User guide

Chapter 4 — Configure the Computer
40 CV61 Vehicle Mount Computer (Windows XP) User Guide
For help using Intermec Settings, click Help > Contents. For
information on all of the parameters in Intermec Settings, see the
Intermec Settings Command Reference Manual.
Create and Enable Custom Profile Settings
You can create custom profile settings to ensure optimal performance
of the CV61 in specific scenarios. Once you create a custom profile
setting, enable it with Intermec Settings.
1 Make sure you have created a custom profile for your computer.
2 Tap Start > All Programs > Intermec > Profile Settings.
3 Select the profile you want to enable.
About Network Communications
You can easily add the computer to your wireless or wired data
collection network. You can connect your computer using:
• 802.11a/b/g/n radio communications.
• Bluetooth communications.
• USB and serial communications.
Configure 802.11a/b/g/n (Wi-Fi) Radio Communications
The computer contains an 802.11 radio to transfer data using wireless
communications and to support the TCP/IP network protocols. This
section of the manual assumes that your wireless network is set up,
including your access points.
Note: For more information on how to create your own custom
profiles, go to the Intermec Developer Center website at
www.intermec.com/developer/resources/CustomProfiles.aspx
Make sure all components with antennas are at least 30 cm (1 ft)
apart when power is applied. Failure to comply could result in
equipment damage.