, or
leave it on an automatic setting. When the defroster is set to
automatic, the defroster automatically turns on when the external
temperature reaches 3
°C (37 °F) and below, and turns off when the
temperature reaches
5 °C (41 °F).
1 Tap Start > Control Panel > CV61 Properties.
2 In the Heater section, select Heater On, Heater Off, or Automatic
On/Off.
3 Tap Apply to save your changes.
4 Tap OK to exit the CV61 Properties menu.
Install an External Antenna
You can purchase an antenna to mount on a wall, forklift, or other flat
surface using either screws or small patches of adhesive-backed hook
and loop fastener material.